I bought one to see if I really wanted to get back into vinyl. Turns out I do, and the LP60X has been a terrific way to confirm! So far, mine has been faultless. A couple of general pieces of advice before you purchase: understand that you will need both some form of amplification and speakers. That means either an integrated or power amp, or a receiver--which many will already own. If you have either of those, you can use them with passive speakers. Or you can skip the amp/receiver if you have or buy powered speakers, as nloop recommends. Secondly, be sure to familiarize yourself with the switch on the back of the unit that toggles between line-out and phono. If you select the latter, the turntable will assume you are using a phono pre-amp, and will output low-volume, poor-quality sound. If you are not using a phono pre-amp (and it is likely that few who buy this turntable will), then be sure to select line-out before connecting to the amp/speakers. There are many better turntables out there, some costing more than a small house. But this is an excellent way of figuring out if vinyl is for you before you spend significantly more on a better system. Only one caveat: this will *not* play 78rpm records. If you have a collection of 78s, you will have to look elsewhere.
There is a model of this turntable that has Bluetooth. Mine does not, which is why I use a separate amplifier. If you get the bluetooth model, you could obviously use bluetooth speakers, as long as they are self-powered (almost all are). I believe the Bluetooth model of this turntable is the AT-LP60XBT.@@Heshkinp
I just ordered this and some speakers. I can listen to my dad's old records now! Idk if I'll like any of them and I don't recognize any of the artists but I'm going to listen to them blind on this record player when it gets here. Thought it would be something nice to do on the anniversary of his passing next month.
I kind of want to get one of these for a couple of reasons. It seems like a good starter one that won't run me a ton of money to set up. And I don't think this would be a hobby I get into too much. I just want the big cover arts to my favorite albums and then I'll give them a spin every now and then.
@@pavaomrazeki mean not everyone is an audiophile, i can appreciate some better audio quality but i do not need it at all, after a few years i'll sell this one and buy a rt82 or something similar that comes out between now and then
I have this turntable, connected to the fantastic Marrantz PM700N 2 channel amp (2 x Dali Oberon On Wall speakers and an SVS SB-100 Pr 12 inch sub).The Sound is great. I do have to adjust levels and volume when switching sources. My next step is looking for a preamp for a more consistent listening exeperience. Overall I've been impressed with this entry model and had it 3 years now and I don't see the need for upgrading it yet.
I just got my first vinyl album , The English Riviera by Metronomy. Dropped it immediately as i walked past the cashier. It hit the corner and damaged a bit of the sleeve sadly but the record disc is fine. I'm now looking into vinyl turntables and found your video, thank you for your helpful review of it.
Hi everyone. Unfortunately I'm still new to all this and don't know much about record players. Can you please help me? I would like to buy my brother a record player for his birthday. He's slowly getting into it and is now very interested in vinyl records. Do you think the AT-LP60X or the AT-LP60XBT would be better? What exactly is the difference? I read something on the Internet about the Bluetooth connection. Does that mean that the AT-LP60X doesn't have Bluetooth or what does the BT stand for on the AT-LP60XBT? Or does it work in reverse? So if my brother also wants to listen to records on his headphones, would that work with both or would only the AT-LP60XBT work? Thank you!
I got this wonderful turntable to modernify my setup over my older Technics SL-J110 that I got from a family member. I use it with both powered speakers and an amp setup depending on where I am. I only wish this turntable had anti-skate or the ability to change cartridges. But for the price I don't expect that kind of modularity. Otherwise, it's a purchase I definitely haven't regretted one bit.
I just got that TT on Wednesday hooked up my Marantz SR 5200 and my paradigm reference speakers It sounds like a CD player it's amazing ! I bought my first album for it now I'm going to hunt for more!
Hello my friend you are saying your unit sound like cd player but I have the same unite the sound is ok but not same as cd player is less power sound and I don’t know why are you using ground wire or external pre-amp.
Since this is an entry level turntable what are your thoughts about using a record weight with it? Update - nevermind. I contacted Audio Technica and told them my main concern was damaging the bearings, belt or motor. They responded by saying they don't support or recommend a record weight with the AT-LP60X.
Thank you so much. I was about to spend 100 dollars on the "amazon recommended" player, as that is the only thing amazon was pushing me towards. Thanks for saving me the headache
This is a perfectly fine turntable, and sounds very good indeed; however, you CANNOT upgrade the stylus with any of those others that you showed…the cartridge is an AT-LP3600L, and it will only take - for this turntable - another ATN3600 stylus. I believe that LP Gear sells an eliptical ‘upgrade’ stylus for it, but at this tracking force of 3gms, I wouldn’t recommend it (too sharp for this weight - which is perfectly fine for the supplied spherical/conical stylus). Other than that, it’s a great turntable, and won’t hurt your records, but will play them well with plenty of detail, and a lovely overall sound presentation.
Every beginner has been sold on the LP60X, and it happens for all the reasons it should. It's minimal fuss, doesn't bog you down, and competes with more expensive turntables in audio quality.
@@Stellaaa1989 Me or Ashton? If you mean me, I've had the LP60XBT for coming up to 2 years now. Not a daunting to use turntable at all, very user friendly and sounds great. The Bluetooth version is a massive bonus.
Is the tracking force still okay? I remember a few years ago the lp60 was known for having a low tracking force making it the best budget turn table out there
Question: Is this setup good? LP60x > Aiyima T8 6n3 Preamp > Fosi V3 Power Amp > Kanto Yu4 passive speakers. I'm particularly hexed at the preamp. I don't think the Aiyima T8 6n3 is a phono amp, so how could I connect the turntable to it? Via Phono or Line output? Thanks!
Thank you for the great review. My AT-LP60 arrived today. I set it up and connected it to my Onkyo TX-NR787 receiver. I tried the built in amp and the one in the receiver. They pretty much sound the same. The sound is very muddy and boomy. The high and middle frequencies are missing and the bass is very boomy. Am I doing something wrong. Should I get an external pre-amp. I tried different RCA cables and the results are the same. As a last measure, I hooked up the turntable to my Roland R5 and then my Zoom 4N recorders and recorded the sound to these recorders. I then played back from the two digital recorder into the receiver. The quality improved somewhat. So what do you think it is. Do I have a faulty unit or the built-in preamp is not that good. I am surprised that my Onkyo phono pre-amp did not improve the sound at all. Any idea what is going on. I bought this from B&H in New York. They are my photography equipment vendor of choice. They will take the unit back and replace it if it is defective. Any help will be appreciated. Thanks.
Your receiver is kind of high end for this table. I suggest you upgrade to the LT120 series or even LT-140. Both are high fidelity clones of the venerable Technics SL1200 dj tables.
@@bpalpha Thank you for getting back to me and the advice. I am familiar with the SL1200. We had one at our college's TV studio that I used back in the late 80's. For our productions, I was playing licensed music on LP on the SL1200 and recording it to a 1/2" Tascam reel-to-reel recorder. The sound of the SL1200 was fantastic and foolishly I was anticipating a similar sound from the LP60. All the reviews say it is decent but what I have for sound is far from decent. It is outright unacceptable. My wife wanted a turntable and I wanted to go the cheap route not knowing if she will lose interest and I will have wasted my money. As it turns out she loves it and has bought a few records already. She is ok with the sound. I am the one who is being critical. It is outright painful listening to the sound coming from the LP60! For higher end players I was looking at the LP-120, the Fluance RT 82, RT 83 class players or even higher. I just wanted to get by for 2023 and upgrade next year. I have a 5.1 speaker set up with RSL CG25 speakers and their excellent Sub. CD's in particular and Pandora and Spotify sound fantastic on my speaker/receiver combo. What to do? I wanted to limit the budget to less than $400. Any other suggestions besides LP120 and LP140? Thanks.
@@boristahmasian9604 There could possibly be an issue with your setup, or your LP60 perhaps. I have a Fluance RT85 running through a preamp to pretty good Klipsch speakers, and it sounds amazing. In another room, I have the LP60 connected to Fluance speakers. I continue to be surprised at how well it holds its own. It's not as good as the Fluance, but in no world would I call the sound "unacceptable", and most reviewers who I'm sure have better ears than I do would say the same. The bad sound quality you're describing I have definitely heard on other budget record players, but not the LP60.
@@Flashback_Funhouse Thank you for your reply. I sent the LP60 back and got a Fluance RT82 and the sound through my Onkyo receiver is still bland. Not wanting to spend a lot more on this new hobby we have picked up I ordered a DJPre-II preamp and got very good sound out of the RT82. The issue is the DJPre has a low buzzing and crackling noise I can't get rid of. I tried different RCA and grounding cables to no avail. Finally I narrowed the problem to the RCA jacks in the back of the DJPre. They are too close to each other and create a terrible crosstalk that does not go away no matter what you try. I tired and sent two of those back that had the same problem. Finally I got a Fosi Box X2 and this one is a solid, quiet unit but sonically it does not sound as good as the DJPre. I may have to go to a Mani2 or iFi Zen for better quality. What are you using for preamp for your RT85?
3:57 wait, so i can skip a track and rewind a track with these buttons right? do i have to know where to move it to play a specific track and the lower the stylus from the buttons? how does it work(if it even works like that)?
im new into this type of stuff and im doing this stuff for a sibling, so i have a few questions: do i need one of those pre amps to connect it to a speaker monitor? and is this everything i need: speaker, subwoofer, and record player? and is there anything i should know before i get into this? thanks!
I am torn between the LP60X Versus LP60XBT. So it I get the BT version, I don’t have to use it as if it as Bluetooth version? Does it come with the cables to do do? Great review! Also, it’s for my 24 year daughter, that has never used a TT or vinyl!
Hi im new to lp players. you say you don’t need and amp if you use active speakers. Does a bluetooth speaker count as active speaker? So if i put the headphonejack in the bluetooth speaker to the lp player will that work ?
You can only connect it to headphone jack with phono to aux (Granted I haven't tried this) The best way is to plug it with USB to the bluetooth speakers since most of them have a usb connector
It depends on the type of speaker, but in theory, yes! You would need the right cable setup, and without seeing your BT speaker I'm not sure which cables would work best. The LP60X comes with RCA phono out cables, so you'd either need a new set of cables to go from the BT speaker into the Turntable, or a RCA to aux adapter set of cables.
Great video! This totally sold me on this model. Can you recommend a good pair of wired headphones that are quality but don't necessarily break the bank either? A longer wire would be preferred too. Thanks in advance!
Hi, I'd recommend Sony MDR-7506. They are around $75.00 I love the sound and I bought them based on the reviews I've read. They are wired headphones and the cord is about 4 ft, so it sounds like they'd be good for you. Best, JK
Honestly I have been thinking abt buying a turn table Js didn’t know where to start and this video helped a lot and thx for not taking years over a review (also what speakers would u recommend)
Bought one of these, had to send it back, wouldn’t connect to Bluetooth speakers, tried plugging in speakers still wouldn’t connect. Just got a very quiet sound coming out the record player. Not sure if I set it up wrong or if I got a faulty one. Slightly put off these now though.
@@nloopBluetooth is stupid. You want vinyl because you want to savour the last drop of sound quality juice. That same spark of vividness that is lost with Bluetooth.If you want to use Bluetooth do it yourself a favor use digital streaming platforms with no high res , just compressed sources. To use Bluetooth from vinyl implies you have to convert analogue to digital with a low cost device like this then compress with Bluetooth and then use usually a headphone which in general has no Audiophile quality. That is ok with low res streaming. But you are dealing with vinyl because you want to appreciate that little difference in quality. Bluetooth, away
Hey I have a pretty simple question. Lets say I were to buy the Bluetooth model of this turntable. Would I still be able to buy wired speakers and connect them wired to the turntable even if it’s the Bluetooth model? And still get that same good analog sound quality? I’m thinking of buying the Bluetooth model in case I want to connect it to something else, but most of the time just connect it to some wired speakers such as the Edifier R1280T speakers for example.
@@nloop thx! and one more question, what do you think are the best budget speakers for under $200? If it matters, I play allot of hip hop music so I’m trying to find speakers with good bass
@@nloophey again ik I’ve been asking allot of questions but I’m just trying to get the perfect setup for me 😭 anyways would you recommend buying the Audio Technica LP3 over the LP60x being that it is atleast $50 more? Thinking of getting it because of the upgradable cartridge and hoping even with just everything it comes with it sounds better than the lp60x
@@panther_- I unfortunately have not tried the LP3, but to this day still the the LP60X is one of the best starting ones for the money. If you buy on amazon or at best buy you could always return products that don't quite work for you!
I have an Audio-Technica AT-LP60X turntable hooked up to my Sony STR-DN1080 receiver to the CD input, since this receiver doesn't have a photo input, and the turntable set to line. Using this setup my subwoofer keeps cutting out. Is this because of the turntable built in preamp not being the best? Do I need to buy an external preamp to solve this issue?
Looking to get a new speaker for this turntable! Just wondering if there will be a big difference if I connect the turntable by bluetooth instead of analog?
Hello, I have the version of this one but not with Bluetooth included. Can you help me with the setup, do I need some speakers ? an amp ? or this is the same as the one presented in the video ?
Great video! I learned so much and have decided to invest in this turntable. I have a question though for speakers. I’m not too familiar with the plug in situation, but would the Micca MB42-C center channel speaker work with this turntable? I’m not ready to spend $139 on the other Micca speakers when I’m not sure how to use them.
"the logos are everywhere" there's only three... two on removable pieces to ensure you're getting authentic equipment when replacing them, and another on the main unit itself.
Thanks for this video but i dont understand some stuff. where do i get rca cable and how do i find rca speakers in the shops near me. all they have is AUX speakers.
Hi! On the back, it It does on the back, and the fidelity should be just as good as hooking it up to speakers, as long as the headphones are great! Just note that there's no volume control on the turntable itself, so you may want to invest in a phono-amp instead so you can control the volume.
You will need speakers as there are none built in. If you don't want to buy an amplifier or a receiver, then select powered speakers, which can be plugged directly into the turntable. There are many reasonably-priced options out there. NLoop explains how to connect them in the video.
Yes, you can! In the video I explain the types of speakers that will work. But if you go in my channel, all the speaker reviews I have up right now will work perfectly with this turntable!
You have to manually lift up the needle and set it down on the record area in which that track starts. Use the up and down buttons, do not use your hands to lower it. Tracks are indicated by a thicker groove on the vinyl itself. This will be the same on any turntable out there
Hi i have a question! I have a denon avr x2200w and it doesn't have phono inputs. Can i use line on the Audio Technica and plug it into a RCA input on the Denon? Would that work or do i need a phono box?
The lp60x has a switch between line out and phono. If you choose line out you are using the phono preamp inside the turntable and so you can connect it to an amplifier or receiver. If you choose phone you MUST connect to a phono preamp or a receiver that has phono amp section. I tried it to an amp and the sound is thin with too highs and no lows that’s because de phono preamp is an amp with an equalization that increases bass and decrease highs. If your receiver lacks phono input you MUST choose line out … or buy a dedicated phono preamp.
The reason of adding an external preamp is that one can assume that the internal phono preamp is not of the best quality but it is difficult to say, it depends on the overall quality of your setup. If you want just it yo sound ok you DON’T NEED an external phono preamp if you choose line out
Hey! No it does not. In the video I talk a bit about the options you have for speakers, but I also have a video on my channel about the top 3 best speakers for vinyl records!
I would never propose a turntable with an arm like that. It's okay to save money, but not too much. There are no roegolations that allow you to change cartridge, when you want to improve the turntable. Reloop RT-3 USB costs only $ 60 more and already it realizes that it is higher; Then if you go to see the technical characteristics Wow and Flutter and Rumble is confirmed.
Short answer is no, I don’t think it’s worth it since I rarely use it. But some people may wanna use it all the time. I’m confused where you’re purchasing it from since it shouldn’t be that much more expensive! Check out the links in the video description as those have better retail pricing than what you listed.
@@nloop im Australian, so those numbers i put are the base costs of them over here, but i have found the non BT version on sale for 239 and the BT version on sale for 310 so a $70 gap. (The sony one for comparison is 295 here) also there is a lp60x usb version available too.
@@blaynesea8816 Goootcha. I'll be honest and say that I don't think Bluetooth is at all necessary as I never use it and you lose some of that feeling of pure analog audio... which is kind of the point of listening on record. It's a convenient but ultimately unnecessary feature for me personally.
I bought one to see if I really wanted to get back into vinyl. Turns out I do, and the LP60X has been a terrific way to confirm! So far, mine has been faultless. A couple of general pieces of advice before you purchase: understand that you will need both some form of amplification and speakers. That means either an integrated or power amp, or a receiver--which many will already own. If you have either of those, you can use them with passive speakers. Or you can skip the amp/receiver if you have or buy powered speakers, as nloop recommends. Secondly, be sure to familiarize yourself with the switch on the back of the unit that toggles between line-out and phono. If you select the latter, the turntable will assume you are using a phono pre-amp, and will output low-volume, poor-quality sound. If you are not using a phono pre-amp (and it is likely that few who buy this turntable will), then be sure to select line-out before connecting to the amp/speakers.
There are many better turntables out there, some costing more than a small house. But this is an excellent way of figuring out if vinyl is for you before you spend significantly more on a better system. Only one caveat: this will *not* play 78rpm records. If you have a collection of 78s, you will have to look elsewhere.
I’m confused, do you need an amp even if it already has a pre amp integrated?
@@ravlgarza Yes. Either an amp (a receiver would also work) or powered speakers. The preamp on its own is not sufficient.
@@meropealcyonecan u just use bluetooth speakers??
There is a model of this turntable that has Bluetooth. Mine does not, which is why I use a separate amplifier. If you get the bluetooth model, you could obviously use bluetooth speakers, as long as they are self-powered (almost all are). I believe the Bluetooth model of this turntable is the AT-LP60XBT.@@Heshkinp
"round edges, round buttons, looks boxy"
🤣
😂
😅😅😅😅
Goofy guy
I just ordered this and some speakers. I can listen to my dad's old records now! Idk if I'll like any of them and I don't recognize any of the artists but I'm going to listen to them blind on this record player when it gets here. Thought it would be something nice to do on the anniversary of his passing next month.
What do u use for speakers pls ? I have the record but I’m still searching for speakers.. thanks :)
@@supercutofus_did you ever find some?
I kind of want to get one of these for a couple of reasons.
It seems like a good starter one that won't run me a ton of money to set up.
And I don't think this would be a hobby I get into too much. I just want the big cover arts to my favorite albums and then I'll give them a spin every now and then.
I have to say this model is still an excellent choice, and vinyl is one of my favorite ways to enjoy my favorite music.
Same man just have a couple records but wanna listen to them more.
sounds exactly like me
Believe me, you will want to upgrade the cartridge over time, and you'll regret that you bought an entry level turntable with no upgrade options...
@@pavaomrazeki mean not everyone is an audiophile, i can appreciate some better audio quality but i do not need it at all, after a few years i'll sell this one and buy a rt82 or something similar that comes out between now and then
I have this turntable, connected to the fantastic Marrantz PM700N 2 channel amp (2 x Dali Oberon On Wall speakers and an SVS SB-100 Pr 12 inch sub).The Sound is great. I do have to adjust levels and volume when switching sources. My next step is looking for a preamp for a more consistent listening exeperience. Overall I've been impressed with this entry model and had it 3 years now and I don't see the need for upgrading it yet.
Love your setup!
Have you found a good preamp for it?
I just got my first vinyl album , The English Riviera by Metronomy.
Dropped it immediately as i walked past the cashier. It hit the corner and damaged a bit of the sleeve sadly but the record disc is fine.
I'm now looking into vinyl turntables and found your video, thank you for your helpful review of it.
That's an amazing album!
Happy to help!
Buy another one 👌🏽
Hi everyone. Unfortunately I'm still new to all this and don't know much about record players. Can you please help me?
I would like to buy my brother a record player for his birthday. He's slowly getting into it and is now very interested in vinyl records. Do you think the AT-LP60X or the AT-LP60XBT would be better? What exactly is the difference? I read something on the Internet about the Bluetooth connection. Does that mean that the AT-LP60X doesn't have Bluetooth or what does the BT stand for on the AT-LP60XBT? Or does it work in reverse? So if my brother also wants to listen to records on his headphones, would that work with both or would only the AT-LP60XBT work?
Thank you!
I got this wonderful turntable to modernify my setup over my older Technics SL-J110 that I got from a family member. I use it with both powered speakers and an amp setup depending on where I am. I only wish this turntable had anti-skate or the ability to change cartridges. But for the price I don't expect that kind of modularity. Otherwise, it's a purchase I definitely haven't regretted one bit.
Anti skate is built in
@@macraghnaill3553 Yes it does, however it is non-adjustable.
I just got that TT on Wednesday hooked up my Marantz SR 5200 and my paradigm reference speakers It sounds like a CD player it's amazing ! I bought my first album for it now I'm going to hunt for more!
Sounds great!
Hello my friend you are saying your unit sound like cd player but I have the same unite the sound is ok but not same as cd player is less power sound and I don’t know why are you using ground wire or external pre-amp.
Thus turntable with a pair of Edifier speaker + an active subwoofer, will take the audio experience to another level
Love the energy and vibe of this review! Subtle music connects it all together. Definitely closer to a decision on a return to the turntable!
Since this is an entry level turntable what are your thoughts about using a record weight with it?
Update - nevermind. I contacted Audio Technica and told them my main concern was damaging the bearings, belt or motor. They responded by saying they don't support or recommend a record weight with the AT-LP60X.
Didn’t know that, thanks for the update, really good to know for future upgrades!
I have the model without Bluetooth, great turntable, the only thing I don’t like is that there’s no clip for the tonearm.
Norman Rockwell, Lana Del Rey. Such an amazing album
Thank you so much. I was about to spend 100 dollars on the "amazon recommended" player, as that is the only thing amazon was pushing me towards.
Thanks for saving me the headache
You're very welcome!
This is very valuable info. Thank you! I'm about to buy one and start my vinyl collection journey 😊
This is a perfectly fine turntable, and sounds very good indeed; however, you CANNOT upgrade the stylus with any of those others that you showed…the cartridge is an AT-LP3600L, and it will only take - for this turntable - another ATN3600 stylus. I believe that LP Gear sells an eliptical ‘upgrade’ stylus for it, but at this tracking force of 3gms, I wouldn’t recommend it (too sharp for this weight - which is perfectly fine for the supplied spherical/conical stylus).
Other than that, it’s a great turntable, and won’t hurt your records, but will play them well with plenty of detail, and a lovely overall sound presentation.
What about changing the platter may to acrylic or silicone?
I’m interested in starting a beginners set up and this video sold me! Thank you for all the info!!
Every beginner has been sold on the LP60X, and it happens for all the reasons it should. It's minimal fuss, doesn't bog you down, and competes with more expensive turntables in audio quality.
Have you bought it yet? How’s it going?
Glad it was helpful!
@@Stellaaa1989 Me or Ashton? If you mean me, I've had the LP60XBT for coming up to 2 years now. Not a daunting to use turntable at all, very user friendly and sounds great. The Bluetooth version is a massive bonus.
@@31cify can i ask, what speakers do you use with this?
Is the tracking force still okay? I remember a few years ago the lp60 was known for having a low tracking force making it the best budget turn table out there
3.5g
Question: Is this setup good? LP60x > Aiyima T8 6n3 Preamp > Fosi V3 Power Amp > Kanto Yu4 passive speakers.
I'm particularly hexed at the preamp. I don't think the Aiyima T8 6n3 is a phono amp, so how could I connect the turntable to it? Via Phono or Line output? Thanks!
Awesome and quality video!! Thanks for the help 🎉
Funny how this model is now considered a great value at $150 when it was around $100 before the pandemic lol
Thank you for the great review. My AT-LP60 arrived today. I set it up and connected it to my Onkyo TX-NR787 receiver. I tried the built in amp and the one in the receiver. They pretty much sound the same. The sound is very muddy and boomy. The high and middle frequencies are missing and the bass is very boomy. Am I doing something wrong. Should I get an external pre-amp.
I tried different RCA cables and the results are the same. As a last measure, I hooked up the turntable to my Roland R5 and then my Zoom 4N recorders and recorded the sound to these recorders. I then played back from the two digital recorder into the receiver. The quality improved somewhat. So what do you think it is. Do I have a faulty unit or the built-in preamp is not that good. I am surprised that my Onkyo phono pre-amp did not improve the sound at all. Any idea what is going on. I bought this from B&H in New York. They are my photography equipment vendor of choice. They will take the unit back and replace it if it is defective. Any help will be appreciated. Thanks.
Your receiver is kind of high end for this table. I suggest you upgrade to the LT120 series or even LT-140. Both are high fidelity clones of the venerable Technics SL1200 dj tables.
@@bpalpha Thank you for getting back to me and the advice. I am familiar with the SL1200. We had one at our college's TV studio that I used back in the late 80's. For our productions, I was playing licensed music on LP on the SL1200 and recording it to a 1/2" Tascam reel-to-reel recorder. The sound of the SL1200 was fantastic and foolishly I was anticipating a similar sound from the LP60. All the reviews say it is decent but what I have for sound is far from decent. It is outright unacceptable. My wife wanted a turntable and I wanted to go the cheap route not knowing if she will lose interest and I will have wasted my money. As it turns out she loves it and has bought a few records already. She is ok with the sound. I am the one who is being critical. It is outright painful listening to the sound coming from the LP60!
For higher end players I was looking at the LP-120, the Fluance RT 82, RT 83 class players or even higher. I just wanted to get by for 2023 and upgrade next year. I have a 5.1 speaker set up with RSL CG25 speakers and their excellent Sub. CD's in particular and Pandora and Spotify sound fantastic on my speaker/receiver combo.
What to do? I wanted to limit the budget to less than $400. Any other suggestions besides LP120 and LP140? Thanks.
@@boristahmasian9604 There could possibly be an issue with your setup, or your LP60 perhaps. I have a Fluance RT85 running through a preamp to pretty good Klipsch speakers, and it sounds amazing. In another room, I have the LP60 connected to Fluance speakers. I continue to be surprised at how well it holds its own. It's not as good as the Fluance, but in no world would I call the sound "unacceptable", and most reviewers who I'm sure have better ears than I do would say the same. The bad sound quality you're describing I have definitely heard on other budget record players, but not the LP60.
@@Flashback_Funhouse Thank you for your reply. I sent the LP60 back and got a Fluance RT82 and the sound through my Onkyo receiver is still bland. Not wanting to spend a lot more on this new hobby we have picked up I ordered a DJPre-II preamp and got very good sound out of the RT82. The issue is the DJPre has a low buzzing and crackling noise I can't get rid of. I tried different RCA and grounding cables to no avail. Finally I narrowed the problem to the RCA jacks in the back of the DJPre. They are too close to each other and create a terrible crosstalk that does not go away no matter what you try. I tired and sent two of those back that had the same problem. Finally I got a Fosi Box X2 and this one is a solid, quiet unit but sonically it does not sound as good as the DJPre. I may have to go to a Mani2 or iFi Zen for better quality. What are you using for preamp for your RT85?
Thank you for your review, it helped me a lot!
So I think I’m dumb or something but, do you have speaker to plug in? Or does the turntable itself have speaker in it?
You have to have a speaker to plug in
3:57 wait, so i can skip a track and rewind a track with these buttons right? do i have to know where to move it to play a specific track and the lower the stylus from the buttons? how does it work(if it even works like that)?
I LOVE MINE SINCE 2020
in Australia its 286! im buying it today but compared to USA, price is crazy
im new into this type of stuff and im doing this stuff for a sibling, so i have a few questions:
do i need one of those pre amps to connect it to a speaker monitor?
and is this everything i need: speaker, subwoofer, and record player?
and is there anything i should know before i get into this? thanks!
All you need is a set of powered speakers and the turntable! My latest video has three options for some powered speakers !
@@nloop thank you! this is a little tricky, and i don’t wanna blow 500 without knowing if i got something incompatible
@@schaerioute all you need is the turntable and some speakers also the turntable is a lot cheaper on Amazon!
I am torn between the LP60X Versus LP60XBT. So it I get the BT version, I don’t have to use it as if it as Bluetooth version? Does it come with the cables to do do? Great review! Also, it’s for my 24 year daughter, that has never used a TT or vinyl!
for the stylis needle, what upgrade would you recommend?
Hi im new to lp players. you say you don’t need and amp if you use active speakers. Does a bluetooth speaker count as active speaker? So if i put the headphonejack in the bluetooth speaker to the lp player will that work ?
You can only connect it to headphone jack with phono to aux (Granted I haven't tried this)
The best way is to plug it with USB to the bluetooth speakers since most of them have a usb connector
It depends on the type of speaker, but in theory, yes! You would need the right cable setup, and without seeing your BT speaker I'm not sure which cables would work best. The LP60X comes with RCA phono out cables, so you'd either need a new set of cables to go from the BT speaker into the Turntable, or a RCA to aux adapter set of cables.
Great video! This totally sold me on this model. Can you recommend a good pair of wired headphones that are quality but don't necessarily break the bank either? A longer wire would be preferred too. Thanks in advance!
Hi, I'd recommend Sony MDR-7506. They are around $75.00 I love the sound and I bought them based on the reviews I've read. They are wired headphones and the cord is about 4 ft, so it sounds like they'd be good for you. Best, JK
Grado SR80
If I plug this turntable with a Marshall stanmore II is it gonna sound good or bad? Help please
Honestly I have been thinking abt buying a turn table Js didn’t know where to start and this video helped a lot and thx for not taking years over a review (also what speakers would u recommend)
Bought one of these, had to send it back, wouldn’t connect to Bluetooth speakers, tried plugging in speakers still wouldn’t connect. Just got a very quiet sound coming out the record player. Not sure if I set it up wrong or if I got a faulty one. Slightly put off these now though.
is there a difference between this version and the bluetooth one? which one would you prefer?
The only difference is the bluetooth functionality, and I like having that for versatility!
@@nloopBluetooth is stupid. You want vinyl because you want to savour the last drop of sound quality juice. That same spark of vividness that is lost with Bluetooth.If you want to use Bluetooth do it yourself a favor use digital streaming platforms with no high res , just compressed sources. To use Bluetooth from vinyl implies you have to convert analogue to digital with a low cost device like this then compress with Bluetooth and then use usually a headphone which in general has no Audiophile quality. That is ok with low res streaming. But you are dealing with vinyl because you want to appreciate that little difference in quality. Bluetooth, away
If it's automatic, will having no counter weight on it damage your vinyl?
Hey I have a pretty simple question. Lets say I were to buy the Bluetooth model of this turntable. Would I still be able to buy wired speakers and connect them wired to the turntable even if it’s the Bluetooth model? And still get that same good analog sound quality? I’m thinking of buying the Bluetooth model in case I want to connect it to something else, but most of the time just connect it to some wired speakers such as the Edifier R1280T speakers for example.
That will work! It's exactly what I do in the video :)
@@nloop thx! and one more question, what do you think are the best budget speakers for under $200? If it matters, I play allot of hip hop music so I’m trying to find speakers with good bass
Hey! I've made videos on this exact topic, you can check them out on my channel! The R1280T is an excellent option!
@@nloophey again ik I’ve been asking allot of questions but I’m just trying to get the perfect setup for me 😭 anyways would you recommend buying the Audio Technica LP3 over the LP60x being that it is atleast $50 more? Thinking of getting it because of the upgradable cartridge and hoping even with just everything it comes with it sounds better than the lp60x
@@panther_- I unfortunately have not tried the LP3, but to this day still the the LP60X is one of the best starting ones for the money. If you buy on amazon or at best buy you could always return products that don't quite work for you!
I have an Audio-Technica AT-LP60X turntable hooked up to my Sony STR-DN1080 receiver to the CD input, since this receiver doesn't have a photo input, and the turntable set to line. Using this setup my subwoofer keeps cutting out. Is this because of the turntable built in preamp not being the best? Do I need to buy an external preamp to solve this issue?
Do I need an amp or receiver for better quality music if I am only listening to music via the headphones provided?
Can I just use an AUX cable into a speaker?
Hi! Does it need an external phono preamp? Indeed it has one inside but some say it’s not very good
Can I just plug in a normal AUX or do I have to use the kind included in the shipping?
Does the turntable have a built in speaker? or do you NEED external speakers?
I don't know if you know but you need some speakers.
Hi just want to ask if the needle is need to change every 50 hours of play time just like the other vinyl
What do you think about the lenco lbt-188 in this price range, is it a good choice over the At-LP60x?
Looking to get a new speaker for this turntable! Just wondering if there will be a big difference if I connect the turntable by bluetooth instead of analog?
Worried about the rubber belt turn table as I heard they can get off sync. Was wondering if this one was good?
Hello, I have the version of this one but not with Bluetooth included. Can you help me with the setup, do I need some speakers ? an amp ? or this is the same as the one presented in the video ?
Exactly the same setup.
Any issues with it not having an anti-skid?
Great video! I learned so much and have decided to invest in this turntable. I have a question though for speakers. I’m not too familiar with the plug in situation, but would the Micca MB42-C center channel speaker work with this turntable? I’m not ready to spend $139 on the other Micca speakers when I’m not sure how to use them.
Hi, beautiful review...
Can i use Bluetooth for streaming music from my phone?
what.
How much is the tracking force for this one? I got one but I’m not sure if it’s got the correct tracking force
It tracks at 3.5 grams. Which is good because the ATN 3600L cartridge is rated to track at that weight in order to work properly
"the logos are everywhere" there's only three... two on removable pieces to ensure you're getting authentic equipment when replacing them, and another on the main unit itself.
Can you record into a DAW with this?
No the USB model does come with a cable to use a laptop with it and use audacity to record the songs
are you able to use an aux cord to connect the turntable to speakers?
Do you need speakers or does it come with built in Bluetooth speakers
Im not sure but if u find out can u let me know?
Is the quality still good with the line instead of the phone switch ?
Works great right out of the box, but you will definitely hear improvements if you decide to opt for a phono stage later on.
Thanks for this video but i dont understand some stuff. where do i get rca cable and how do i find rca speakers in the shops near me. all they have is AUX speakers.
Is this a good replacement for the technics SDL202?
Does this have a 3.5mm jack and what’s the fidelity if I use headphones - thanks !
Hi! On the back, it It does on the back, and the fidelity should be just as good as hooking it up to speakers, as long as the headphones are great!
Just note that there's no volume control on the turntable itself, so you may want to invest in a phono-amp instead so you can control the volume.
Could I connect my phone to this via blutooth and have it play though the speakers connected to it?
Unfortunately, i don’t think so. You’d want to connect your phone to the speakers directly
well done review !
Fantastic! Thank you!!
how does this compare to something like the pro-ject T1 Phono SB.
I am planning to get a pair of the Klipsch R-51PM. But no amp at this stage.
STOP it was the green NFR vinyl for me 😭
Can anyone tell me how I can turn up the volume :,) it was so hard to figure out and it’s so quiet
It will depend on what speakers you have hooked up to the record player. The record player itself does not have any speakers!
Do you need a speaker to go with record player?
Yep!
do they sell speakers too?
I want some that match the thingy
So i dont need a amplifier? Just an active speaker?
Correct!
Can I use speakers for this record player and which type because I am really confused and don’t know if the cable will work?
You will need speakers as there are none built in. If you don't want to buy an amplifier or a receiver, then select powered speakers, which can be plugged directly into the turntable. There are many reasonably-priced options out there. NLoop explains how to connect them in the video.
Yes, you can! In the video I explain the types of speakers that will work. But if you go in my channel, all the speaker reviews I have up right now will work perfectly with this turntable!
And what we doing if we want play from the middle of the record for example, I want to play a third song from the record😒
You have to manually lift up the needle and set it down on the record area in which that track starts. Use the up and down buttons, do not use your hands to lower it. Tracks are indicated by a thicker groove on the vinyl itself.
This will be the same on any turntable out there
Reccomendations for a reciever to pair with lp60x???
I just bought mine today and followed it step by step but it’s just not working, I’m freaking out, so can anyone help?
hello clyde, great video!
Hey! I have this record player but I’m still searching for speakers.. my price range is between 1 & 150 I’d say. Thank u.
Check out my video on the best speakers for vinyl records! There's some good options for you in there!
@@nloop thanks !
Nice review.
Question: Could I just plug some headphones in the back and listen direct?
Where did you find the dark green NFR record?
It’s actually still black, but the room lighting makes it look dark green. Dark green would be sick though.
Can you play it without a speaker??
In the most replies, it's said that this doesn't have built-in speaker
No
I have a Sonos play 1 speaker, is it possible to set this turntable up with that speaker?
The sound is law than the sound of cd player is it because it’s need ground cable?
Hi i have a question! I have a denon avr x2200w and it doesn't have phono inputs. Can i use line on the Audio Technica and plug it into a RCA input on the Denon? Would that work or do i need a phono box?
The lp60x has a switch between line out and phono. If you choose line out you are using the phono preamp inside the turntable and so you can connect it to an amplifier or receiver. If you choose phone you MUST connect to a phono preamp or a receiver that has phono amp section. I tried it to an amp and the sound is thin with too highs and no lows that’s because de phono preamp is an amp with an equalization that increases bass and decrease highs. If your receiver lacks phono input you MUST choose line out … or buy a dedicated phono preamp.
The reason of adding an external preamp is that one can assume that the internal phono preamp is not of the best quality but it is difficult to say, it depends on the overall quality of your setup. If you want just it yo sound ok you DON’T NEED an external phono preamp if you choose line out
I suppose with line out option that it should work fine with your receiver
👍
great video thanks for sharing
Thanks for watching!
Please, is the analog out a 3.5 mm one?
Yes!
Thanks
Anyone who has this is it possible to go from aux to aux want to go from player to soundbar
i've had one of these since february (non-bt version) and it's served me quite well.
3:51
Hey i just realized, I also have that vinyl too! "good kid, m.A.A.d city" does slap on vinyl, not gonna lie Kendrick won the beef, Drake lost.
does the system has a builted in speaker?
Hey! No it does not. In the video I talk a bit about the options you have for speakers, but I also have a video on my channel about the top 3 best speakers for vinyl records!
There are loads of audio- a lot to the aftermarket it's there for Reason as a quality reassurance
How to make the grounding cable
can a alexa work as a speaker for this turntable?
I don’t think so.
I would never propose a turntable with an arm like that. It's okay to save money, but not too much.
There are no roegolations that allow you to change cartridge, when you want to improve the turntable.
Reloop RT-3 USB costs only $ 60 more and already it realizes that it is higher; Then if you go to see the technical characteristics Wow and Flutter and Rumble is confirmed.
I need help. My needle is not coming down 😢
Good review
is it worth it to pay 100 more (289 to 389) for the Bluetooth version? do u ever really use the BT?
Short answer is no, I don’t think it’s worth it since I rarely use it. But some people may wanna use it all the time.
I’m confused where you’re purchasing it from since it shouldn’t be that much more expensive! Check out the links in the video description as those have better retail pricing than what you listed.
@@nloop im Australian, so those numbers i put are the base costs of them over here, but i have found the non BT version on sale for 239 and the BT version on sale for 310 so a $70 gap. (The sony one for comparison is 295 here)
also there is a lp60x usb version available too.
@@blaynesea8816 Goootcha. I'll be honest and say that I don't think Bluetooth is at all necessary as I never use it and you lose some of that feeling of pure analog audio... which is kind of the point of listening on record. It's a convenient but ultimately unnecessary feature for me personally.
Can you do a review on the new LP70X?
How do we adjust the volume? If using headphones
Amps
@@Papabandana do you know if i could plug a 3.5mm cable into the back of the player and then into a speaker system with a 3.5mm line in port?
Bro,possible to mix some house music on that?
You lost me at your complaint about the Audio Technica logo being on the cartridge.