Bruh I literally took out the drivers glove box in 5min then struggled getting my average sized hands around the harness, this video made my repair 1000 times easier. Thank you
Hi sorry still having problems with mine when I press it the light doesn't stay on flashes when I press it off should the light be on when I put handbrake on then go off when I release cheers
So why do you assume that when the light is not on that means the switch/light is faulty? Could it be that the electric park brake motor actuator is not applying properly or a sensor is not detecting that it is applied therefore the cars contol unit is not turning on power to the light?
no.. the switch you take out has a serial number on it just get the same one and pop it in it will work with out a problem. just dont get 3rd party ones get original from ebay will cost a bit more will last way longer than 3rd party ones.
Merhaba bızde de b6 passat var el frenı problemı var eger unutup el frenı dugmesıne basarsak el frenı dugmesı ısıgı yanıp yanıp suruyor mekanızma sesı gelıyor ancak el frenı devreden cıkmıyor ancak arabayı bır kac defa acıp kapatıp frene saglam basıp bır kac denemeden sonra kendını bırakıyor . B6 passatta sureklı ust uste hatalar cıkmaya basladı bızde bagaj kılıdı ıle basladı yazları calısıp kısları kapanmoıyor daha sonra coolant ıcınde suyu antrfreezi hersey tam olmasına ragmen stop check coolant uyarısı ve kafasına gore yanıp sonen far ıle ıyıce bıktırdı bızı artık satmaya calısıyoruz
when the parking brake is applied should the light on the switch stay lit up when the ignition is on or should it turn off? or does the light only come on when you press the switch to release the parking brake?
ozer han okay, so my light is only briefly coming on for a split second when i switch parking brake off and it only does it once on a running engine. Does this signify a faulty switch to you?
My roommate is having troubles with her 2006 VW Passat. Her parking break is flashing and it keep beeping when she drives. She bought a 3rd party switch and it still has the same problem. Do anybody know that if we purchase the actual "VW replacement" if it will fix the problem? Thanks in advance.
remover the tires, and then remove the motor from the caliper. rewine the socket back of the caliper and you should be good. I am thinking about just separating the two. I can't risk it happening again. some times its the stwich some times its the motor. just rewine the torx socket (t40-35) and it should be fine
@@Louisjp1875 remover the tires, and then remove the motor from the caliper. rewine the socket back of the caliper and you should be good. I am thinking about just separating the two. I can't risk it happening again. some times its the stwich some times its the motor. just rewine the torx socket (t40-35) and it should be fine
Uschi Mueller-Cajar if the button sticks you can take it out. Open it up and give it a clean. It is a bit hard to take it apart but it is possible. If it still sticks then your best and easy option is to replace it.
Uschi Mueller-Cajar open the side and get a flat head screwdriwer and pust the metal clips that are holding it in place on top and botom. And it should come out.
I've heard u have to take it to a garage and have it out on a machine to access the code or any new switch won't work because the car don't recognise the switch and the calliper won't work ????? Does anyone know if this is true????
My Passt 2007 have the same problem but the difference is mine not work, the handbrake not engage when I press P button Now, i alway have to move the stick away from neutral when parking on hill
@@ozerperi do you know how much is it cost ? I have that problem after driving on a road made by stone (this old bad kind of road usually from 18-19 century in Europe). It make my car was like a vibrator, i think it is the reason causing the fault
If anyone actually try to find out why is not working, I can't tell i split my in parts and there is a small plastic with 4 pins and one of them is smaller then others. This is the main reason.
Bruh I literally took out the drivers glove box in 5min then struggled getting my average sized hands around the harness, this video made my repair 1000 times easier. Thank you
Your welcome mate.
changed successfully in 5 min with your help. thanks
just switched the switch to a new one and work perfectly fine.
ozer han
no! puoi sostituire 100 swicth del freno e si guasterebbe lo stesso.
usare l'auto hold e risolto il problema, freno completamente automatico.
Merhaba, benim passat freni çalışmıyor ve çizili P ışığı yanıyor, düğme den olabilir mi?
mine is the same ordered a new one people say its a fuse or a air leak in the seal on the eltro breaks ?how did yours go?
Uh my car have those lights on and is not moving if i change the button it will fix it??
Do you here sound when you press the button
Does light have to be on all the time or only when you press it
Only when you press it
Hi sorry still having problems with mine when I press it the light doesn't stay on flashes when I press it off should the light be on when I put handbrake on then go off when I release cheers
I just changed it in my passat.. but the yellow lamp is still bliking..
can be caliper motor read the codes,
So why do you assume that when the light is not on that means the switch/light is faulty? Could it be that the electric park brake motor actuator is not applying properly or a sensor is not detecting that it is applied therefore the cars contol unit is not turning on power to the light?
Scott Nunan in my case it was the light when i opened the switch up there is a flexible cable inside that goes to the lights and the cable was broken.
no.. the switch you take out has a serial number on it just get the same one and pop it in it will work with out a problem. just dont get 3rd party ones get original from ebay will cost a bit more will last way longer than 3rd party ones.
So the new one was faulty too?
Yes it was a cheap offbrand from ebay
Merhaba bızde de b6 passat var el frenı problemı var eger unutup el frenı dugmesıne basarsak el frenı dugmesı ısıgı yanıp yanıp suruyor mekanızma sesı gelıyor ancak el frenı devreden cıkmıyor ancak arabayı bır kac defa acıp kapatıp frene saglam basıp bır kac denemeden sonra kendını bırakıyor . B6 passatta sureklı ust uste hatalar cıkmaya basladı bızde bagaj kılıdı ıle basladı yazları calısıp kısları kapanmoıyor daha sonra coolant ıcınde suyu antrfreezi hersey tam olmasına ragmen stop check coolant uyarısı ve kafasına gore yanıp sonen far ıle ıyıce bıktırdı bızı artık satmaya calısıyoruz
Duzgun calistiklarinda guzel rahat arabalar ama sorun cikartinca cok bas agritiyorlar.
ozer han arza da kolay kolay yapmıyolar b6 kasa sorunuz kasa Bence,B7 lerde cok dsg sorunu var Alacaksan 2009 2.0 tdi alacan Dsg sorunsuz binersin
Bendede bugün başladı el freni ışığı yanıp sönüyor 20 saniye falan dişli siyiriyomus gibi ötüyor el freni bırakmıyor sorun neden olabilir
Yes bro it works. 👍
when the parking brake is applied should the light on the switch stay lit up when the ignition is on or should it turn off? or does the light only come on when you press the switch to release the parking brake?
Ross Ayling when the break is on the light is on when the brake is off the light is off.
ozer han okay, so my light is only briefly coming on for a split second when i switch parking brake off and it only does it once on a running engine. Does this signify a faulty switch to you?
Ross Ayling in my case the light never came on when the warning came on so your one mite be a different problem.
My roommate is having troubles with her 2006 VW Passat. Her parking break is flashing and it keep beeping when she drives. She bought a 3rd party switch and it still has the same problem. Do anybody know that if we purchase the actual "VW replacement" if it will fix the problem? Thanks in advance.
Evan Fezatt did this problem get solved and if so what was the problem?
remover the tires, and then remove the motor from the caliper. rewine the socket back of the caliper and you should be good. I am thinking about just separating the two. I can't risk it happening again. some times its the stwich some times its the motor. just rewine the torx socket (t40-35) and it should be fine
@@Louisjp1875 remover the tires, and then remove the motor from the caliper. rewine the socket back of the caliper and you should be good. I am thinking about just separating the two. I can't risk it happening again. some times its the stwich some times its the motor. just rewine the torx socket (t40-35) and it should be fine
My passat v6 4motion fsi 2007 model developed the electric hand brake problem and I don't where to get it, can someone help.
Ebay.
My light only comes on when hand break Is applied
brilliant thanks good info
Mine button flashes on and off when I start the car. But it wont release. So the car wont move. Does anyone know how to fix this ?
It could be your calibration motor
One of the rear brake Caliper motors is faulty
Just check for damages /cracks on bottom of the casings
What is the part called? Thanks!
I think its called parking break switch. Its got numbers on the side too.
What can I do when the button sticks and does not come out ?? Please help me
Uschi Mueller-Cajar if the button sticks you can take it out. Open it up and give it a clean. It is a bit hard to take it apart but it is possible. If it still sticks then your best and easy option is to replace it.
Thank you ,but that is my problem ,It is not coming out .I mean the button .I push and push .It is not popping out
Uschi Mueller-Cajar do you mean from the location or the cable?
From the location
Uschi Mueller-Cajar open the side and get a flat head screwdriwer and pust the metal clips that are holding it in place on top and botom. And it should come out.
I've heard u have to take it to a garage and have it out on a machine to access the code or any new switch won't work because the car don't recognise the switch and the calliper won't work ????? Does anyone know if this is true????
My Passt 2007 have the same problem but the difference is mine not work, the handbrake not engage when I press P button
Now, i alway have to move the stick away from neutral when parking on hill
You mite need the motor changed in your breaks
@@ozerperi do you know how much is it cost ?
I have that problem after driving on a road made by stone (this old bad kind of road usually from 18-19 century in Europe). It make my car was like a vibrator, i think it is the reason causing the fault
@@truongnguyenxuan7411 depends on where you are and if you want new or second hand.
Ok ya mine works then cheers
Designed to go wrong 💰💰💰💰💰
Agree 100
Türkçe paylassaydin Türklere yardımcı olsaydın sonra yabancıları dusunurduk
ebay not eray
If anyone actually try to find out why is not working, I can't tell i split my in parts and there is a small plastic with 4 pins and one of them is smaller then others. This is the main reason.
The ribbon cable inside is not making connection.
@@ozerperi in mine was plastic pins
👍
amzn.to/3Z84xSW
Bullshit.
usare l'auto hold...
lo swicth si romperà sempre!
Agatino Signati per me cambiare l'interruttore funzionato. So che alcune persone con la stessa risposta che hai dato erano tutti soddisfatti lì idea
ozer han
🖒Giusto, ma a me ha sempre dato problemi perciò non lo utilizzo più...