Best ssx-303 review video so far! I got mine in last week...impressed for the most part. New to green gas....now I may need to research this HPA stuff you referenced!!!
I got my ssx 303 a while ago. I love it. I played in like 30 degree weather with green gas and .32 gram bbs, and it performed like a champ. Would degree recommend getting the novritsch Red gas, the gun also performs WAY better with heavier bbs
little life hack for your mags to help with the temperature issue. Keep the mags in a large holder so its got some room and then stick a pocket warmer or two in there as well. They don't get hot enough to cause a rupture from the gas but will keep them in a warmer environment until ready for use.
You can also get lower pressure gas which should do the same thing. But I’m not sure if it effects how many shots you can get without having to refill gas.
Awesome video again 👍. Are you gonna fit a crazy jet barrel on the ssx303 or ssg10 for accuracy and power comparison like what you did to the ssx23? It will be great to see if the the carry jet barrel make a difference comoare to the 6.01 tight bore barrel
They state it has a ml crazy jet 6.02 if I did change I would go 6.00 but with it shooting straight and putting out up to 3j on green gas I am not going to change it just yet I played it 2days ago it was extremely fun
Hi ! I got a question.. If i change the flat part like you on the hop-up (H-ARM), should i change the join as well ? Or cut the bead inside the join ? Thanks for this good Review !
I just placed mine in there and reassembled it seem to work very nice compared to the stock one but I will say one thing. If your shoots straight and is good don’t mess with it at all I am always testing things so buy nature I take everything apart 😂
i like the accuracy that you showed, but i am just curious if i can make it m4 adapters. i did that to my glock 17 , and put a hose cable into a green gas with threaded regulators (ET-1000, puff dino threaded mouthcap). Never experience with mk23 mags, is that possible?
Funny. I got the Novritsch LPVO and it doesn’t have that. Did it come with the RMR? Looking around now to see if there is a mount to put a pic rail on a scope tube ring. Thanks.
ty for the video, just subbed.. I have question, in my country we can have max 2.5 jules for DMR, so this dmr is pretty useless to me? or there is way that this gun can shot 2.5jul with 0,46 ? if this is not possible then for me is better to just run with m4 1.5jules with scope...
So on gas temperature is key but really hpa is the only way for consistency it is very affective on hpa however I have not tested it at any pressure over 100psi
Ya man I think there pretty good mabye a couple 2-3 tweeks and probably the best thing novritsch has released to date !! 👊 meaning there getting better and more creative
I like the ssx303. Mine can shot a match in the distance of 6 meters on first try. On hight distances it works also great. Unfortunately there are som feeding issues. Maby 2 times in a mag it feeds not properly and you have to edject and inject the Mag again. The hopup adjustment wheel is a little bit difficult to move. But I like the Quality of the materials used. I've never had a spuressed airsoft gun before so I can't realy say something about the sound. I think for 269 Euro/Dollar is it a great gun.
Check the height of the gas router lips if the look high that will cause feeding issues sometimes the won’t seat all the way down in the bottom and push itself up to much I have found this to be the case with the ssx23 in the past I sign of this is you shoot 1 it works then won’t shoot you remove the mag and reinsert it and it shoots one then won’t shoot again
Man that trigger box is noisy...need the trigger box mods..would also be nice if the magazine were a bit longer so you could hold me than 25 rounds..stick a 50 degree MR HOP rubber in it..and a crazy jet barrel. I'd also replace that dust cover or machine it to take a dual screw design..novristch was also promising c02 mags for the ssx23 at one point...still waiting..
Hey, new to the channel, do you know what type of CQB Russian HPA Mag Adapter we should use for this Mag? I'm really interested in getting this gun and doing this. thank you.
@@Sandmanthesniper ok, I saw a video that talks about how to make a green gas gun into a HPA, so I wasn’t sure if you had tried to do that. Thanks for your time.
@@Sandmanthesniper hey, found something cool. There is a hpa mag that u can get for the ssx23/MK23 on primary airsoft. It’s $135 for a 110 round mag if you’re interested. Just thought it was cool, and wanted to let you know if you wanted to upgrade it.
Most likely true as it is aluminum! And not plastic I am just glad that is was still in there as my first ssp1 that I waited for was not and it was also opened
I am still waiting for them to ship the new stuff I ordered lol I should hit them up and see what’s going on. As for the barrel and bucking its in an ssx23 inside an otar carbine kit right now
@@Sandmanthesniperthis gun does shoot to the left a lot out of the box; sometimes the holdup chamber needs to be rebalanced a little did you ever do that?
you got the spirit of an airsofter. bare honest thx 4 not being just another influencer. i really really appreciate that. stay safe m8
Best ssx-303 review video so far! I got mine in last week...impressed for the most part. New to green gas....now I may need to research this HPA stuff you referenced!!!
I got my ssx 303 a while ago. I love it. I played in like 30 degree weather with green gas and .32 gram bbs, and it performed like a champ. Would degree recommend getting the novritsch Red gas, the gun also performs WAY better with heavier bbs
little life hack for your mags to help with the temperature issue. Keep the mags in a large holder so its got some room and then stick a pocket warmer or two in there as well. They don't get hot enough to cause a rupture from the gas but will keep them in a warmer environment until ready for use.
thanks for this review man. exactly what i wanted to see.
just started watching your Videos and you do an awsome Job!
Thanks 🙏🏻
Yeah I couldn’t use this on my field, it was shooting at 3.2 joules. Ordered some more nozzles hopefully get it lowered
The fps is adjustable
You can also get lower pressure gas which should do the same thing. But I’m not sure if it effects how many shots you can get without having to refill gas.
Wow mine barely goes over 1j on red gas !!
Nice review, thx for the work!
Awesome video again 👍. Are you gonna fit a crazy jet barrel on the ssx303 or ssg10 for accuracy and power comparison like what you did to the ssx23? It will be great to see if the the carry jet barrel make a difference comoare to the 6.01 tight bore barrel
They state it has a ml crazy jet 6.02 if I did change I would go 6.00 but with it shooting straight and putting out up to 3j on green gas I am not going to change it just yet I played it 2days ago it was extremely fun
Awesome!
Hi ! I got a question.. If i change the flat part like you on the hop-up (H-ARM), should i change the join as well ? Or cut the bead inside the join ?
Thanks for this good Review !
I just placed mine in there and reassembled it seem to work very nice compared to the stock one but I will say one thing. If your shoots straight and is good don’t mess with it at all I am always testing things so buy nature I take everything apart 😂
i like the accuracy that you showed, but i am just curious if i can make it m4 adapters. i did that to my glock 17 , and put a hose cable into a green gas with threaded regulators (ET-1000, puff dino threaded mouthcap). Never experience with mk23 mags, is that possible?
I have heard if people tapping the mags but I have never done it with ssx/mk23 mags
Thanks for the review! What did you use to mount the RMR to the LPVO?
The mount that it comes with from nov
Funny. I got the Novritsch LPVO and it doesn’t have that. Did it come with the RMR? Looking around now to see if there is a mount to put a pic rail on a scope tube ring. Thanks.
Omg. I’m an idiot. It does have that rail already on it. Lol
HPA all the way!!! Haven't received mine yet. Do you HPA tap the mags? what adaptor is required? thanks for the review.
I use primary airsoft mk23/ssx23 adaptor to mp5 mags
ty for the video, just subbed.. I have question, in my country we can have max 2.5 jules for DMR, so this dmr is pretty useless to me? or there is way that this gun can shot 2.5jul with 0,46 ? if this is not possible then for me is better to just run with m4 1.5jules with scope...
So on gas temperature is key but really hpa is the only way for consistency it is very affective on hpa however I have not tested it at any pressure over 100psi
Got mine today and I am very pleased with it.
Ya man I think there pretty good mabye a couple 2-3 tweeks and probably the best thing novritsch has released to date !! 👊 meaning there getting better and more creative
@@Sandmanthesniper one thing I noticed with mine was the safety was super stiff. I had to channel my inner weight lifter to enable it.
Subbed. Excellent content.
There is a modification inside the hammer strike stronger To deliver more gas for all the other stuff it is an ssx23
How is this done as mine is seriously lacking
Thanks for the mention :)
For sure !! Thanks for watching!
Love it!
Whats the best temperature for shooting gas guns like that, and very least you would want to shoot at.
I usually run into problems when it’s below 50 degrees green gas starts sucking
@Shigu 357 about like 45 degrees or so.
I just run HPA on those days lol
I like the ssx303. Mine can shot a match in the distance of 6 meters on first try. On hight distances it works also great. Unfortunately there are som feeding issues. Maby 2 times in a mag it feeds not properly and you have to edject and inject the Mag again. The hopup adjustment wheel is a little bit difficult to move. But I like the Quality of the materials used. I've never had a spuressed airsoft gun before so I can't realy say something about the sound.
I think for 269 Euro/Dollar is it a great gun.
im having the same problem with the feed tho mine is alot worse. 5-6 shot per mag that feed no bb. have you got a fix ?:P
Check the height of the gas router lips if the look high that will cause feeding issues sometimes the won’t seat all the way down in the bottom and push itself up to much I have found this to be the case with the ssx23 in the past I sign of this is you shoot 1 it works then won’t shoot you remove the mag and reinsert it and it shoots one then won’t shoot again
@@Sandmanthesniper ill try That :) new to the platform. It’s the rubber on top of the mag right ?
Allso no missfeeds with same mags in my TM mk23
You can also put a bit of lube on the top seal on the mag or file down the nozzle feed ramp that goes on top of that
Man that trigger box is noisy...need the trigger box mods..would also be nice if the magazine were a bit longer so you could hold me than 25 rounds..stick a 50 degree MR HOP rubber in it..and a crazy jet barrel. I'd also replace that dust cover or machine it to take a dual screw design..novristch was also promising c02 mags for the ssx23 at one point...still waiting..
Ya I think it’s worse with the sound bouncing around in the outer aluminum cavity but I have a couple idea for it
@@Sandmanthesniper couldn't really tell how was shot sound? Quiet?
@@ghostwalkerairsofttech1947 trigger box IS noisy, but beyond 30 ft. U can't hear much of anything.
Plus, the noise level coming from my 303 is Unacceptable without a Suppressor.. With No Suppressor on , IT'S LOUD.
@@ghostwalkerairsofttech1947 it about the same at distance as the ssx23. It definitely can be quieter with some diy mods
Hey, new to the channel, do you know what type of CQB Russian HPA Mag Adapter we should use for this Mag? I'm really interested in getting this gun and doing this. thank you.
I am not sure there is one for the ssx 23 mag but thanks for joining the channel 👊
@@Sandmanthesniper ok, I saw a video that talks about how to make a green gas gun into a HPA, so I wasn’t sure if you had tried to do that.
Thanks for your time.
@@Sandmanthesniper hey, found something cool. There is a hpa mag that u can get for the ssx23/MK23 on primary airsoft. It’s $135 for a 110 round mag if you’re interested. Just thought it was cool, and wanted to let you know if you wanted to upgrade it.
@@jordanleighty5949 yes I do own and use it is excellent! I did not cover that in my review as it was long enough 😂
@@Sandmanthesniper lol I get it, but I’m great you have used it and think it’s great, look forward buying it.
Great video 👍
i think nov should put hex bolt and provide a wrench
Where is the novritsch dealer shop in Southern CA?
Military Supplies & Equipment
(760) 242-1313
goo.gl/maps/8tX6Y25wAXnk175CA
I will also say that this is my personal favorite shop in ca at the moment as the people and tech work can’t be better!
Should I buy this or the base pistol?
Tridos will be releasing a cool kit soon for the ssx23. I am not sure how long the wait is for the next batch of 303 but that’s up to you !!
The box was open because the profile under a scan looks like an sbr and whoever delivered it may have opened to verify it was an airsoft rifle
Most likely true as it is aluminum! And not plastic I am just glad that is was still in there as my first ssp1 that I waited for was not and it was also opened
Good review..
Hey bro whats the barrel lenght and diameter?
303mm 6.01 inner
Will you show how to how this rig.
? What part are you speaking of dissembling it?
Autocorrected hpa to how. Lol. Question was meant to be can you show us how to hpa rig this gun
I get pocket warmers from Walmart and keep them in my pouches
#IILSTRONG!
kinda off-putting its not a stand alone carbine kit and they dindt extend the inner barrel to the end out of the box.
What ever became of your Airsoft Philosopher stuff?
I am still waiting for them to ship the new stuff I ordered lol I should hit them up and see what’s going on. As for the barrel and bucking its in an ssx23 inside an otar carbine kit right now
@@Sandmanthesniper I think I'm gonna sell my stuff lol, even with the wide chamber and an R-hop I can't make it work
@@SiliconeSword they said there is a new bucking but I haven’t got my hands on it yet
@@Sandmanthesniper I have the new bucking in my VSR. Definately better. No more over hopping issues and straight shots!
The bb's goes to the left!
Yes I was shooting in the wind but they do normally go straight
@@Sandmanthesniper Thank you! I said because my ssx23 shoot the bb's switched to the left
@@danielocrecepelo oh !! Got it
I use an ssx23 and it also seems to pull to the left, even without wind.
@@Sandmanthesniperthis gun does shoot to the left a lot out of the box; sometimes the holdup chamber needs to be rebalanced a little did you ever do that?
Comment
Its not a kit
👍🏽
Awesome!