Good job, I'm working on a 15 hp gamefisher. Everything looks brand new on yours I assume u replaced both points and both condensers as well as the coils. Do u happen to have any links I have to do the same thing.
Do you think those coils would work with the original ignition system. I just bought this motor and have no idea what I’m doing. I’ve got it taken down. Blue coils bad
it will not work, I did the same thing but the blue coils are actually bim coils and they are different. switch to a points and condenser system, it will save you time and money.
great video, I'm needing some breaker points for my Sea King 9.2 which looks similar to what your showing (hard to find.) do you by chance know the # for the points? thanks again.
I'm not sure what I used to gap the points and condensers. I did find a video on UA-cam showing how to put the coil system together and how to gap them correctly. video is called "JOHNSON / EVINRUDE FLYWHEEL REMOVAL AND POINTS GAP INSPECTION"
I have an 1980 Sea King 15 needing a coil. Any idea if the OEM Evinrude part will come off that fork and fit on my engine? I’m not trying to spend $80+ on this motor. Or do I have to go aftermarket Evinrude parts?
About to clean the points and replace the condensers on a game fisher 15 1988. Is it worth replacing the coils while I got it open? This thing never really ran.
If it never really ran, then the coils should be fine. I’ve been having ignition issues on my 1980 Sea king 15, but that’s likely from heavy use and then sitting for almost 30 years
I’m working on the exact same game fisher, it fires up no problem but when put into gear it Immediately shuts off, carb was just rebuilt, any thoughts?
I just put CDI ignition on mine. Works great. Both of my BIM coils were shot and I had no fire at all.
I want to do the same thing to my force 9.9, where did you buy the cdi system at?
You did a good job with this. Love to see a video of this running
Part no. For replacement coils PLEASE? WHAT DO I ORDER?
Do the points and condensers bolt to the same ignition plate as the bim coil set ups
yes on Chrysler motors around 7.5hp to 15hp
Good job, I'm working on a 15 hp gamefisher. Everything looks brand new on yours I assume u replaced both points and both condensers as well as the coils. Do u happen to have any links I have to do the same thing.
I got the coils on amazon and the condensers on wholesalemarine.
I’m doing the same thing now. Parts are so hard to find
Do you think those coils would work with the original ignition system. I just bought this motor and have no idea what I’m doing. I’ve got it taken down. Blue coils bad
it will not work, I did the same thing but the blue coils are actually bim coils and they are different. switch to a points and condenser system, it will save you time and money.
What is the part number of the replacement coils?
I put old weed eater coils in my 1990 15hp gamefisher
great video, I'm needing some breaker points for my Sea King 9.2 which looks similar to what your showing (hard to find.) do you by chance know the # for the points? thanks again.
I'm not sure what I used to gap the points and condensers. I did find a video on UA-cam showing how to put the coil system together and how to gap them correctly. video is called "JOHNSON / EVINRUDE FLYWHEEL REMOVAL AND POINTS GAP INSPECTION"
Google Franz Marine in Missouri. He has Chrysler parts.
I have some good used Chrysler points and condensers. I also have other good used Chrysler parts.
Would any mag plate fit on this engine ?
no
I have a few used mag plates for Chrysler. I work on many of the smaller Chrysler motors. Get with me if you still need help
I have good used coils, points and condensers for Chrysler
I have an 1980 Sea King 15 needing a coil. Any idea if the OEM Evinrude part will come off that fork and fit on my engine? I’m not trying to spend $80+ on this motor. Or do I have to go aftermarket Evinrude parts?
About to clean the points and replace the condensers on a game fisher 15 1988. Is it worth replacing the coils while I got it open? This thing never really ran.
If it never really ran, then the coils should be fine. I’ve been having ignition issues on my 1980 Sea king 15, but that’s likely from heavy use and then sitting for almost 30 years
Do you happen to have a model number or link to the Johnson coils you used?
2 PCS Replace 582995 584477 580416 18-5181D Igintion Coil Compatible with 1970-1990 OMC Johnson Evinrude Outboard 1.5HP-40HP This is from amazon
I’m working on the exact same game fisher, it fires up no problem but when put into gear it Immediately shuts off, carb was just rebuilt, any thoughts?