Honda CX500 Valve Adjustment

Tools you need:
17mm socket
10mm socket
Torque wrench
.003 and .004 feeler gauge
Timing template for removed pickups
www.rae-san.co...

[@lars1480]

Thanks this was perfect I remember that with The indikator Marks from back in 1981 when I did this - I Saw another video where The guy didn’t even had The bolt removed to see The Marks and I thought this is going wrong - so thanks fore confirm i was right 😊

[@denturemaster]

Very good instruction

[@jeffkinder4995]

Thank you!

[@finnkowal2322]

Paint job looks really good. Did you do a video series on it?

[@jeffkinder4995]

Thank you! I just cleaned really well with degreasers, then used wax remover solvent before spraying with light coats of Duplicolor engine enamel

[@corecutty]

Perfect thanks

[@GG-ub4ej]

This video is extremely helpful. Thank you for your time and efforts in doing this project and sharing it for others to learn.

[@roberttatro577]

Set the headbolt torque on the 4 rocker arm bolts before adjusting valves. Prevents head gaskets blowing out.

[@jeffkinder4995]

Excellent tip!

[@charlesfitton9677]

set one valve at a time...

[@matija13579]

Good stuff!

[@MOTORCYCLEMIKEANDBREE]

How do you rotate the motor

[@jeffkinder4995]

17mm socket on the crank bolt accessed though front cover. Cover has a 17mm head too. Rotate clockwise from front engine.

[@haneymoto]

Great video Jeff.

[@jeffkinder4995]

Thank you 😁

[@tonyfurneaux3399]

Hi Jeff, sure you know what you are doing, but just a bit slow explaining stuff Sir, good luck.😆

[@ronreiff3991]

O.m.g. can't stand to watch a noob try and teach something...😂

[@jeffkinder4995]

Then don’t. Many people have found this helpful. If UA-cam was all professional bike builders it wouldn’t be UA-cam. Do you own video if you are a professional. We will all watch it.

[@skyblockjake]

@@jeffkinder4995couldn’t have said it better myself.