Perfect. Used this tutorial as startup configuration to switch internal caps to internal traffic and guest caps to external traffic, with capsman and 2 SSIDs
I used the configuration as taught here and all is working fine, but I have an issue; when in LAN1 i can ping the gateway but i can't ping other clients in LAN1, please can you help?
hi, where did you get the routing mark - "WAN1-LAN1" and "WAN2-LAN2"... configuration not shown on the video... can you show the details for that routing mark...
hi! sorry but in the minute 8:00 onwards, he select en routing mark "WAN1-LAN1" but that was not the one he configured before !! somebody can i explain!
Thanks for this tutorial, it works but I have 2 problems : 1. hosts on LAN1 cannot reach hosts on LAN2 2. cannot ping public IP of WAN1 and WAN2 How can I do to resolve those problems ?
nice way ok ... me i have 2 wan and 1lan , and i want to separate users some of them use wan1 and others use wan2 >>>> what's way to doing that ? pleas hellp me
after reboot it again asks for installation of the softwares, i press "a" and then "i". it reboots and again same cycle goes on. help please. note I am using virtual box.
Yasir, you need to remove your installation media. The CD / DVD or the drive from where you installed RouterOs for Mikrotik. Alternatively, you can also change your boot sequence to avoid such problem.
I set VPN server on my mikrotik na RDP is working ok via VPN, but when I add mark routing RDP is not working via VPN can you tell me what other step I need to do to sort it this problem
Perfect. Used this tutorial as startup configuration to switch internal caps to internal traffic and guest caps to external traffic, with capsman and 2 SSIDs
I used the configuration as taught here and all is working fine, but I have an issue; when in LAN1 i can ping the gateway but i can't ping other clients in LAN1, please can you help?
Very good tutorial, Mikrotik Route Load Sharing (LAN1 to WAN1 and LAN2 to WAN2) can you add the HotSpot for this tutorial?
If i don't want to separate traffic , the video ends for me at 5:05?right? And the mikrotik do the the load balancing automatically?
hi, where did you get the routing mark - "WAN1-LAN1" and "WAN2-LAN2"... configuration not shown on the video... can you show the details for that routing mark...
hi could you configure it?
hi! sorry but in the minute 8:00 onwards, he select en routing mark "WAN1-LAN1" but that was not the one he configured before !! somebody can i explain!
I noticed too...Does anyone have any explanation to this please?
@@johnmikky9517 What do you want to know... Do you Make traffic exit the same WAN interface it came in ???????????
Most demandable tutorial. Will you please provide any text note for batter understanding? After all thanks a lot
Very good tutorial, but how can I solve the problem of portforwarding(d-nat) and sticky sessions related portforward(dnat)? Thanks
thank you very much.
super thanks
+Dawid Trojanowski :)
any update to my request to add hotspot for this tutorial?
+Dave Lodia : will upload once available
How can I with Wlan1 to Wan1 and Wlan2 to Wan2...
Thanks for this tutorial, it works but I have 2 problems :
1. hosts on LAN1 cannot reach hosts on LAN2
2. cannot ping public IP of WAN1 and WAN2
How can I do to resolve those problems ?
I have the same problem, I must use two RB , make Ip tunel and set routes criss-cross from one RB to other.
Create accept rule from Source LAN1 to Des LAN2 and Source LAN2 to Des LAN1 in mangle
Create accept rule for any destination you want
@@PhallaCCMT
I create the rule but it doesn't work.
Can you improve video quality? Most of it I must guess.
Video not HD?
mark routing!!!
nice way ok ...
me i have 2 wan and 1lan , and i want to separate users some of them use wan1 and others use wan2 >>>> what's way to doing that ? pleas hellp me
after reboot
it again asks for installation of the softwares, i press "a" and then
"i". it reboots and again same cycle goes on. help please.
note I am using virtual box.
Yasir, you need to remove your installation media. The CD / DVD or the drive from where you installed RouterOs for Mikrotik. Alternatively, you can also change your boot sequence to avoid such problem.
I set VPN server on my mikrotik na RDP is working ok via VPN, but when I add mark routing RDP is not working via VPN can you tell me what other step I need to do to sort it this problem
I have the same problem in the same scenario. Have you figured out how to solve it?