I do have a 1.8x300 spring from a nexus pro x upgrade spring in my kunlun and I’m getting 300 fps with my Sabre heavy darts using the stock barrel and a Gavin fuzzy bcar. Seems to be holding up nicely great blaster/ video! Keep it up! 👍
@@BradleyPhillipsYT have you ever had any of your blaster melt in your 35 to 45 degree weather, when testing your blasters or wherever? You’re using/working on your blasters?
@@ItzfroxenNo, that's only really an issue with 3D printed blasters, and even then, more so if you leave them in a hot car to exceed ambient temperature.
I've been running a Swift 1.8 Spring cut down and squared off to 280mm reaching 310-320fps with Sabre Heavies, this is in Brisbane's Summer 32 degrees, 60-70% humidity.
When you compare temperatures don’t forget about wetness (I’m not sure the last word is correct) For example in Saint Petersburg winter feels much more colder then in Moscow cause of this
I wonder how that spring would do in the harrier, I got the 1.6 300mm in there now and the prime is kinda hard even with the red cowl bearing. This is a thicker spring but not as long... Thoughts Bradley?
Sorry I’m not sure if you have answered in a previous comment but what scope is that cuz it looks rlly good on the kunlun. Ps: what do you think would happen if you put this spring and the 300 fls spring in at the same time?
@@Samuraifr-bs it's a Holosun HS506 red dot sight. And if you put both springs in I don't think there will be enough space to let the plunger come back past the catch.
Lol's... thats a very different spring I recieved. I was sent from worker 1.8 270mm springs that they claim is a 380fps. Hits 360-370fps all day long on the right darts. So there must be a few different springs that they are going to release. On the 1.3g t-darts that spring hits 330fps all day long.
I can't keep myself from asking..... did you through some more silicon grease on there, and we just didn't see.? All O-rings aren't created equal. I prefer Nitrile Rubber(synthetic rubber) because they're waaaaay tougher than conventional rubber.
Where to find the Worker Kunlun:
Out of Darts (USA): outofdarts.com/products/worker-kunlun?ref=RIa3bVI3vXYhUs
Foamwork Adelaide (AUS): Coming Soon
Blastertech (AUS): www.blastertech.com.au/product/kunlun-worker-blaster
Sabre 1.3gram Tdarts (USA): outofdarts.com/products/sabre-t-darts-heavyweight-short-darts-200-pack-1-3g?ref=RIa3bVI3vXYhUs
Sabre BCAR (USA): outofdarts.com/products/sabre-metal-bcar?ref=RIa3bVI3vXYhUs
Liking the behind-the-scenes info with your camera setups as well, it’s appreciated
Shall try out 50m or 55 yards accuracy test.
Hi,
I'm living in France and your videos are impressive. Thank you for your work.👍🏽👍🏽👍🏽
I do have a 1.8x300 spring from a nexus pro x upgrade spring in my kunlun and I’m getting 300 fps with my Sabre heavy darts using the stock barrel and a Gavin fuzzy bcar. Seems to be holding up nicely great blaster/ video! Keep it up! 👍
Not sure how you got it in there but good job👍 I barely got my cut down Swift spring 28cmx1.8 in there
We love you with the worker kunlun
Nice slow motion setup!
Hell yeah! Nice one legend
Are you going to do reviews on like normal nerf, xshot or adventure force blasters?
@@Itzfroxen I don't bother reviewing trash
@@BradleyPhillipsYT ture
@@BradleyPhillipsYT facts 😂
106F in February?!? Do y'all even get a winter?
@@NateBenson-s6i yes, during your summer.
@@BradleyPhillipsYT Ah, that's right, you're in the southern hemisphere so your seasons are reversed.
Are you thinking of going back to doing YT short, I really liked those videos
Are you thinking of ever doing a video on full length dart blaster?
@@Itzfroxen like which one?
Full lengths kinda worthless for competitive play
@@BradleyPhillipsYT Not any of the pro blaster so like 110fps or lower
@@BradleyPhillipsYT have you ever had any of your blaster melt in your 35 to 45 degree weather, when testing your blasters or wherever? You’re using/working on your blasters?
@@ItzfroxenNo, that's only really an issue with 3D printed blasters, and even then, more so if you leave them in a hot car to exceed ambient temperature.
I've been running a Swift 1.8 Spring cut down and squared off to 280mm reaching 310-320fps with Sabre Heavies, this is in Brisbane's Summer 32 degrees, 60-70% humidity.
Man, I cant imagine plinking outdoors at 41ºC when I feel like melting at 30ºC in México City, take care now
When you compare temperatures don’t forget about wetness (I’m not sure the last word is correct)
For example in Saint Petersburg winter feels much more colder then in Moscow cause of this
What is the o ring size anyway
I wonder how that spring would do in the harrier, I got the 1.6 300mm in there now and the prime is kinda hard even with the red cowl bearing. This is a thicker spring but not as long... Thoughts Bradley?
@@3SonsRC given that the Harrier has a low air volume than the Kunlun is estimate about 330fps at a guess down from 350fps.
@BradleyPhillipsYT you think the prime might be better on the harrier than with the 1.6 300mm?
@@3SonsRCyeah it'd be a lighter prime
Sorry I’m not sure if you have answered in a previous comment but what scope is that cuz it looks rlly good on the kunlun. Ps: what do you think would happen if you put this spring and the 300 fls spring in at the same time?
@@Samuraifr-bs it's a Holosun HS506 red dot sight. And if you put both springs in I don't think there will be enough space to let the plunger come back past the catch.
Thanks I’ve had my eye on this blaster for ages and I’ve been saving! Also really quick reply too lol
Really expensive scope 😅😅😅 have to decide between Sabre bcar and a scope now
Lol's... thats a very different spring I recieved. I was sent from worker 1.8 270mm springs that they claim is a 380fps. Hits 360-370fps all day long on the right darts. So there must be a few different springs that they are going to release. On the 1.3g t-darts that spring hits 330fps all day long.
What about the full metal kunlun?
@@zparticle_ haven't looked at the price tag yet but I'm guessing it's pretty heavy as well 😅
@@BradleyPhillipsYT900 US dollars 😳
@@foamfanatix 680 when you buy directly from worker, and you are not stock with ugly orange
Yeah it’s super expensive, wasn’t expecting a review on it since there’s nothing special about it other than being metal
Hi Brad, is the Kunlan the best sniper at the moment? What would be your pick?
I'd go for practicality of a pump grip but that's just me personally. Something like the Apex Prime or Harrier.
@BradleyPhillipsYT thanks, I'll have a look
ZWQ Baize!!!
Well I’m sold. Gonna by a kunlun now
@@atlasunit22 it's a pretty sick bolt action blaster
@@BradleyPhillipsYT oh I know bolt actions are fun to use. I was on the fence about getting one until now. thanks for the video.
O-rings snapping that frequently, is the fps getting a little too high now?
This doesn't happen with other blasters that I use
Hmm… SD of 5.6 and 6.6 for the DZ darts (Nitroshot+?) which means they would be accurate AF.
It desperately need a longer barrel
I can't keep myself from asking..... did you through some more silicon grease on there, and we just didn't see.?
All O-rings aren't created equal.
I prefer Nitrile Rubber(synthetic rubber) because they're waaaaay tougher than conventional rubber.
please do 40m test😂
@@breakice1986 can do what ever distance you would like. What it won't change though is the result.
@BradleyPhillipsYT nice bro🤣
why no bcar for chrono? In your words "Chrono without a scar or bcar is cheating"
Different people will use different BCARs. Some affect fps, some do not.
First