H i i am trying to help a friend and not familiar with Spektrum ,after selecting the elevon mix it still does not mix do we need to rebind the rx to set it working.
@@reedy93 maybe , make sure you are using correct connections at Rx. Spektrum [1 ]is bind [2] is Throttle[3] is Aileron [4] is Elevator and [5] is Rudder. TAER, you should only need T- A-E. Rebind has not been an issue for me. Good luck!
Thanks, I tried your Spectrum Elevon setup for delta wing and have had no luck getting it to work correctly. How are the servos connected? Are you using Y cables?
No, you can't setup elevon with Y cable. Each servo has to have its own dedicated channel on receiver just like in my video. Find combination that works by switching servo cables on receiver and servo reversing on radio.
Don't forget to subscribe to my channel for regular updates here ► goo.gl/p92cip And , please , support my work by using my Banggood affiliate link ► goo.gl/cn1B2P
Osim toga, tko bi nama ugodio. Prijatelj Marko ua-cam.com/users/srepfler sve tutorijale radi na našem, pa su ga isto popljuvali zašto ne radi na engleskom. Najbolje snimiti odmah na bar 5 jezika pa da svi budu sretni i zadovoljni. 😀😁😂
Hello guys! Please anyone could tell me why my f-16 control surfaces dont work right?My problem is when i pull the stick down both elevator goes down and the same time ailerons goes up they work against each other .Tried reversing in transmitter did not work out good ,messed up even more i also changed on receiver aileron elevator did not work. I cancelled all mixing and used fy41ap and still didn t work.....any one have a clue what i do wrong?????
I just followed this first first time setup on edf wing. Spot on for my DX9 and needed to use the B mix. Thanks
H i i am trying to help a friend and not familiar with Spektrum ,after selecting the elevon mix it still does not mix do we need to rebind the rx to set it working.
@@reedy93 maybe , make sure you are using correct connections at Rx. Spektrum [1 ]is bind [2] is Throttle[3] is Aileron [4] is Elevator and [5] is Rudder. TAER, you should only need T- A-E. Rebind has not been an issue for me. Good luck!
@@kurtmccune9141 thanks for that, only see him at the flying field will have another go next time .
Thank you. You saved me. I have a Spektrum DX6E and I needed to invert the channels 2 and 3.
Thanks, this solved my issue with reversed pitch.
Thank you for the video, you are very clear how to do Evelon
Great tutorial, must have for radio beginner.
Great Help,Video was very good and easy to understand,best wishes from Scotland
thank you it helped me a lot
Thank You 🙂
Thanks, I tried your Spectrum Elevon setup for delta wing and have had no luck getting it to work correctly. How are the servos connected? Are you using Y cables?
No, you can't setup elevon with Y cable. Each servo has to have its own dedicated channel on receiver just like in my video. Find combination that works by switching servo cables on receiver and servo reversing on radio.
Very nice Gorazd. Oh yeah... Greetings from Slovenia, Robert
Nice
Thank you !! I’ve told you before & now !! I will say again. That your videos are the best tutorials on you tube ! Yes sir
Thank you!!
Thnks for your Video, it helped a lot... great work
Can you make s tutorial on how to do this on mc6c transmitter
Sorry but no, I don't have that transmitter only DX9
Could somebody out there please help me with my dx6e. There are no video s out there
can you do this on the DXS?
I don't know, I have only DX9
Don't forget to subscribe to my channel for regular updates here ► goo.gl/p92cip
And , please , support my work by using my Banggood affiliate link ► goo.gl/cn1B2P
C H A M P I O N
does not work for spectrum dx9e
Pun Qrac tutorijala na engleskom... Kad vec tutorijalises onda na nashki bolje da bude neke koristi :D
Ma mi smo snalažljiviji od ovih sa engleskog govornog područja, njima trebaju ovakvi jednostavni tutorijali, lako ja to prevedem i ubacim titlove :)
Osim toga, tko bi nama ugodio. Prijatelj Marko ua-cam.com/users/srepfler sve tutorijale radi na našem, pa su ga isto popljuvali zašto ne radi na engleskom. Najbolje snimiti odmah na bar 5 jezika pa da svi budu sretni i zadovoljni. 😀😁😂
Pratim Marka i ok su mu tutorijali, opusteno.... Angazuj odmah firmu za sinhronizaciju na 51 jezik :D :D :D
Hahaha, hoću, čim na Lotu dobijem :))))
Nema veze. Meni dobro dođe da vježbam engleski.
You could also reverse the channel .................
Hello guys! Please anyone could tell me why my f-16 control surfaces dont work right?My problem is when i pull the stick down both elevator goes down and the same time ailerons goes up they work against each other .Tried reversing in transmitter did not work out good ,messed up even more i also changed on receiver aileron elevator did not work. I cancelled all mixing and used fy41ap and still didn t work.....any one have a clue what i do wrong?????
Thanks!