Great video. Optionally, the ATtiny85 is capable of driving WS2812 without an external crystal. Opening up limited I/O ports for any projects. The hand off being decrease accuracy signal times.
Hi Eugene, I was about to ask if is possible to run this ATtiny85 without the external xtal, based on your comment the answer would be yes. Then, what would be the reason of the external xtal? Regards!
@@oscarmiramontes8496 All the tiny series have internal oscillators. I want to say with optimum voltages for the Tiny85 using 4.7-5.5V; trade off, as temperatures increase the less accurate the signal is. It also has two PWM pins 5 & 6 10-20MHz, depending on the package.
Currently the Attiny85 is worth more than every other component on that board and the board combined. This silicon shortage really is messing with hobbyists just as much as large companies. For those wondering, the Attiny85 is currently $6 PER CHIP on LCSC. I was designing a project using an 85 and wasn't pleased with the price, and found that the Attiny13A was a suitable replacement for the moment. Currently it costs something like $2 per chip, expensive but $4 cheaper than the 85.
hi friend!!!! what does it mean??? -> candidates: []2_PushButton:2:10: fatal error: WS2812.h: No such file or directory #include ^~~~~~~~~~ compilation terminated. exit status 1 WS2812.h: No such file or directory in the arduino file folder i put your ws2812h file..but i get this error ................ thanks!!!!
I saw this video while I was searching a 12 led random pattern circuit. I would like to have a same circuit with 12 or 15 leds only. Can u make a circuit diagram for me. I will pay for it.
Can you please make a video explaining about constant current to drive these led strip... As when the length of the strip increases its really tricky to get accurate brightness and color from it
Hello bro in your "Android Fingerprint ESP8266 Door Lock Control" video you have not mentioned that how to configer your fingerprint in the app. So can you please tell
Great video. Optionally, the ATtiny85 is capable of driving WS2812 without an external crystal. Opening up limited I/O ports for any projects. The hand off being decrease accuracy signal times.
Hi Eugene,
I was about to ask if is possible to run this ATtiny85 without the external xtal, based on your comment the answer would be yes. Then, what would be the reason of the external xtal? Regards!
@@oscarmiramontes8496 All the tiny series have internal oscillators. I want to say with optimum voltages for the Tiny85 using 4.7-5.5V; trade off, as temperatures increase the less accurate the signal is. It also has two PWM pins 5 & 6 10-20MHz, depending on the package.
@@eug1991 Timing accuracy, for this project, is not an issue.
Is there any specific reason why you did not use the built-in oscillator in the ATTINY85?
Currently the Attiny85 is worth more than every other component on that board and the board combined. This silicon shortage really is messing with hobbyists just as much as large companies. For those wondering, the Attiny85 is currently $6 PER CHIP on LCSC.
I was designing a project using an 85 and wasn't pleased with the price, and found that the Attiny13A was a suitable replacement for the moment. Currently it costs something like $2 per chip, expensive but $4 cheaper than the 85.
Sir mujhe sabhi mayerial chiye the jaise arduino + pcb bord+sheeld and code mill sakta hai kya
sir where you got this attiny85 ic can you plz tell me
Also is there a rainbow cycle on this my friend?
Hello friend, can you tell me what is the maximum amount of pixels possible to control with attiny?
How to make 2 Output Led Strips on Attiny85 sir? I dont know how to program it. Can u teach me (make tutorial)?
Are these neopixels bright enough to use as indicators for cars in broad sunlight???
hello how can i add static color? i need to add atleast 3 static color thanks
hi friend!!!! what does it mean???
-> candidates: []2_PushButton:2:10: fatal error: WS2812.h: No such file or directory
#include
^~~~~~~~~~
compilation terminated.
exit status 1
WS2812.h: No such file or directory
in the arduino file folder i put your ws2812h file..but i get this error ................
thanks!!!!
Nice project 😁👍🏼
Question: what kind of wire do you use to connect the terminals together ❓
I use 22GA (0.64mm) for +/-/sig to connect to 100 LED strip. No fires yet.
I saw this video while I was searching a 12 led random pattern circuit.
I would like to have a same circuit with 12 or 15 leds only. Can u make a circuit diagram for me. I will pay for it.
Very nice
What was the oscillator for ?
How to fix 'serial' was not declared?
I noticed that you used a 330ohms resistor in Din of ws2812b led strip in your electronic dice but here you didn't use a resistor
Nice video pro
i love you 💕💪😎
Dude, love your work!! This is just what I needed for my project!
Can I also ask what program you use for drawing out the schematics? (1:38)
It's frizting
'Fritzting'
Very good ❤
Where is the gerber file? I don't see it in the .zip
Wow Mst 😍
Hello bro can you please make a video about arduino's firmware update to a controller I want to steering wheel for euro truck sim
Can you please make a video explaining about constant current to drive these led strip... As when the length of the strip increases its really tricky to get accurate brightness and color from it
How to fix #define SERIAL Serial?
So sick mate 👍
I've been trying forever to get my attiny85s working.
I'm about to trash them
Hello bro in your "Android Fingerprint ESP8266 Door Lock Control" video you have not mentioned that how to configer your fingerprint in the app. So can you please tell
Great job ♥♥♥
Superb💪💪💪
bro how to make automatic stair light with rgb plz plz plz tell us bro plz make a vedio on that
bro plz leave a vedio on that bro plz how to make stair light using rgb
Hello, can we communicate together to work on a joint project between us
Superb
Please make a project which is under ₹200 or ₹500 I prefer ₹200
Mast Mast
#include "WS2812.h"
I modified like this ....................now compilation ok..............
Super virol science
Meke leser projector
First view
Bro please make Arduino vu meter using Arduino nano .. and I have send you all the thing on mail please check it out
Make esp32 to mask recogniser
Plz riply me
Second view
Thanku viral science for ❤.
Please upload a video every 2-3 days
👌👌👌👌
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
Plz check your mail id
First view
Third view