Always a pleasure to see your latest projects and attention to all the little details along the way (especially subgrades!). Here's hoping Dusty doesn't perform any MOW kitbashing, remaining instead in her supervisory position. ;)
I just love watching your videos Boomer. So informative and inspirational. Just as soon as I finish shoveling the four feet of snow that has been dumped in my little corner of Ontario, I will get back to modeling. Keep well.
Watching Boomer putting fast mache i can imagine him at diner in front of a plate of mashed potatoes. He flattened everything level then make a roadbed with ditches on both sides. Pretty sure he plays with its fork to create illusion of grass and pour some milk to fill the pond. Many layouts were designed on napkin behind a coffee at nearby greasy spoon. There´s no limit to let imagination being creative. Thanks Boomer to all tiny sparks you seed in us. You really deserve that membership.😊😊
Another inspirational and informative video Boomer! This next chapter of River Road is getting exciting. Looking forward to seeing some of the icons from Glover Road reimagined (hopefully, the Dairy Queen might make a reappearance lol). What a channel!!
Howdy Boomer! Well done sir. I'm onboard with starting small and expanding for the exact reason you mentioned... don't want to get overwhelmed! Thanks for sharing 🤠
It is easy to get lost in this part of the hobby if we get too far ahead. We end with a mass of unbaked layout and ultimately loose interest, or burnout in the end. Especially when we do not have a plan. Cheers.
thank you for posting. watching isn't like forgetting reality it's like understanding the real behind it all. the wash culvert is a good lesson in this, that everything's important.
Definitely on a roll Boomer, this area is full of interest which would normally be overlooked, a couple of buildings on Crush Crescent, plus the comms tower, but the loop trackwork is a gem !!!! Stay warm, best regards
You are the best, man. And thank you for your concern for those less fortunate than we. After continuously watching Dusty, I think I may need a new cat, although I love my six turtles a lot.
Thanks for the info on paper mache/sculptamold and making lists. I've been a fan of lists for a while, on several levels. I actually tend to use spreadsheets, for a couple reasons. There are several projects I'm running, sort of serial-parallel. Work on one project for a while until I hit a roadblock, switch to another as the inspiration hits, and keep the number down to about 3 or 4 active until one is done, then add another. Kind of goofy sounding, but it keeps me from burning out on a project and moving forward overall. The handy thing for me about spreadsheets over a small notebook is that I can track the next few steps on each project and tick them off as they are done, different sheets track the overall materials I have on hand and what I need the next time I hit a show, swap meet, or hobby shop, and I can copy the steps from my hobby spreadsheet over to my daily planner. Having them staring at me when I go onto my computer helps motivate me to jump on them. Plus, I can take photos or make a note on my smartphone when I'm sitting around waiting at an appointment and a thought hits me then copy them over to my computer and sort the information by project or topic. I add a date to my daily planner spreadsheets, and it's kind of neat to look back and go "Yeah, got some stuff done over this last week". An additional motivator to knock off at least one minor task. 🙂 Also lets me break down future projects into achievable chunks as well, and sometimes even eliminates making a mistake that requires rework. Now I've got the urge to do some terrain work when I get done soldering some feeders onto my rails today. PS, I like the Helluvagood French Onion dip too.😉
I just want to say thank you for the inspiration you have given me to persevere with my overly ambitious layout! Watching you work on the little things makes me want to be more productive…you have a great gift. Cheers from Melbourne Australia …
I work in a Hobby Shop in the states, and I tell everyone to check out your channel even if they are not into model railroading. I am not a model railroader, but everything you do can be transferred to other scales of modeling for scenery and whatnot. Keep making the videos, and I will continue to tell people about your channel.
TY Sir, as always! I look forward to each and every episode (lesson 🙂) that comes along. I enjoy seeing Dusty's appearances... I noticed a structure under build on a shelf. An upcoming video 😂?? As I've mentioned in the past, I'm along for the journey...
I agree Boomer about overwhelming ourselves in our layouts. I am also breaking it down in sections. I hope to get my freight house/team track section complete this winter
Hi Boomer, I really enjoy watching your videos & listening to your philosophy on modeling life. You’re a true inspiration to all of us. I keep a journal and right down the processes that work well for me, including some of your techniques to try. A 3-ring binder is helpful. Stay well my friend.
I'm trying your methods from your last video on Duncan Way on a road I'm replacing in Mondovi, and so far it looks better than anything I've tried in the past. That crackle paste is really nice, and I have 2 layers of color down so far. Thanks for the step-by-step instructions! (Also, as good as your videos are, we really only come here to see Dusty. 😀😀😀 )
Exciting to see you starting with section 3. Fun to build a new version of Gloverroad. I wonder if you have learn things over the years and do things different
As always, it's a pleasure watching you create such realistic worlds. I found the brush that you were using. It's currently available at Micheals. "DIY Home Chalk & Wax Brush Set by ArtMinds"
Dear Boomer, some great planing you did there. Definitely got Dusty’s attention. But on the more serious note; awesome how you kinda add ply to the plywood this way, especially when covered with the Varathane. Looking forward to seeing the road come to life! Cheerio
Boomer, you highlighted a detail that few in our hobby seem to understand or appreciate. That's of the subgrade. Most don't make allowances for the subgrade which then forces all sorts of compromises when it come's to building foundations, terrain, roads, etc. The mind's eye sees and know that something isn't right. It's this simple detail that is often the cause as to why something doesn't look right. Keep on having fun and sharing with us. P.S. I'm guessing that Dusty got her eviction notice for phase 3.
I like the idea of the celluclay scenery material . It'll be a first for me on a layout having used plaster ( yuck! ) in the past. The popular media doesn't push mache' so it wasn't on my radar . The bags on the switch stand are sacks of Quick-Crete cement. We used them for culvert wing walls and high erosion areas . Stack em , wet em and walk away. Enjoyed the video or my weekly " coffee with Boomer" episode. Thanks again for the tip earlier this week on varethane/cork. Cheers!
Boomer, you highlighted a detail that many in our hobby miss. The subgrade. By not making allowances for the subgrade, there's no room for terrain, proper grading of roads, ditches, building foundations, etc. The mind's eye sees it and knows something isn't right. It's missing this simple detail that is the root of the issue. Keep on having fun and sharing.
Hi Boomer you talk about space , I've got a hole 10mtrs of blank canvas to work with lol ,there's lots to look forward to modeling that. Having a memory like a goldfish doesn't help so I like to write a list especially if Im kitbashing a truck for the first time ,FYI just finished doing the stretched frame on the W900 . My son set out a small challenge for me to do, turned out great had plenty of Evergreen product to use. Merry Christmas
Another fine production, thankyou. I notice you appear to be using plastic (styrene?) sleepers ( an Aussi term for ties) under your turnouts? Can you tell me what thickness you are using please? I've always used finely milled wood, but the plastic might allow the point blades to move more freely, ie, less resistance! I like the way you've done that!
Are you watching on a T.V. If you are you are missing out. There is a Home page with over five hundred videos if you know how to navigate the Boomer Diorama channel and the search bar. e.g. Here. ua-cam.com/video/2exoCJyifq8/v-deo.html and here: ua-cam.com/video/EmzcwWR1JDc/v-deo.html
Boomer, you can use thin cork sheet to model a undilating road surface. Then a thin skim of plaster on top, now you can dress the road as you have with the other roads around River Road. Cheers, Chris Perry.
Thank you! No. I wish I had time to write an article and I certainly do not have a shortage of photographs. Hopefully one day I can find the time. Thanks for sharing!
Getting to where I’m looking forward to your Sunday modeling meditation. 🙏✌️✌️ HELP!!! I’m afraid I might have applied some GAC500 too thick. 72 hours later now and it is still a bit milky. Will this pass? Thanks 🙏
It will eventually. Try poking some holes into it. Then re-skim several times until you get it level. GAC500 is only good for very thin layers built up.
Hello ! Thanks for sharing continuously. Very inspiring ! Am now imagining a lot of things and before going on a « big » layout, am going to practice and experiment so technics and materials on a very small section. Am wondering : after drying, is there no stain of « mat medium » left of the sand bag or in the ballast at all ? Does it leave a clean surface like there is no additional treatment required ? Do you use the mat medium straight from the container ? It’s not so easy to purchase in France so … just wanting to know more before going on … Cheers 🇫🇷
You can dilute the matte medium with water. I use it straight for the sand bags but heavily diluted with water for ballast. It dry's flat and transparent if you apply it correctly.
I've seen several pictures and videos of locomotive vs. semi trailers and I am flabbergasted at how drivers aren't aware of what they are doing. Shippers and customers should work together and harder to supply instructions for drivers where trucks can't drive through. Losses to both parties seem like they would already thinking about this point.
I've pulled rgn's (lowboys) since about 2016, plus trailers that stretch (windmill blades for a couple of years and now "tail-roll" trailers in the North Dakota/Montana oilfield) and there are even highway grade crossings here in the US that will high-center such trailers. One of our permit routes when hauling blades in Oklahoma required crossing UP in one of the towns and we had to raise our suspensions as far as possible and use every one of our metal shim plates to increase the height of the trailer center beam. Then we'd have to call UP to get clearance to cross... Pulling the lowboys taught one very quickly about respecting ground clearance, for the mechanical one I pulled for over four years couldn't be raised and when loaded heavy, rode only an inch or so off the pavement. I knew better than to attempt a lot of the grade crossings I saw over the years. I've been in trucks off and on since '93 and unfortunately see a trend of many "green" drivers these days, even in the heavy-haul. Truck access to various shippers is often far from ideal, as well, so a number of factors combine in some locations to create frequent problems. It's been frustrating to witness some of the changes in drivers these days.
I usually use 1/8 balsa for roads. Road width depends on many factors. I usually use "Google" earth to find a road or measure a real one. Lanes ten to be 12'-14' feet wide between the lines. Do you have a model railroad ruler?
I know you are a proponent of Golden and Liquitex acrylic matte medium, but have you used Modge Podge? Is it also an acrylic product? I could not find info on line. I did an experiment trying to thin Modge Podge (MP) with IPA. It became a gelatinous sludge! I was looking to spray glue around some steel track so I thought I could remove the water content. I figured if acrylic paints could be thinned with IPA then the same for The MP. Apparently not….LOL. Any experience with MP?
I was checking the rail height to make sure it is the same level as the crossing pavement which is balsa wood covered in acrylic paste. I show how I cover the wood here: ua-cam.com/video/pQL0wYgOrJQ/v-deo.html
The bench work is 57" inches high. It's not up to my chin, it's chest height. The higher bench work suits this style of (trackside) operation and it feels like you are there. in the real world, and not hovering over things like a high flying bird. Furthermore, higher benchwork allows me to have my work bench below along with roll-top desk, storage, etc. I assure you, everything is perfectly normal . . . ;-)
You are the “Bob Ross” of model railroading! Magnificent!
Thank you for the kind words.
choke. if he were bob ross this'd be built by play skool. he's an artist.
~ "We'll just put a happy little ditch over here..." 😂
@@mikebauer4343 Also a baby squirrel in his pocket.
Well, that's just ducky . Now the darn benchwork is a model! 😂
Another great video and tips/techniques. As always, appreciate you taking the time to record and post these videos!
O.K. You are welcome!
I've really loved watching your layouts evolve over the years. I am excited so see the extension of this. Thank you for sharing and bringing us along.
I am glad you are enjoying the journey. It's going to be fun to see Glover Road evolve.
Always love it when you include Dusty in your videos. Thanks for another great tutorial Boomer.
Sure thing! Cheers.😁
Thanks for putting your videos out. You inspire me and got me out of my rut back on the train layout
You are welcome!
Great videos to provide knowledge and inspiration
I appreciate that!
Very nice video my Friend great work thanks for posting .😊😊👍👍
I'm glad you enjoyed it!
Always a pleasure to see your latest projects and attention to all the little details along the way (especially subgrades!). Here's hoping Dusty doesn't perform any MOW kitbashing, remaining instead in her supervisory position. ;)
Thank you for watching!
I love the fact you highlight supplies you use. I appreciate that.
O.K. Sometimes I have to be careful as to not flag the product too much as it affects the channel brand sometimes in a negative way. Cheers.
I just love watching your videos Boomer. So informative and inspirational. Just as soon as I finish shoveling the four feet of snow that has been dumped in my little corner of Ontario, I will get back to modeling. Keep well.
Thank you! Stay warm! 😊
Great video as always, learning some techniques as always!
You are so welcome! Glad you are finding it useful!
Watching Boomer putting fast mache i can imagine him at diner in front of a plate of mashed potatoes. He flattened everything level then make a roadbed with ditches on both sides. Pretty sure he plays with its fork to create illusion of grass and pour some milk to fill the pond. Many layouts were designed on napkin behind a coffee at nearby greasy spoon. There´s no limit to let imagination being creative.
Thanks Boomer to all tiny sparks you seed in us. You really deserve that membership.😊😊
Thanks for the kind words. Cheers!
Love your art work, reflections and calm voice ! Have a good one sir !
It certainly is a therapeutic hobby for sure. Thanks for sharing. ;-)
Thanks for your continuing encouragement and inspiration to all of us Boomer.
Best wishes for Christmas, cheers Peter from downunder.
O.K. Awesome!
Another inspirational and informative video Boomer! This next chapter of River Road is getting exciting. Looking forward to seeing some of the icons from Glover Road reimagined (hopefully, the Dairy Queen might make a reappearance lol). What a channel!!
Thank you Peter! I hope to keep all the original buildings for the original Glover Road which I still have.
Thank you Boomer, Merry Christmas to you and yours.
You're welcome! Merry Christmas to you as well!
Howdy Boomer! Well done sir. I'm onboard with starting small and expanding for the exact reason you mentioned... don't want to get overwhelmed! Thanks for sharing 🤠
It is easy to get lost in this part of the hobby if we get too far ahead. We end with a mass of unbaked layout and ultimately loose interest, or burnout in the end. Especially when we do not have a plan. Cheers.
Your really a pleasure to watch and what a wealth of knowledge . God Bless
Thank you, I appreciate the kind words.
thank you for posting. watching isn't like forgetting reality it's like understanding the real behind it all. the wash culvert is a good lesson in this, that everything's important.
I think the culvert is a key element to this part of the project.
Definitely on a roll Boomer, this area is full of interest which would normally be overlooked, a couple of buildings on Crush Crescent, plus the comms tower, but the loop trackwork is a gem !!!!
Stay warm, best regards
Thanks for watching, and I appreciate the kind words!
You are the best, man. And thank you for your concern for those less fortunate than we. After continuously watching Dusty, I think I may need a new cat, although I love my six turtles a lot.
Turtles are very cute as well. ;-)
Thanks for the info on paper mache/sculptamold and making lists. I've been a fan of lists for a while, on several levels. I actually tend to use spreadsheets, for a couple reasons. There are several projects I'm running, sort of serial-parallel. Work on one project for a while until I hit a roadblock, switch to another as the inspiration hits, and keep the number down to about 3 or 4 active until one is done, then add another. Kind of goofy sounding, but it keeps me from burning out on a project and moving forward overall.
The handy thing for me about spreadsheets over a small notebook is that I can track the next few steps on each project and tick them off as they are done, different sheets track the overall materials I have on hand and what I need the next time I hit a show, swap meet, or hobby shop, and I can copy the steps from my hobby spreadsheet over to my daily planner. Having them staring at me when I go onto my computer helps motivate me to jump on them. Plus, I can take photos or make a note on my smartphone when I'm sitting around waiting at an appointment and a thought hits me then copy them over to my computer and sort the information by project or topic. I add a date to my daily planner spreadsheets, and it's kind of neat to look back and go "Yeah, got some stuff done over this last week". An additional motivator to knock off at least one minor task. 🙂 Also lets me break down future projects into achievable chunks as well, and sometimes even eliminates making a mistake that requires rework.
Now I've got the urge to do some terrain work when I get done soldering some feeders onto my rails today.
PS, I like the Helluvagood French Onion dip too.😉
Planning and keeping a list of goals is paramount when it comes to progress for me.
I just want to say thank you for the inspiration you have given me to persevere with my overly ambitious layout! Watching you work on the little things makes me want to be more productive…you have a great gift. Cheers from Melbourne Australia …
You are so welcome!
I work in a Hobby Shop in the states, and I tell everyone to check out your channel even if they are not into model railroading. I am not a model railroader, but everything you do can be transferred to other scales of modeling for scenery and whatnot. Keep making the videos, and I will continue to tell people about your channel.
Thank you so much for sharing the channel! Cheers ~ Boomer.
Every time I see you start with something so simple like this, I know we are in for something wondrous. I'm headed to the train room now.
Awesome! Nothing like heading for the train room!
Keep going man, love the content - have done for years!
River road, Glover Road, and of course chief of operations - Dusty 😂
Much appreciated!
So cool to see the next section begin to grow
Yes indeed!
Such a fantastic layout, love how it evolves over time. Look forward to your videos 🚂🐕
Thank you for watching!
Boomer. Congrats on 30K+ subscribers! Thanks as always for your passion, wisdom, and resulting inspiration for others!
O.K. Thank you!
TY Sir, as always! I look forward to each and every episode (lesson 🙂) that comes along. I enjoy seeing Dusty's appearances...
I noticed a structure under build on a shelf. An upcoming video 😂??
As I've mentioned in the past, I'm along for the journey...
Almost everything you see gets covered eventually in one way or another. It all depends on the post production schedule, etc. Cheers!
@boomerdiorama 🤣🤣
Nice Tichy sack stacking. They do have some cool products. 🤘
I have a bunch of them, and I agree, they look great!
Fantastic Boomer all the way from Kansas, I loved Glover Road . . .
Kansas! . . . what a cool state that is. Cheers and welcome!
Nice work ❤
Thank you! 😊
Dusty is without a doubt, the most chill, poker faced trainmaster I’ve ever seen.😁
She loves every aspect of the layout. She really believes that she is in charge of things. ;-)
Dusty sure loves a new section
She does!
This next section is looking good.
Thank you!
Great job on the 30k and well deserved!!!
Thanks for watching the channel and all the support! Cheers!
I agree Boomer about overwhelming ourselves in our layouts. I am also breaking it down in sections. I hope to get my freight house/team track section complete this winter
Sounds good. Cheers!
Hi Boomer, I really enjoy watching your videos & listening to your philosophy on modeling life. You’re a true inspiration to all of us. I keep a journal and right down the processes that work well for me, including some of your techniques to try. A 3-ring binder is helpful. Stay well my friend.
I'm glad you find my videos helpful. Stay well!
The chill zone
Yes!
I'm trying your methods from your last video on Duncan Way on a road I'm replacing in Mondovi, and so far it looks better than anything I've tried in the past. That crackle paste is really nice, and I have 2 layers of color down so far. Thanks for the step-by-step instructions! (Also, as good as your videos are, we really only come here to see Dusty. 😀😀😀 )
I’m glad you like the crackle paste. It takes a little getting used to, but the results can be quite stunning and random as is the real world. Cheers!
Exciting to see you starting with section 3. Fun to build a new version of Gloverroad. I wonder if you have learn things over the years and do things different
I think we all do learn as we go.
The next great Tutorial video. Thank's Boomer.
You're welcome!
Looking forward to the upcoming videos👍👍👍
There will be plenty more coming!
As always, it's a pleasure watching you create such realistic worlds.
I found the brush that you were using. It's currently available at Micheals. "DIY Home Chalk & Wax Brush Set by ArtMinds"
O.K. That's it! It's a good one to get for your paint kit. ;-)
Dear Boomer, some great planing you did there. Definitely got Dusty’s attention. But on the more serious note; awesome how you kinda add ply to the plywood this way, especially when covered with the Varathane. Looking forward to seeing the road come to life! Cheerio
I forgot about the subtle elevation change during early planning so I had to pack it out some. Cheers.
Boomer, you highlighted a detail that few in our hobby seem to understand or appreciate. That's of the subgrade. Most don't make allowances for the subgrade which then forces all sorts of compromises when it come's to building foundations, terrain, roads, etc.
The mind's eye sees and know that something isn't right. It's this simple detail that is often the cause as to why something doesn't look right. Keep on having fun and sharing with us.
P.S. I'm guessing that Dusty got her eviction notice for phase 3.
I agree. Subgrade is the foundation for a good railroad!
Beautiful
Thanks for watching!
Thanks for helping me Boomer
Thank you for supporting the channel Fred! Cheers ~ Boomer.
@@boomerdioramamy pleasure Boomer 😊
I like the idea of the celluclay scenery material . It'll be a first for me on a layout having used plaster ( yuck! ) in the past. The popular media doesn't push mache' so it wasn't on my radar .
The bags on the switch stand are sacks of Quick-Crete cement. We used them for culvert wing walls and high erosion areas . Stack em , wet em and walk away.
Enjoyed the video or my weekly
" coffee with Boomer" episode. Thanks again for the tip earlier this week on varethane/cork.
Cheers!
Boomer, you highlighted a detail that many in our hobby miss. The subgrade. By not making allowances for the subgrade, there's no room for terrain, proper grading of roads, ditches, building foundations, etc.
The mind's eye sees it and knows something isn't right. It's missing this simple detail that is the root of the issue.
Keep on having fun and sharing.
Thanks for sharing that! Cheers!
Im excited to watch Glover Road v2 !
Me too!
Hahaha i know!! @boomerdiorama
Hi Boomer you talk about space , I've got a hole 10mtrs of blank canvas to work with lol ,there's lots to look forward to modeling that.
Having a memory like a goldfish doesn't help so I like to write a list especially if Im kitbashing a truck for the first time ,FYI just finished doing the stretched frame on the W900 . My son set out a small challenge for me to do, turned out great had plenty of Evergreen product to use.
Merry Christmas
I can’t imagine the possibilities with that much space. It's great you're looking forward to modeling so much!
great vlog on channel keep up the great vlogs thanks
Cheers!
I'm here for the cat.
Dusty. ;-)
Another fine production, thankyou.
I notice you appear to be using plastic (styrene?) sleepers ( an Aussi term for ties) under your turnouts? Can you tell me what thickness you are using please? I've always used finely milled wood, but the plastic might allow the point blades to move more freely, ie, less resistance! I like the way you've done that!
.060" x .080" for ties.
Hi. I'm (and probably not alone) interresting in seeing the global map of your layout in your room, not only what exist, but the final goal. Thanks
Are you watching on a T.V. If you are you are missing out. There is a Home page with over five hundred videos if you know how to navigate the Boomer Diorama channel and the search bar.
e.g. Here. ua-cam.com/video/2exoCJyifq8/v-deo.html and here: ua-cam.com/video/EmzcwWR1JDc/v-deo.html
Boomer, you can use thin cork sheet to model a undilating road surface. Then a thin skim of plaster on top, now you can dress the road as you have with the other roads around River Road. Cheers, Chris Perry.
Sounds great!
Love your videos Boomer, what is it you use to adhere the track to the cork...thank you again. I have learned a lot by watching your videos.
I use CA Medium (Super Glue). The video is here: ua-cam.com/video/EmzcwWR1JDc/v-deo.html
If you're talking about the signal between 64th Ave. and the overpass, it's called an 'Intermediate' signal. 😉
Yes. I think you are right. ;-)
I'm a retired CPkc Signal Maintainer and I worked that territory many times.
HeluvaGood video #nosponsor 🧀😁
;-) Thank you Bill!. Cheers! 😉😊
Oh okay, so section 3 is Glover rd., good to know, thx.
It is actually Milner on Glover Road. But Glover Road is fine. ;-)
Have you been featured in Model Railroader? Your work is highly detailed! Excellent!
Thank you! No. I wish I had time to write an article and I certainly do not have a shortage of photographs. Hopefully one day I can find the time. Thanks for sharing!
Getting to where I’m looking forward to your Sunday modeling meditation. 🙏✌️✌️
HELP!!! I’m afraid I might have applied some GAC500 too thick. 72 hours later now and it is still a bit milky. Will this pass? Thanks 🙏
It will eventually. Try poking some holes into it. Then re-skim several times until you get it level. GAC500 is only good for very thin layers built up.
Hello ! Thanks for sharing continuously. Very inspiring ! Am now imagining a lot of things and before going on a « big » layout, am going to practice and experiment so technics and materials on a very small section. Am wondering : after drying, is there no stain of « mat medium » left of the sand bag or in the ballast at all ? Does it leave a clean surface like there is no additional treatment required ? Do you use the mat medium straight from the container ?
It’s not so easy to purchase in France so … just wanting to know more before going on …
Cheers 🇫🇷
You can dilute the matte medium with water. I use it straight for the sand bags but heavily diluted with water for ballast. It dry's flat and transparent if you apply it correctly.
@ thank you for sharing your knowledge and experience. Warm Regards
Fascinating, as usual. I'm curious, though. I noticed this on the last video, too. Why do you remove the rails from the ties on the flex track?
I never removed the rails. That section is Central Valley Ties without rail. You can add your own code rail to the ties after paint and ballasting.
you should consider laying some oo gauge peco code 75 concrete at some point
There are no concrete ties in this area.
I've seen several pictures and videos of locomotive vs. semi trailers and I am flabbergasted at how drivers aren't aware of what they are doing. Shippers and customers should work together and harder to supply instructions for drivers where trucks can't drive through. Losses to both parties seem like they would already thinking about this point.
There are lot's of roads that don't meet the standard required for low-beds. Especially in rural farming communities.
I've pulled rgn's (lowboys) since about 2016, plus trailers that stretch (windmill blades for a couple of years and now "tail-roll" trailers in the North Dakota/Montana oilfield) and there are even highway grade crossings here in the US that will high-center such trailers. One of our permit routes when hauling blades in Oklahoma required crossing UP in one of the towns and we had to raise our suspensions as far as possible and use every one of our metal shim plates to increase the height of the trailer center beam. Then we'd have to call UP to get clearance to cross...
Pulling the lowboys taught one very quickly about respecting ground clearance, for the mechanical one I pulled for over four years couldn't be raised and when loaded heavy, rode only an inch or so off the pavement. I knew better than to attempt a lot of the grade crossings I saw over the years.
I've been in trucks off and on since '93 and unfortunately see a trend of many "green" drivers these days, even in the heavy-haul. Truck access to various shippers is often far from ideal, as well, so a number of factors combine in some locations to create frequent problems. It's been frustrating to witness some of the changes in drivers these days.
Dusty 😹 😻
😁👍
How thick is the balsa that you use for roads? How wide do you make a full two-lane road?
I usually use 1/8 balsa for roads. Road width depends on many factors. I usually use "Google" earth to find a road or measure a real one. Lanes ten to be 12'-14' feet wide between the lines. Do you have a model railroad ruler?
@@boomerdioramaYes! I do have a scale ruler. Thank you for the help again!
I know you are a proponent of Golden and Liquitex acrylic matte medium, but have you used Modge Podge? Is it also an acrylic product? I could not find info on line. I did an experiment trying to thin Modge Podge (MP) with IPA. It became a gelatinous sludge! I was looking to spray glue around some steel track so I thought I could remove the water content. I figured if acrylic paints could be thinned with IPA then the same for The MP. Apparently not….LOL. Any experience with MP?
Yes. Only once 30 years ago. Ever since . . . never. ;-)
@ is it an acrylic base?
I believe it is but made with a different (lower quality) recipe.
@@boomerdiorama thanks. I enjoy your videos.
Did you give Dusty a eviction notice next to her water?
Section 0ne and Two is off limits for Dusty. She still has free reign on section Three. IPEX Plastics is her nest for now. ;-)
@ good thing that she likes you
What is this metal triangle for?
I was checking the rail height to make sure it is the same level as the crossing pavement which is balsa wood covered in acrylic paste. I show how I cover the wood here: ua-cam.com/video/pQL0wYgOrJQ/v-deo.html
Sorry Boomer I’m just lost for words except please don’t stop showing videos of your build
O.K. The build will go on however long it takes. Cheers. ;-)
As I’m watching this video I realized your benchwork is up to your chin. Why is it that high?
The bench work is 57" inches high. It's not up to my chin, it's chest height.
The higher bench work suits this style of (trackside) operation and it feels like you are there. in the real world, and not hovering over things like a high flying bird. Furthermore, higher benchwork allows me to have my work bench below along with roll-top desk, storage, etc. I assure you, everything is perfectly normal . . . ;-)