Wow! Way to go. My problem was the figure of 8 bracket holding the barrel to the gauge, which is missing on yours. I ended up cutting the silencer off which was a whole new can of worms to sort out. Thanks Geoff in the UK.
The inlet molding (poppet) has fuzz from the manufacturing process around the periphery of the sealing face surface preventing good seal and thus a leak. I burnished mine on a smooth varnished surface, both on the face and the periphery. I inspected the moulding with a 10X loupe until all the fuzz was burnished off. Now, two years later, it is still just fine and seals perfectly.
Funny that you made this video. I just sent in my Urban to Gamo a few weeks ago for this issue. I have never been that frustrated trying to fix something before.
An interesting video, Aaron. I'm a UK viewer and I have the Gamo Coyote, which is the same gun under a different name for the UK market, and mine got an air leak on the inlet valve after about 18 months of use, probably because a tiny bit of dirt got in via the filler probe. (so my fault) I bought a set of seals for the whole rifle, but because I'd never taken a PCP apart and wasn't 100% sure it was *only* the filler valve that was leaking I handed it over to the gunsmith at my local range for him to take a look at. He used only 2 O-rings (the tiny one inside the valve, and the larger one that seals it to the cylinder) and charged me £20, which would be maybe $25. Obviously it was a simple fix for him to perform. Overall I'm very pleased with the rifle and apart from that one incident it doesn't leak when stored. Yes, the filler valve IS perhaps too complicated, but I would take some convincing that the Lane's one is intrinsically better or more reliable because hardly anyone has reported problems with the Gamo filler valve on the UK airgun forums.
I have owned one for 7 years now. First time I have shot it in around 3 years and was holding air from 3 years ago. Perfect. Never had a single issue in all these years.
Thank you for tip, this valve is pain in the bud. Bud I replace myne with hydraulic 0 rings from cattapiller. Bud when its fails again i gone replace mine with the robert lane valve system. I hope they sell them here over in europ. It take 6 to 9 mounth waiting to come EU. Thanks for the tips and tricks you showing to us 😉👌👍
Thank you for this video. I have the same problem in a Gamo Coyote. Change all the o rings on that cylinder and the leak continues. I just ordered that regulator from Ebay. Thank you very much.
Aaron: I have been following U for years, even bought the Urban on Ur rec. Never heard of this prob. until now. Just saw U on the sidebar, so i tuned in. never shot mine enough to have this prob., But I am downloading this vid for future ref. Thank U so much.
Yep, I know what you went through, I have a BSA buccaneer, has the same thing, I tried to fix it like you did, never got it to reseal. I ended up buying the same lane kit you did, end of problem!!!!
Aaron, Thank You for this video. I just chased 2 leaks on my Gamo Urban . First was from the Breech outer o-ring, Next day the fill valve outer o-ring. I ordered the new fill valve . The price has gone up to $95.19 including taxes and shipping (US dollar going down in value), No surprise : (
So I ordered the fill vale same as yours put it in my gun and it's held air all night, thank you for the video it really helped me out although it was almost $100 fix for a gun I got on sale for $230 about 6 years ago, like you I bought the outer seal kits and wasted money, wish I found your video first thank you
Thank you Aaron and Congrats on 10K subscribers. Have you considered getting the Umarex Notos? It's a fantastic gun at a fantastic price. I think it would be a perfect addition to your pesting guns.
i have also bought those exact parts from bangnall awhile back with no luck either . ended up buying another urban on sale for $240 and it holds fine, for now anyways
Thank you for doing this video ! I'm about to start my pcp journey and the Urban is my choice for my wife . I'll likely be needing this product. Thanks again for the valuable info, subscribed,
Aaron, I have a Gamo Urban. 22 also and its is leaking also. Do you have the part number for that kit from Lane Regulators? His site is down right now because he on a sailing trip. Your video is very informative! Thank you for your help! Jim Thompson
Hi Aaron, I bought an o-ring repair kit for my pcp air pistol because of an air leak similar to yours. I have a question if you don't mind seeing the o-ring kit you purchased is similar to the one I purchased and now waiting for it's arrival. Why do you not recommend the o-ring repair kit and is it because of the shipping? I purchased my o-ring kit from ebay and it is sent from the UK. I have never purchased outside the US before so I have some concerns. Thanks for your videos!
I have just bought the first kit you used shipped from the uk , it didn't have the internal o ring and my gun like yours still leaked , how has the lane one held up ?
THANKS AARON! i'd retired mine and purchased a Benjamin Kratos in .22 as a replacement! I might dig it out and do this upgrade/fix to have as a spare! I didn't see link. message from website " Dear Friends and Customers Due to an unexpected event, we have had to close temporarily. Yours Robert Lane" what is model number of kit you purchased, please?
Got a new pressure gauge today from Gamo USA. Wrong size. It won't thread into the black receptacle. Outside dimension of threads of the new one is 9.61mm. The original gauge measures about .03mm smaller. I'm sending it back but does anyone know the actual size of the pressure gauge threads on the Urban?
There is a quick fill kit for BSA air rifles. BSA is owned by Gamo, maybe try the BSA QF kit. If it doesn't work you can always return it and it does. problem solved.
Good morning, I am French, I translated the text into English with Google. What reference of the filling kit for my Gamo GX-40, it is identical to yours. Thanks in advance. Sincerely. guy
😊😊😊😊😊Last year in video of wildcat vs cricket camparo he said in comment section on asking of one subscriber that buying new stuff for new video is very expensive and he uploading videos from last 6 years its his words thats why he gets nervous and stoped making content.its fact after 6 years he gets nothing from yt but i am happy for him the suspense behind his absence is breaked down that means he is fine and fit. I love his videos and i care him. mr.aron please make one video or comment down or do reply us we miss you a lot😊😊😊😊😊😊😊😊
Man i miss ya buddy. Hope and pray all is good with ya Aaron. Your a good dude bro
Yeah, he's one of the few I've learned a lot from.
Hello Aaron. You are sorely missed! Hope all is well and that your desire to make videos awakens again. Stay safe🙂 Robin from Norway
Wow! Way to go. My problem was the figure of 8 bracket holding the barrel to the gauge, which is missing on yours. I ended up cutting the silencer off which was a whole new can of worms to sort out. Thanks Geoff in the UK.
The inlet molding (poppet) has fuzz from the manufacturing process around the periphery of the sealing face surface preventing good seal and thus a leak. I burnished mine on a smooth varnished surface, both on the face and the periphery. I inspected the moulding with a 10X loupe until all the fuzz was burnished off. Now, two years later, it is still just fine and seals perfectly.
Hey Aaron! Hope you are okay man!
Miss your well made and helpful videos brother!
I hope everything's ok he hasn't made a video in almost a year
Just checking back again. I hope all is well, I'm here in SW MI too. Btw My Dad went to Western, lost him 2 yrs ago @ 89.
Funny that you made this video. I just sent in my Urban to Gamo a few weeks ago for this issue. I have never been that frustrated trying to fix something before.
Just got it back. Still have the same problem. Not sure if I want to spend the $100 and buy the eBay part, so frustrating
An interesting video, Aaron. I'm a UK viewer and I have the Gamo Coyote, which is the same gun under a different name for the UK market, and mine got an air leak on the inlet valve after about 18 months of use, probably because a tiny bit of dirt got in via the filler probe. (so my fault)
I bought a set of seals for the whole rifle, but because I'd never taken a PCP apart and wasn't 100% sure it was *only* the filler valve that was leaking I handed it over to the gunsmith at my local range for him to take a look at. He used only 2 O-rings (the tiny one inside the valve, and the larger one that seals it to the cylinder) and charged me £20, which would be maybe $25. Obviously it was a simple fix for him to perform.
Overall I'm very pleased with the rifle and apart from that one incident it doesn't leak when stored. Yes, the filler valve IS perhaps too complicated, but I would take some convincing that the Lane's one is intrinsically better or more reliable because hardly anyone has reported problems with the Gamo filler valve on the UK airgun forums.
Man. You have so many
People here concerned about you. Shout out to us bro
Great info !! I've had my Urban for over two years now no problems at all with it ! It has not lost 1 psi setting in the gun rack over 8 months now !
TIMMY TIMMY TIMMY
I miss your videos! Hope all is well.
I have owned one for 7 years now. First time I have shot it in around 3 years and was holding air from 3 years ago. Perfect. Never had a single issue in all these years.
Hope you're doing okay Aaron!! ✌🏼
Hope all is well Aaron. Let’s us know you’re ok!
I am wondering too.
Thank you for tip, this valve is pain in the bud. Bud I replace myne with hydraulic 0 rings from cattapiller. Bud when its fails again i gone replace mine with the robert lane valve system. I hope they sell them here over in europ. It take 6 to 9 mounth waiting to come EU. Thanks for the tips and tricks you showing to us 😉👌👍
I like when the gauges are black. It looks cool with the colors popping out. 😎
aaron i havent seen any of you in quiet a while and i am hoping you are doing ok
Aaron Im happy you are fine🙏. Im in the PCP world for your MK videos👍. Be blessed
Thanks Aaron.. I've just been working on mine for the same problem... Looked for a new fill valve assembly couldn't find anything. Thanks again
Aaron hope to see you!
Awesome video, I will keep this in my head for when it happens. Thanks
Thank you for this video. I have the same problem in a Gamo Coyote. Change all the o rings on that cylinder and the leak continues. I just ordered that regulator from Ebay. Thank you very much.
Thanks, Aaron, for the info 👍 helps out alot urban Gamo is a great pcp air gun. Thanks for sharing, bsafe, buddy
Aaron: I have been following U for years, even bought the Urban on Ur rec. Never heard of this prob. until now. Just saw U on the sidebar, so i tuned in. never shot mine enough to have this prob., But I am downloading this vid for future ref. Thank U so much.
Yep, I know what you went through, I have a BSA buccaneer, has the same thing, I tried to fix it like you did, never got it to reseal. I ended up buying the same lane kit you did, end of problem!!!!
Aaron, Thank You for this video. I just chased 2 leaks on my Gamo Urban . First was from the Breech outer o-ring, Next day the fill valve outer o-ring. I ordered the new fill valve . The price has gone up to $95.19 including taxes and shipping (US dollar going down in value), No surprise : (
Wow...$95.19 ? what a deal. It is $300 in the USA.
@@alfaromeo6985 The price just went down $14 pounds AARRGGHH! The $95.19 is US dollars.
@@alfaromeo6985 $73.13GBP =$95.19US includes taxes and shipping.
Thanks for such an excellent video Aaron! Very informative and well done!
Thanks Aaron, my Urban22 has been leaking for the last year. This will help!
So I ordered the fill vale same as yours put it in my gun and it's held air all night, thank you for the video it really helped me out although it was almost $100 fix for a gun I got on sale for $230 about 6 years ago, like you I bought the outer seal kits and wasted money, wish I found your video first thank you
I love the presentation of your videos! Thanks
Thank you Aaron and Congrats on 10K subscribers. Have you considered getting the Umarex Notos? It's a fantastic gun at a fantastic price. I think it would be a perfect addition to your pesting guns.
I've heard the same about the Notos but at the same time that it's a copy of the Artemis PP750 in better clothing.
Congratulations on 10k subscribers
i have also bought those exact parts from bangnall awhile back with no luck either . ended up buying another urban on sale for $240 and it holds fine, for now anyways
Thank you for doing this video ! I'm about to start my pcp journey and the Urban is my choice for my wife . I'll likely be needing this product. Thanks again for the valuable info, subscribed,
Juat subbed. Is he just taking a break?
Hi Aaron, I hope all is well for you.
Awesome vidoe. Thanks for the info. BTW, love your cap!
Aaron, where ya at man? Hope all is well.
I can't wait to hear how it works.
I haven't heard from you you still alive.
Very informative Many Thanks 👍
Hey Aaron where ya at brother? Pray everything is all good with ya man.
Hey Aaron, I haven't seen you for a while. Are you still making content? Anyway, I wanted to let you know that you're missed.
Aaron, I have a Gamo Urban. 22 also and its is leaking also. Do you have the part number for that kit from Lane Regulators? His site is down right now because he on a sailing trip.
Your video is very informative!
Thank you for your help!
Jim Thompson
Aaron you ok,missing your vids man,shane uk.
laneregulators do a P35 reg as well if you ever get tired of changing the inlet seal o ring
Miss your videos… :(
I have the BSA / Gamo Scorpion .177 caliber ( same problem ) . ☹. Way to many o-rings talk about overkill . I know your frustration .
Any updates on you Aaron?
Hi Aaron, I bought an o-ring repair kit for my pcp air pistol because of an air leak similar to yours.
I have a question if you don't mind seeing the o-ring kit you purchased is similar to the one I purchased and now waiting for it's arrival.
Why do you not recommend the o-ring repair kit and is it because of the shipping? I purchased my o-ring kit from ebay and it is sent from the UK. I have never purchased outside the US before so I have some concerns.
Thanks for your videos!
Where you been?
Do you have to remove the barrel band to use the new valve?
Good info thanks !!!
I have just bought the first kit you used shipped from the uk , it didn't have the internal o ring and my gun like yours still leaked , how has the lane one held up ?
Any suggestions how to remove the inner brass piece (where the o-ring goes)? Mine is stuck. Rapping it on the table didn't work.
THANKS AARON! i'd retired mine and purchased a Benjamin Kratos in .22 as a replacement! I might dig it out and do this upgrade/fix to have as a spare! I didn't see link.
message from website "
Dear Friends and Customers
Due to an unexpected event, we have had to close temporarily. Yours Robert Lane"
what is model number of kit you purchased, please?
Just keep watching the site, it comes and goes, but Mr Lanes regs are just as good as any...
I don’t see the link ?
Thank you sir
What is the thread of the pcp guage?
That doesn’t effect the performance at all right? I mean its a fill port not a actual regulator?
Hope all is well sir,noticed that u haven’t uploaded in a while
Hes closed temporarily… per site notice :(
Got a new pressure gauge today from Gamo USA. Wrong size. It won't thread into the black receptacle. Outside dimension of threads of the new one is 9.61mm. The original gauge measures about .03mm smaller. I'm sending it back but does anyone know the actual size of the pressure gauge threads on the Urban?
Good video
Man I hope you’re OKAY. Have made a video in 6 months bud. I pray everything is all right.
Thinking the same way. Hope everything ok since it's been 6 months.
Is this channel shutdown? I miss Aaron
I cant find those on the website for gamos
There is a quick fill kit for BSA air rifles. BSA is owned by Gamo, maybe try the BSA QF kit. If it doesn't work you can always return it and it does. problem solved.
Good morning,
I am French, I translated the text into English with Google.
What reference of the filling kit for my Gamo GX-40, it is identical to yours.
Thanks in advance.
Sincerely.
guy
I thought the Gamo Urban was the "AK 47 of air rifles". AKs don't have mechanical problems.
Unfortunately Lane is temporarily not in business...
Do you talk to Airgun Pesting channel much these days?
Money, money, money, money, MONAY!!!
Thats way they/gamo make it so complicated!!!
for my money I will look for a different air gun
😊😊😊😊😊Last year in video of wildcat vs cricket camparo he said in comment section on asking of one subscriber that buying new stuff for new video is very expensive and he uploading videos from last 6 years its his words thats why he gets nervous and stoped making content.its fact after 6 years he gets nothing from yt but i am happy for him the suspense behind his absence is breaked down that means he is fine and fit. I love his videos and i care him. mr.aron please make one video or comment down or do reply us we miss you a lot😊😊😊😊😊😊😊😊
Mr. Aaron you ok? Missing you from india please reply 🙏🙏🙏🙏🙏🙏
Has something happened to Aaron?