What specifically are you looking to do? Do you currently have a Homey pro hub? Are you referring to set up of the homey pro security flow? Are you interested in the set up of the Heimdall app?
Hi! Where did you find the card "The state changed Armed"? I have looked around but cannot find it. Thanks for showing a method to set an armed state more intuitive than the surveillance mode switch.
I used that card initially, but I've now changed my flow and no longer can figure out how I accessed that card. I would recommend that you reach out to the developer of the Heimdall app, Danee de Kruyff to inquire at homey.app/en-us/app/com.uc.heimdall/Heimdall/ Just klick on "Suggest" to send him a message...
Great video! Curious about two items: 1). How did you get your Dome Siren to work with Homey Pro. I can only connect it as a generic z-wave device, so no fucntionality. 2). I see in your Flow you have a Blinking Lights Flow any chance you could do a video about that Flow or post a sample screen shot? TIA, please keep up the Homey Pro videos they are great.
I'm pleased that you are enjoying the Homey Pro content. I have more videos in the pipeline. I pulled the Dome Siren and many more devices installed on my SmartThings hub via the Homey SmartThings2 app which uses a SmartThings personal access token to pull all my devices into the Homey Pro Hub. Here is the video explaining the setup: ua-cam.com/video/r_pBOzPRU18/v-deo.html I have requested that Athom add support for Dome products. So hopefully we will see support for the Dome Siren in the future. As for the screenshot of the "Blinking Light Flow", go to my YT Channel Page, @BudsSmartHome and click on "more...". Scroll down to "Channel details" to "View my Email" and email me your request and I will send you the requested screenshot.
@@BudsSmartHome Thank you! It's great to know why I haven't been able to get the Dome Alarm to function. Perhaps Homey will add support of it, so I'll just be patient. Email regarding the Blinking Light Flow sent. Thanks again!
I don't get the virtual buttons or virtual deviced for disarmed, armed and partially armed. Is that done with another app? If so, do you need tocreate seperate advanced flows for those?
Search for the virtual devices app in the Homey store. Create three virtual devices. Name the devices, armed, disarmed, and partially armed. Create individual flows to to turn one tile on while turning the remaining two tiles off. As an example when the Heimdall mode changes to disarm change the virtual Disarm switch on and turn the armed and partially arm switches off.
@ yeah i found that app myself in the mean time. Also saw another video of yours that went way more in dept on the details of the flows 👍. Weird thing is, in the advanced flow you made (flow 1) for the virtual bittons for armed, disarmed and partially armed I cannot recreate this. The Heimdall app doesnt seem to offer me first state where I can select a change in state ‘partially armed’ for instance. Im basically missing that card as an option. Am I the only one that has that?
What kind of Window/Door Sensor do you use? I have tried Aqara Window/Door Sensor T1 and Water leak Sensor but nothing was connected to Homey Pro. Do you. know why?
Here is a guide to all of the Window/Door sensors that work with the Homey Pro hub: homey.app/en-us/best-buy-guide/door-and-window-sensors/ The Aqara T1 is not in the list, however the Aqara Door and Window Sensor P2 will work. I use the Third Reality and the Ring Alarm Gen 2 sensors in my home. I also use the Aeotec and SmartThings multipurpose sensors, however they are not directly compatible with Homey Pro at this time. I integrate the in Homey via the SmartThings 2 Homey Community app. More info on how to do that here: ua-cam.com/video/r_pBOzPRU18/v-deo.html
@@BudsSmartHome Thank you, I think I might be need to connect them through alexa. I'll think about it. Seems like Homey pro very limited integration right now. I was trying to connect to govee also doesn't work.
@@tikasub2230- this is likely a dumb question, but did you download the Govee app? homey.app/en-us/app/com.govee.developer/Govee/ Also, may I assume you are using the Homey Pro hub? I am asking because the device support is getting fairly expansive now.
@@BudsSmartHome yes when I Download Govee app my screen just spinning forever. Also I have Govee API and the result still spinning. I just got my homey pro last week and excited to use it but more likely everything still limited. I’d try Eufy camera app but the result just spinning.
Hi Bud, thanks for showing how you’re using Heimdall, great to see it used like that!
Absolutely! 😀👍
Do you have a step by step video on how you did this? New to all this. Excellent videos so far. Thanks
What specifically are you looking to do? Do you currently have a Homey pro hub? Are you referring to set up of the homey pro security flow? Are you interested in the set up of the Heimdall app?
@@BudsSmartHome Is any content in the level 1 or 2 membership?
No. We would likely need to accomplish this via a consulting arrangement.
@@BudsSmartHome I might reach out for that. Thank you.
Hi! Where did you find the card "The state changed Armed"? I have looked around but cannot find it. Thanks for showing a method to set an armed state more intuitive than the surveillance mode switch.
I used that card initially, but I've now changed my flow and no longer can figure out how I accessed that card. I would recommend that you reach out to the developer of the Heimdall app, Danee de Kruyff to inquire at homey.app/en-us/app/com.uc.heimdall/Heimdall/ Just klick on "Suggest" to send him a message...
Great video! Curious about two items: 1). How did you get your Dome Siren to work with Homey Pro. I can only connect it as a generic z-wave device, so no fucntionality. 2). I see in your Flow you have a Blinking Lights Flow any chance you could do a video about that Flow or post a sample screen shot? TIA, please keep up the Homey Pro videos they are great.
I'm pleased that you are enjoying the Homey Pro content. I have more videos in the pipeline.
I pulled the Dome Siren and many more devices installed on my SmartThings hub via the Homey SmartThings2 app which uses a SmartThings personal access token to pull all my devices into the Homey Pro Hub. Here is the video explaining the setup: ua-cam.com/video/r_pBOzPRU18/v-deo.html
I have requested that Athom add support for Dome products. So hopefully we will see support for the Dome Siren in the future.
As for the screenshot of the "Blinking Light Flow", go to my YT Channel Page, @BudsSmartHome and click on "more...". Scroll down to "Channel details" to "View my Email" and email me your request and I will send you the requested screenshot.
@@BudsSmartHome Thank you! It's great to know why I haven't been able to get the Dome Alarm to function. Perhaps Homey will add support of it, so I'll just be patient. Email regarding the Blinking Light Flow sent. Thanks again!
Just replied to your email request for a copy of the flow. Let me know if you have questions.
I don't get the virtual buttons or virtual deviced for disarmed, armed and partially armed. Is that done with another app? If so, do you need tocreate seperate advanced flows for those?
Search for the virtual devices app in the Homey store. Create three virtual devices. Name the devices, armed, disarmed, and partially armed. Create individual flows to to turn one tile on while turning the remaining two tiles off. As an example when the Heimdall mode changes to disarm change the virtual Disarm switch on and turn the armed and partially arm switches off.
@ yeah i found that app myself in the mean time. Also saw another video of yours that went way more in dept on the details of the flows 👍. Weird thing is, in the advanced flow you made (flow 1) for the virtual bittons for armed, disarmed and partially armed I cannot recreate this. The Heimdall app doesnt seem to offer me first state where I can select a change in state ‘partially armed’ for instance. Im basically missing that card as an option. Am I the only one that has that?
What kind of Window/Door Sensor do you use? I have tried Aqara Window/Door Sensor T1 and Water leak Sensor but nothing was connected to Homey Pro. Do you. know why?
Here is a guide to all of the Window/Door sensors that work with the Homey Pro hub: homey.app/en-us/best-buy-guide/door-and-window-sensors/ The Aqara T1 is not in the list, however the Aqara Door and Window Sensor P2 will work. I use the Third Reality and the Ring Alarm Gen 2 sensors in my home. I also use the Aeotec and SmartThings multipurpose sensors, however they are not directly compatible with Homey Pro at this time. I integrate the in Homey via the SmartThings 2 Homey Community app. More info on how to do that here: ua-cam.com/video/r_pBOzPRU18/v-deo.html
@@BudsSmartHome Thank you, I think I might be need to connect them through alexa. I'll think about it. Seems like Homey pro very limited integration right now. I was trying to connect to govee also doesn't work.
@@tikasub2230- this is likely a dumb question, but did you download the Govee app? homey.app/en-us/app/com.govee.developer/Govee/
Also, may I assume you are using the Homey Pro hub? I am asking because the device support is getting fairly expansive now.
@@BudsSmartHome yes when I Download Govee app my screen just spinning forever. Also I have Govee API and the result still spinning. I just got my homey pro last week and excited to use it but more likely everything still limited. I’d try Eufy camera app but the result just spinning.
@@BudsSmartHome I like homey pro because of advanced flow but a lot of people said it’s really hard to connect but when it’s connect it’s very stable.