How To Change Fuel Filter - BMW E46 DIY

Поділитися
Вставка
  • Опубліковано 9 лип 2018
  • Welcome to ShopLifeTV!
    Today I show you how to replace your fuel filter on a BMW 325i but the process is the same for other e46 models. 330i 328i 323i
    Merchandise: www.shoplifetv.com
    LS3 Swap: / @bmwselena
    Vlog Channel: / @moreshoplife
    Instagram: @ShopLifeTV
    / shoplifetv
    Disclaimer: The product links provided are often associated with an affiliate. When using any of the affiliate links I may get compensated for any products purchased using the link. This compensation does not affect my views on the product.
  • Авто та транспорт

КОМЕНТАРІ • 190

  • @ShopLifeTV
    @ShopLifeTV  5 років тому +6

    Fuel Filter With Regulator:
    click.linksynergy.com/link?id=BZfgVZ7JGM8&offerid=580643.12221963108&type=2&murl=https%3A%2F%2Fwww.ecstuning.com%2Fb-mann-parts%2Ffuel-filter%2F13327512019%7Eman%2F
    Fuel Hose:
    click.linksynergy.com/link?id=BZfgVZ7JGM8&offerid=580643.12222047712&type=2&murl=https%3A%2F%2Fwww.ecstuning.com%2Fb-rein-parts%2Ffuel-hose-one-meter-roll%2F13537563456%7Eren%2F

    • @garysanchez8876
      @garysanchez8876 4 роки тому

      Where does the vacuum line that goes on the front of the filter lead to. I found mine was broken on both ends but I don’t know where the other side goes to.

  • @shawnmatthews5118
    @shawnmatthews5118 4 роки тому +16

    Great video. You are one of the rare posters who speaks clearly and doesn’t omit steps while doing tutorials. Thank you.

  • @likits1999
    @likits1999 2 місяці тому +2

    I replaced this on my 01 330i today.
    The fuel rail pressure before I replaced it, was 45 PSI.
    I removed the fuel pump fuese #54 and ran the engin until it died.
    After I replace the fuel pressure regulator,the fuel rail pressure read 55 PSI.
    I determined that it was a little clogged.
    Thanks for the awesome video.

  • @primariochoa
    @primariochoa 3 роки тому +8

    When I need to replace something on my 2005 BMW 330CI just watch your tutorials and boom! solved, thanks for all your time and support to us, your videos always well explained step by step, know what, you are the best.

  • @penguinactually
    @penguinactually 5 років тому +18

    Appreciate you leaving everything in. Not just point out where bolts are and then cutting to the cover off and so on. Nice to see the whole process before going in

  • @stevesheets2815
    @stevesheets2815 5 років тому +63

    Wish ya was closer...so hard to find an honest mechanic..very talented and still so young..good luck...

    • @AChannel669
      @AChannel669 4 роки тому +3

      you dont need a mechanic for this job, or other 50 jobs...e46 is simple...you need something to replace? watch a video on youtube and go for it...nothing hard :)

    • @adoniasclark3360
      @adoniasclark3360 2 роки тому

      @@AChannel669 unless the parts are rusty don’t try it go to a mechanic

    • @AChannel669
      @AChannel669 2 роки тому

      @@adoniasclark3360 unless you have the tools for it...its all about tools...you dont have tools dont do it

  • @jtaylor4027
    @jtaylor4027 2 роки тому +65

    Safety tip: Remove fuel pump fuse (#54 on 2001 BMW 325I) And run car until it shuts off. Relieves pressure from lines. A mechanic would mention this.😉

    • @Flaming360Spider
      @Flaming360Spider 2 роки тому +3

      True it's a safety thing don't leave that fuel pump fuse on the car remove it to relieve pressure.

    • @gaborn4521
      @gaborn4521 Рік тому +1

      Sorry I dont get it, remove fuse and run the car until it shuts off? About how much time until this occur? Or until all fuel is gone?

    • @Seb-Storm
      @Seb-Storm Рік тому

      @@gaborn4521 it takes a couple of seconds. The lines don't hold that much fuel

    • @imhexztex4178
      @imhexztex4178 Рік тому +1

      I tried to do this but the car wouldn’t start when I pulled the fuse… does that mean there was no fuel pressure

    • @joaquinarias-moreno6785
      @joaquinarias-moreno6785 11 місяців тому

      Will this work on a 2002

  • @jordanleatham6373
    @jordanleatham6373 5 років тому +17

    Ankur, Thank you so much for making these videos. I recently bought my first E46 and have very little experience working on cars. Every time I have a problem with the car or need to work on something you have a video up that helps me get the job complete. Thank you so much for taking the time to create such great videos.

  • @bjersery
    @bjersery 5 років тому +5

    So good to have your videos to watch over and over to be better prepared for the projects I'm doing to my car. I was concerned about purchasing my BMW due to the stories of expensive repairs and preventive maintenance for this car. But after watching numerous video from your site I felt better about my decision to purchase the car. You have been a great resource for many of the repairs and maintenance I have done over the past several months. Thanks again for all the videos. I love my car and have enjoyed working on it!

  • @renragged
    @renragged 6 років тому +5

    I've still got to do this. One of the few remaining things to take care of on my E46. Thanks for sharing! Keep up the good work!

  • @alexbourg4165
    @alexbourg4165 4 роки тому +9

    Thanks for your videos! You are a huge help to the e46 community .

  • @mattz2386
    @mattz2386 6 років тому +4

    What a coincidence that you just posted this vid. I just ordered a new fuel filter a couple days ago. Thanks for the vid!

  • @isrealperez9069
    @isrealperez9069 5 років тому +2

    Find me watching your videos and you giving me input you have saved me a lot of money and without you I would have not known what to do this is my very first 2004 BMW 325xi thank you for your hard work and I appreciate your next two more videos have a blessed day thank you

  • @Oskari_Perttula
    @Oskari_Perttula 6 років тому +10

    Wow, what kind of a luck is this. I’m gonna change my fuel filter tomorrow and you just posted this video. Amazing 👍🏻

  • @illsuspect
    @illsuspect 5 років тому +2

    You always come through dude!

  • @casienova
    @casienova 4 роки тому +1

    Nice and clear explanation👍🏼Thanks dude!

  • @pianothatilove
    @pianothatilove 4 роки тому +1

    Absolutely amazing video👏🏻👏🏻👏🏻!

  • @jviews1
    @jviews1 Рік тому +1

    Thanks. great video. well engineered for easy change.

  • @gokok8553
    @gokok8553 3 роки тому +19

    Nice video. One thing - It is better not to put the fuel cover before you prime the fuel for flowing for few seconds (when you put the key to ignition position) so it is easier to diagnose if there is a leak in one of the hoses attached to the fuel filter or elsewhere under the cover. Even two people can do better, one turning the key to ignition another watching under the car for leak.

  • @onurgunay813
    @onurgunay813 Рік тому

    You are the best, you are the top thank you. Lots of loves from Türkiye

  • @kathehun6034
    @kathehun6034 4 роки тому

    This is what i was looking for i just changed the other diselfilter the big one wich is on the engine now i need to do this one .Good video man thanx ! I got an E39 530d i guess it isnt much different as far as the changing work goes ...You got yoursel a new subber !

  • @adrianlawrence5755
    @adrianlawrence5755 2 роки тому +1

    Very informative and helpful, thanks!

  • @joemartinez8211
    @joemartinez8211 5 років тому +1

    Thanks for the video. Great stuff!

  • @edgarsegura5888
    @edgarsegura5888 3 роки тому +1

    You’re the best!!!!! Good videos!

  • @mckalewirnsberger1910
    @mckalewirnsberger1910 3 роки тому +1

    It definitely helped! Thankyou . My Zhp has been acting really funky lately I replaced the fuel pump and it got better but still does it , so replacing the fuel filter today , it has 130k miles and idk if the filter is original or not

  • @SirFrancoQ
    @SirFrancoQ 2 роки тому +1

    Thanks mate , I will be changing mine in the next few days👍🏁

  • @Herb.
    @Herb. 5 років тому

    Simple, nice vid!

  • @user-vo1fz5mg9z
    @user-vo1fz5mg9z 5 років тому +1

    Nice video. Thanks

  • @synergycane9
    @synergycane9 2 роки тому

    Great video! Thank you 🙏

  • @edgarromero6071
    @edgarromero6071 5 років тому

    Thanks did mine today

  • @becomematrix
    @becomematrix 6 років тому +5

    I replaced both of the rubber hoses too. They were all fraying and had been indented by the hose clamps.

  • @shannon4968
    @shannon4968 4 місяці тому +1

    Thank you❤

  • @silestanix
    @silestanix 3 роки тому +2

    Wish you were closer here in the UK bro, so difficult to find a trustworthy mechanic these days !!

  • @MrNicoe36cabrio
    @MrNicoe36cabrio 6 років тому

    Great DIY again. Most of the owners didn't replace it because the filter isn't visible. I did my friend's e46 318i n46 2003, and it was never replaces before for 150t mls :0 . After that the engine had a much better start.... The n46 has this type of filter too. But maybe the e46 N46B18 was not sold in the USA..?...

  • @lesegokeakantse600
    @lesegokeakantse600 2 роки тому

    Very helpful

  • @alexedward1250
    @alexedward1250 2 роки тому

    Thank you for posting this video; nice job!, to your knowledge, is there any performance/longevity advantage for using the BMW fuel filter over the Mahle filter?

  • @poodlescone9700
    @poodlescone9700 5 років тому +5

    A good precaution is to check if there are any cracks on the rubber hose. If so, replace those, too, while everything is out.

    • @lanehart3486
      @lanehart3486 Рік тому

      What’s the measurements for those hoses ?

  • @reggierobinson3023
    @reggierobinson3023 5 років тому +4

    Mann I f**k with your videos you be on point with everything info , details . All dat .. I be feeling like a whole mechanic lol I changed my headlight lens covers on my e46 wagon from watching your video.. by chance u got any info on what might be the best fuel injectors to get on a 2001 325xi

  • @RashawMusic
    @RashawMusic 2 роки тому

    You a savage fam thanks 🙏🏾

  • @whitedust696
    @whitedust696 4 роки тому

    Thank you

  • @theeroom
    @theeroom 4 роки тому

    Great guide,.. What size are the hose clamps?

  • @alejandroz2729
    @alejandroz2729 3 місяці тому

    Great video, I will do it today. Wish me luck :-)

  • @ryarbrough1000
    @ryarbrough1000 5 років тому +2

    I can tell you from experience that this job is not easy on your back!!! But thanks for your video it was a huge help!!!

    • @startingtech3900
      @startingtech3900 3 роки тому +2

      lol try changing the driveshaft center support bearing on a jack and jack stands! this is way easy!

  • @sandervdw1784
    @sandervdw1784 5 років тому +2

    Hey man, nice video. I'm gonna assume that this filter is appropriate for the 320ci as well as the engine (M54) is the same as the 323,325,... ?

  • @marcojunqeira3668
    @marcojunqeira3668 3 роки тому +1

    you the best

  • @garyhuart7042
    @garyhuart7042 4 роки тому

    Thankyou

  • @addisvillain
    @addisvillain 6 років тому +4

    Bavarian Autosport have nice kit for the hoses and clamps.

    • @adrianbarba8989
      @adrianbarba8989 4 роки тому +1

      rest in peace bav auto ):

    • @startingtech3900
      @startingtech3900 3 роки тому +2

      @@adrianbarba8989 they still sell their products on ecs tuning just closed the website and warehouse

  • @andresvalencia8336
    @andresvalencia8336 4 роки тому

    Buen video may saludos

  • @justintimeforbrownies5246
    @justintimeforbrownies5246 2 роки тому

    Got a glimpse of those headers though 🤫

  • @madfisherisme
    @madfisherisme Рік тому +1

    Thanks bro I'm doing this this morning on mine I ordered the one from autozone originally and they sent me the wrong one. It didn't have the built in fuel pressure regulator

  • @claudecarter2725
    @claudecarter2725 5 років тому

    Is the coupe preface lift gurl filter the same? As I'm looking it up online and I found a similar 1 to you 1 you used but only has 1 in take on each side and as I don't have a lift It's better if I have the part when I'm doing the job rather than jacking it just to check

  • @fretman09
    @fretman09 3 роки тому

    the video is great, but do you have the location of this filter? also do you have to remove fuel pressure to do this, and how?

  • @paulteran6924
    @paulteran6924 9 місяців тому

    This is one of the filters that I have to replace on my car.

  • @RandomPhill
    @RandomPhill 6 років тому +2

    Dude your videos are awesome. Helped me change out my transmission! This one on the other hand. I bought a new fuel pump from 'All Import Auto Parts' almost a year ago. I've been having this starting problem for a while now. Sometimes I have to crank the car a few times to start it and other times it just starts. No known vacuum leaks however, I haven't changed out my fuel filter. My question is, would a bad fuel filter cause starting problems? Mine is a 2002 325i almost 200k miles. It's like I can almost tell there's some issue right under my driver seat like the gas doesn't reach the injectors.

    • @RandomPhill
      @RandomPhill 6 років тому +1

      Fyi, it drives great! And doesn't die while running

    • @ShopLifeTV
      @ShopLifeTV  6 років тому +1

      Yes it sure can

  • @user-rr1jg3nn7u
    @user-rr1jg3nn7u 6 днів тому

    Could you make a video about the causes of the red oil light flashing at low speed when the engine heats up

  • @richardhill6327
    @richardhill6327 4 роки тому

    could the hoses be pinched off to minimise fuel loss? seemed like a lot could leak out if (like me) you're not too speedy with the spanners.

  • @angelaromine2949
    @angelaromine2949 5 років тому

    01 325xi wagon. Would the fuel filter regulator going bad or being clogged cause the car to sputter when the gas pedal is pushed and mellow out when pushed further down ? It idles fine and revs fine just does it when put into gear.

  • @thomas1622
    @thomas1622 5 років тому

    Hey my vw jetta 1.8t is running bad misfire on 1 and 4 change out maf map coils and plugs but it still misfire in 1and4 what do u think

  • @thehxndler1116
    @thehxndler1116 8 місяців тому

    Please am looking for sizes od the cover of the filter for my e46 330cd phase 2 -2003- .
    Thank u so much .

  • @jamesellis3846
    @jamesellis3846 2 роки тому +1

    Really appreciate your videos! What size clamps & hoses would be used for fuel delivery and return? I want to replace them all if filter is replaced. Thanks! 👍

    • @LeverPhile
      @LeverPhile Рік тому

      8 mm fuel injection hose, 3 mm vacuum hose

  • @farktm8451
    @farktm8451 4 роки тому

    does it matter if the rear 2 hoses were put on a specific way? am getting no fuel at my schrader valve and wondered if i have maybe connected it the wrong way

  • @hugog2122
    @hugog2122 3 роки тому

    Where does the vacuum line hook up to if it’s not on the intake boot?

  • @benliu2376
    @benliu2376 6 місяців тому

    What specification is for the vacuum line hose? Does it have to be gasoline resistance? What about psi, as far as the pressure is concerned. In addition, its internal diameter, the thickness of the outer line? Thank you.

  • @AbdiK
    @AbdiK 4 роки тому

    I have a 2001 E46, I dont have any error lights on the dashboard, but when is a good time to change the fuel filter, or should I be even changing it for tune up purposes?

  • @harryhwang8463
    @harryhwang8463 5 років тому +1

    what happens when you switch return hose and main fuel line from the back of the fuel filter?

  • @beastboy642
    @beastboy642 11 місяців тому

    i have a 99 323i and my fuel filter only has one inlet and outlet. is the arrow supposed to be pointing towards the front of the car or the rear.

  • @jakofall79
    @jakofall79 2 роки тому

    What size are the 2 end bolts on the fuel filter cover

  • @PuffnOnPiff
    @PuffnOnPiff 3 роки тому +1

    Could you drain the fuel tank by disconnecting the filter and set the car to ignition?

  • @mcdazli4909
    @mcdazli4909 4 роки тому

    Hi sir. What saiz socket to open the oil filter?

  • @TYMCFLYexclusives
    @TYMCFLYexclusives 5 років тому

    what size should the new fuel clamps be?

  • @bimmerDallasBikersUnitedDBUCan
    @bimmerDallasBikersUnitedDBUCan 2 роки тому

    I need some Intel. I went to lookT a 06 530i. Started uo fine ran great. I floored it and it took off like it should then I came to a stop and when I floored it it didn't want to fully respond and the transmission light started to blink. I pulled over and turned the car off and back on and imdid it once more and it took off again then like it was not fully responding again any tips on this?

  • @kylenaidoovlogs3398
    @kylenaidoovlogs3398 4 роки тому

    My e46 320d ran out of fuel.. Is it right if I'm saying I have to bleed the fuel system and if so how do i do I bleed the system?

  • @vogeltron9816
    @vogeltron9816 5 років тому +2

    Any reason you don't use pinch off pliers when doing this?

  • @TheBlackdragon936
    @TheBlackdragon936 4 роки тому

    I’m surprised you didn’t pull the 54 fuse first or drain the line by pulling the fuse first and then trying to start the car in position 2.

  • @abolfazlm964
    @abolfazlm964 2 роки тому +1

    Is that vacuum hose 3 mm or 3.5 mm? Because In another video it says 3.5

  • @lilkloud
    @lilkloud 2 роки тому

    These dudes need to work at a BMW shop the accuracy is scary 💯

  • @DemonSlayer-df4ym
    @DemonSlayer-df4ym 4 роки тому

    Did this on my 2001 325i ...Right After I ran OBD2 and it threw a code...P0457 or Evaporative Emission System Leak Detected (fuel cap loose/off)....even more .....OBD2 Code P0457 BMW definition:
    A fuel tank pressure change less than a minus (-) 7 inches of water in 30 seconds has occurred after refueling; or there is excessive purge (fuel vapor) flow greater than 0.06 pounds per minute...... ShopLifeTV any advice....I cleared the code and am crossing my fingers...There were no visable leaks upon inspection after FF replacement...Changed Hoses and Clamps too

  • @maeu59
    @maeu59 5 років тому

    How can we be sure it’s the fuel filter? My car wouldn’t start, just kept cranking, I sprayed starter fluid in the intake and it started right up. Can I be positive it’s the fuel filter? It’s a 2005 330ci with only 30,000 miles.

  • @recon888
    @recon888 Рік тому

    What size are the fuel line hoses?

  • @frankm.1709
    @frankm.1709 3 роки тому

    I have a E46 and 03 shut down going down the highway acted like it was running out of fuel took the fuel filter out of the gas tank plugged it in stuck it back in the tank turn the key on shot fuel out seem to be a lot of fuel seem to be okay put it back together car I still don't run any suggestions

  • @samblanco5434
    @samblanco5434 Рік тому

    Does the bmw 08 650i have a fuel filter as well ? E63

  • @D3rbedeul
    @D3rbedeul 4 роки тому

    I have new battery , engine crank but won't start , not even from warm , only push and second gear , and then everything runs fine , i get no errors on dash , i check all fuses and relays on passenger side they all work , i can hear pump run when i put ignition on , can fuel filter be problem ? bmw e46 320d 150hp

  • @_BETTER_THINGS
    @_BETTER_THINGS 3 роки тому

    How do you get those two nuts off the back? They don’t fit the same 8mm socket used for the others.

  • @Lippert2010
    @Lippert2010 5 років тому

    @ShopLifeTV both of the big holes under backseat are they both fuel pumps

    • @bayouboys7654
      @bayouboys7654 5 років тому +1

      Leonard Lippert no theyre not one on the passenger side is fuel pump while the other makes sure the fuel is leveled

  • @beng.6417
    @beng.6417 6 років тому +3

    Looks sooooooo easy with a lift. I did this in my garage without a lift and was a pain in the butt. I couldn't get proper leverage and my hand slipped. I ended up with a huge gash on my right hand.

    • @mister.c4631
      @mister.c4631 3 роки тому +2

      If I could get my 46 that high I’d be under it every weekend! I know nothing about cars but I’m very practical

    • @edkalsbeek1765
      @edkalsbeek1765 3 роки тому +1

      @@mister.c4631 buy a Floor jack. 19 inches off the floor using jack and stands

  • @LS17EAGLE
    @LS17EAGLE 2 роки тому

    Is this the Pierburg fuel pump 7.28217.00 in front of filter?

  • @erhancakan5362
    @erhancakan5362 Рік тому

    Hello master, my car bmw e46 320d previously canceled the diesel filter of my car and currently the car is running without a diesel filter.I want to install a diesel filter in my car again, how can we do it

  • @howlingmedia4354
    @howlingmedia4354 Рік тому

    I, changed my recently , and now I ain't getting fuel to the engine. What happen do you think?

  • @Dougarony
    @Dougarony 4 роки тому

    Would the vent hose coming off cause loping idle & some stalling? Anyone?

  • @thejokerking952
    @thejokerking952 9 місяців тому

    i have a 2006 bmw 325xi awd when my car is warm i am driving it and it stall out help

  • @user-rr1jg3nn7u
    @user-rr1jg3nn7u 6 днів тому

    A friend had the oil light flashing and the problem was a broken air hose that goes to the fuel filter which causes a vacuum and the whole system is messed up.

  • @walterhernandez9112
    @walterhernandez9112 4 роки тому

    I deleted my pcv valve on my BMW 330xi 2003 I using an oil can catch now my car won't work and when I get it to start it keeps accelerating and the scanner show memory module foult.

  • @jamesleejr72
    @jamesleejr72 3 роки тому

    What type of fuel does a 2004 bmw 330xi take?

  • @BrianJ.
    @BrianJ. 3 роки тому

    I juest went to check under my car and there are 2 separate filters under the car. a smaller one and then another right after it.

  • @quammedadon9732
    @quammedadon9732 3 роки тому

    Where do I order the part from

  • @mannyfuentes217
    @mannyfuentes217 5 років тому

    Have you come across core p0172 p0175 and p1448 I ha EA those three and I've replaced some vacuum lines but I'm getting close to spending real money and would like to have an idea of where to start..

  • @ivaylohristov6058
    @ivaylohristov6058 4 роки тому +1

    Hello, can you tell me please what is the purpose of that foam because my mechanic didnt put it back in.
    Thank you in advance!

    • @mister.c4631
      @mister.c4631 3 роки тому

      Stop anything rattling around & cushion the parts off the body.

  • @nadyalmsry2337
    @nadyalmsry2337 5 років тому

    جميل جدا

  • @bonganirectorngobeni2575
    @bonganirectorngobeni2575 4 роки тому

    hi please help me my E46 320d its crank but no start,i got hit the pavement and broke diesel filter i did replace it its crank but no start,please help

  • @Sir-Kay
    @Sir-Kay Рік тому

    How do you know the right orientation? I know it's marked with an arrow but, how do I know which one of the 2 hoses on the other end goes to which pipe on the back of the filter?

    • @Unavalivle
      @Unavalivle 8 місяців тому

      they're different sizes