Solidworks tutorial | sketch mouse in Solidworks (Advanced Surfacing)

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 175

  • @simontillema5599
    @simontillema5599 6 років тому +144

    Amazing. I built it, editted it a little bit, 3D-printed it, added electronics from an old broken mouse, and now your design is functional. Well done!

  • @rogerioeduardo2874
    @rogerioeduardo2874 Рік тому +3

    Hello! I'm in Brazil and I drew the mouse here, it took me a while but it turned out good, it was a good lesson! Thanks for sharing your knowledge!

  • @bpetnoi1472
    @bpetnoi1472 4 роки тому +6

    OK I have been doing regular SolidWorks drawings for nearly 3 years. I just watched 56 minutes of this man drawing a very well done mouse. After 3 minutes I was totally lost. It was as though he was using a totally different program. Not sure I will ever get this surface concept down in any manner which makes sense.

  • @abueno6335
    @abueno6335 3 роки тому +15

    Thank you for your good intentions and very clear instructions. Please review your work and notice that you are overly complicating this task. First, by the (extreme) overuse of fully defined splines which can be achieved by making boundaries using Projected Curves instead and also efficient using Add Loft Section to a surface. Within your method, you could copy existing sketches and redefine these instead of doing everything from scratch again. You can create a single top surface and project your curves to create cuts and split curves rather than managing so many individual surfaces that you later have to knit... All of which will save much time, reduce complexity and unlock more power from the available tools. Good work overall in showing explicit controls on the splines.

    • @x1mjp1x
      @x1mjp1x 2 роки тому

      Agreed. This was WAY too many steps. I see there is a theme of OVER-defining in these video tutorials as well.

    • @phoneindustrydesign
      @phoneindustrydesign 7 місяців тому

      first off all this is my tutorial and these guys have just copied my work
      second, every single surface in this tutorial has to be built in this way in order to achieve precise look, if you want to only model a mouse without achieving great and price look like on the original product you can do whatever you like but the way I did is right

  • @x1mjp1x
    @x1mjp1x 2 роки тому +5

    @30.00 it would be helpful to hear why those settings under Boundary Surface are being selected and how they impact the results. At the moment, these seems like a very long way around to making this mouse.

  • @sherathiyaraj9258
    @sherathiyaraj9258 3 роки тому +2

    When my mouse is almost done. I have trimmed main sketch instead of converted entity and after doing couple of Undoing and redoing I got meshed up and now I'm on the starting phase of mouse 😅 but TUTORIAL IS GREAT I MUST SAY ♥️

  • @dhananjayroy
    @dhananjayroy 7 років тому +2

    Awesome tutorial. I did get stuck at one point but did go through after a bit of brain storming. Keep it up you are doing a good job.

  • @bdcarlitosway
    @bdcarlitosway 7 років тому +9

    Thank you for your tutorials!!! You are a saint, I am learning so much.

  • @davidrichards4591
    @davidrichards4591 4 роки тому +9

    Thanks for the video! It has been helpful as I am learning the advanced surfacing tools. FYI, the sketch relations "Coincident" and "Pierce" are different yet you used them interchangeably, and you often say to use one relation while using the other.

  • @jerryogen3426
    @jerryogen3426 6 місяців тому

    Very Brilliant CAD specialist. If only you could in detail explain your steps. It would make the tutorials far better

  • @shyamkumarpatro9754
    @shyamkumarpatro9754 4 роки тому

    Thank you sir... Thank you very much... You don't know... But i have learnt a lot from your videos.... Thank you again

  • @Indonesia01ian
    @Indonesia01ian 3 роки тому +3

    Hi, I am new in surfacing
    what happens if we don't do the extrude in 6:15? what is the difference if we click the bottom and the upper part then use the line as a guide rail?
    thanks

  • @Movieman1965
    @Movieman1965 3 роки тому

    Now people can see why mice cost a lot of money! Hahaha! It's a lot of work to surface model a mouse! Great tutorial.

  • @nicolascg8053
    @nicolascg8053 7 місяців тому

    Extraordinary work!!

  • @abhisheksukka4
    @abhisheksukka4 2 місяці тому

    Can you clarify how the tangent length impacts the modelling? Down the line my doubt is how to deduce the tangent length for any particular modelling?

  • @ronakadesara120
    @ronakadesara120 5 років тому

    Sir hum kisi bhi assembly ko resize kar sakte he? Yani ki all dimensions change kar sakte he ?

  • @abdalkaderalnazer
    @abdalkaderalnazer 8 років тому +2

    thank you man
    we need more tips and tricks about surfacing
    thanxxx

  • @FadDog-dy9kc
    @FadDog-dy9kc 6 місяців тому

    Keep going ❤

  • @TheMisleduser
    @TheMisleduser 6 років тому +5

    Thank you sir. Awesome instructions

  • @TNPTVconnect
    @TNPTVconnect 5 місяців тому

    Excellent tutorial! Thank you!

  • @tarikr5853
    @tarikr5853 10 місяців тому

    Brilliant! thank you very much

  • @vineethganji2496
    @vineethganji2496 4 роки тому +2

    where do you get these dimensions from or blueprints?

    • @HearsH96
      @HearsH96 3 роки тому

      Searching for same here

  • @siddharthupadhyay4246
    @siddharthupadhyay4246 3 роки тому +1

    Amazing lessons sir!! Thank you so much.

  • @miteshgandhi480
    @miteshgandhi480 4 роки тому +1

    i dont understand when making boundary surface which edges to select for direction 1 and which for direction 2

  • @ciaranaitken6520
    @ciaranaitken6520 7 років тому +2

    jeeeeeeeeee wiz thats one goooooood vid, gud job maaaaaaaaan

  • @nitida
    @nitida 4 роки тому +1

    Thank you again! I think you could do a intersection curve At 7:20

  • @TheENDAmac
    @TheENDAmac 7 років тому +2

    Hi thanks , how do you get the reflection hdri o surface in sketching mode ? .. thanks for great tutorial

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 років тому +1

      Thanks, you need professional graphics card in your system like Nvidia Quadro series or AMD firpro Series. other cards will not support real views.

    • @ctcians10
      @ctcians10 5 років тому

      If graphic card not supported, just add it in Registry Key.
      Type REGEDIT in Search Program and Files box
      LOCATE UR GRAPHIC CARD NAME AND MODEL
      1. HKEY_CURRENT_USER\Software\Solidworks\SOLIDWORKS2016\Performance\Graphics\Hardware\Current - on the right pane double click RENDERER (copy the video card's name} sample : AMD Radeon HD 8470D
      Adding Graphic Card to Gl2Shaders
      2. HKEY_CURRENT_USER\Software\Solidworks\SOLIDWORKS2016\Performance\Graphics\Hardware\Gl2Shaders\ (locate your graphics card in the list if available or add it under OTHER folder
      Right click Other+New+Key and rename the folder of the name of your Vcard
      Right Click your Vcard Folder name+New+DWORD 32bit value and enter this value 40008 or 40408 or 30408 or 60408 or 60008 (for me 60008 is working)
      3. Restart solidworks app (if not work, repeat process and change the value.
      Also try to put it in the correct Graphic card folder (for me I put it under R420 folder because it's a RADEON VCARD

  • @ctcians10
    @ctcians10 5 років тому +1

    Thank you for your tuts, i'm learning so much.

  • @josebordes8829
    @josebordes8829 7 років тому +2

    Thanks for this very interesting tutorial. Do you thing this piece can
    be done without surfacing tools? I mean, with these complex curves,
    could I do this mouse as a solid or it would be too difficult?

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 років тому +3

      if you will go for solid modelling , difficult to create such type of curves, up & downs,

    • @josebordes8829
      @josebordes8829 7 років тому +1

      You are right, thanks! Keep doing such a good tutorias ;)

    • @phoneindustrydesign
      @phoneindustrydesign 7 років тому +1

      thanks Jose, it's actually a complete copy of tutorial I did. I am glad you like it! :)

    • @eoinstevenson5340
      @eoinstevenson5340 7 років тому +2

      nice?!?!?!?!?!

  • @kandasamyrajan
    @kandasamyrajan 7 років тому

    Please explain what is meant by 105. Time 1.28
    Clear explanation is much appreciated because I am unable to move beyond this point. It is said that it is handle length of the spline. What bearing it has with a defining of a spline.

  • @บัญญวัตวงค์ปินะ

    สอบถามหน่อยครับ เราสามารถ ย้ายงานไปไว้ที่ แกน x0 y0 z0 ได้มั้ยครับ ถ้าเซฟจากไฟล์สเต็ปมาน่ะครับ

  • @ajayantuvan8199
    @ajayantuvan8199 3 роки тому

    Are all these dimensions calculated or assumed

  • @jededmonds7624
    @jededmonds7624 3 роки тому

    Thanks - very helpful tutoial

  • @Sabertooth93
    @Sabertooth93 3 роки тому

    When i choose normal to profile (as mentioned in the video @36:22), it gives me an error? Any solutions ?

  • @MuttakiNL
    @MuttakiNL 7 років тому +4

    I get error when thickening the knitted surface at the top of the mouse. I drew all of it twice from the beginning but got the same error. I think the problem is about the surface at the corner but I coulnd't find a way to fix it. It allows me to thicken 0.10mm but not 0.50mm as you did in the video. I would really appreciate your help for me to understand the problem.And thanks a lot for the video.

    • @ananyajain5837
      @ananyajain5837 6 років тому

      Hey, I am facing the same issue

    • @GeoXJimmi
      @GeoXJimmi 2 роки тому

      Having the same issue here...

    • @ganeshvaranletchumanan133
      @ganeshvaranletchumanan133 2 роки тому

      Yea facing the same issue here. Please do reply if anyone has found a solution. Thanks !

  • @trinh4784
    @trinh4784 2 роки тому

    1:36 Dimensions of spline : 130, 105, 115. what is this? Plz clear it for me?

  • @ranjeetahardi6669
    @ranjeetahardi6669 6 років тому

    Very thank full to you sir ...U r simply awesome.. thanks for the tutorial.

  • @BobQuagmireValens
    @BobQuagmireValens Місяць тому

    This looks similar to DM Masterdesigners mouse. However. He added a sensor at the bottom of his design. Different approach in similar fashion.

  • @muiscabacata
    @muiscabacata 7 років тому +1

    is it possible to make an explosion?

  • @evgenianarizh7233
    @evgenianarizh7233 4 роки тому +1

    Absolutely great job! Thank you very much! I learned a lot fron this interesting tutorial.

  • @wenweigan8043
    @wenweigan8043 8 років тому

    Helloo, do u have the design for separate parts for assembly ? And do u have any ideas to design the jig or fixture for your mouse? Thanks

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  8 років тому +1

      this is created with the help of surfacing tools in Solidworks & its a single par only.

  • @Aman-wy6sj
    @Aman-wy6sj 5 років тому

    Sir could you tell me, how you are giving exact specific dimensions like exact angles, lengths etc.
    I mean how to consider what extent of dimension is most suitable..

  • @origami_canoe1952
    @origami_canoe1952 3 роки тому

    Thank you! This was very educating

  • @joonykids
    @joonykids 5 років тому

    Simply Awesome!

  • @amorimtexas
    @amorimtexas 7 років тому +1

    excelent job! thanks and congratulations!

  • @ilustradsn
    @ilustradsn 3 роки тому

    Is there a easier way to start ? ( not with spline) thank you

  • @amorimtexas
    @amorimtexas 7 років тому +2

    Congratulations!
    I would like to work as a freelancer ..... at home .... is it possible?

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 років тому

      try with freelancing websites & fiverr, even you can sell your 3D models in turbosquid.com

  • @jonathona4032
    @jonathona4032 7 років тому +3

    Every time I try to tangent the 2 splines I get a Over Defined error :c

  • @Manufacturing5.0
    @Manufacturing5.0 4 роки тому

    How did you fix the error at 12:05?

  • @arsenbassenov1290
    @arsenbassenov1290 7 років тому

    Thank you very much! However, for some reason my trim surface is always greyed out. What should I do?

    • @HearsH96
      @HearsH96 3 роки тому

      Ensure you have converted the sketch entities, maybe that’ll help

  • @madhusudhanar1137
    @madhusudhanar1137 6 років тому +1

    I can't able to make vertical in the beginning of spline

  • @tiagolopes7802
    @tiagolopes7802 4 роки тому

    I have a challenge for you... can you model the mouse logitech anywhere 2s? Please, make a tutorial.

  • @uniqueperspective7156
    @uniqueperspective7156 5 років тому

    Great work sir, thank you

  • @joseluisgomezruyter2108
    @joseluisgomezruyter2108 4 роки тому

    Hi how did you get that shiny look at component level?

    • @indulahemachandra5717
      @indulahemachandra5717 Рік тому

      RealView graphics - search how to enable realview graphics in Solidworks

  • @vadikvvadikson111
    @vadikvvadikson111 4 роки тому

    thank you very much for your lesson

  • @因特-o7h
    @因特-o7h Рік тому

    can someone tell me why does he keep the extra boundary surface hiding and does not delete these at last?

  • @subratadutta7710
    @subratadutta7710 3 роки тому

    Sir, where do you get those dimensions? Btw the video is amazing

    • @grovkillen1
      @grovkillen1 3 роки тому

      He's making them up. I don't know why he's obsessed with using fractions of a millimeter though, it just makes it harder to follow. And I find it very easy to break the model using so many dimensions connected to the origio. Use relative dimensions instead makes it more dynamic.

  • @mathewlong9531
    @mathewlong9531 7 років тому +10

    thnx bb

  • @ngangoumlove
    @ngangoumlove 7 років тому

    thanks Sir,
    but please how can i get some shiny image by modeling like yours??

  • @trinh4784
    @trinh4784 2 роки тому

    25:21 I can'i choose the midle edge in the direction 2. Oh my God.

  • @patrickmcgowan8380
    @patrickmcgowan8380 7 років тому

    What mouse was this tutorial based off of?

    • @facetious1728
      @facetious1728 7 років тому +1

      based on your name my guess is that you're also on that LC DCG cram

  • @PauloSergioDiasCarmo
    @PauloSergioDiasCarmo 5 років тому

    Hello friend, where do I find the channel's CAM videos?

    • @HearsH96
      @HearsH96 3 роки тому

      Click on the channel thumbnail and it’ll take to the home page page of the channel. You can all their playlists and videos there, including videos on CAM

  • @lukefitzsimons9473
    @lukefitzsimons9473 2 роки тому

    Is this a logitech m235

  • @adhishpv6315
    @adhishpv6315 4 роки тому

    I am getting an unwanted, irregular hole, when I try to thicken surface can u help me

  • @nileshmishra5517
    @nileshmishra5517 5 років тому

    Can you make a sandals...!!!

  • @akashvyas7715
    @akashvyas7715 8 років тому +2

    sir,can you make some more tutorials on surfacing.
    thankyou

  • @pushkardhamane1508
    @pushkardhamane1508 6 років тому

    Some error is coming(31:40) while selecting direction 2,pls help

    • @adityachangal
      @adityachangal Рік тому

      Same error did u found 😅
      It was 5 year ago for u I know but still if u remember anything?

  • @PUNISHERMARKO
    @PUNISHERMARKO 8 років тому +1

    Awesome. Very nice :)

  • @jaymistry5504
    @jaymistry5504 5 років тому

    Why is your solid body so clear??

  • @akhilanand6546
    @akhilanand6546 3 роки тому

    how do i clear the error for selecting the guide curve ???

  • @vinitfirke2201
    @vinitfirke2201 3 роки тому

    Showing error at 27:31 need help please.

  • @AkashChavan-lu8kr
    @AkashChavan-lu8kr 4 роки тому +1

    Sir pls provide drawings of these project.

  • @dcrdcrnkl1
    @dcrdcrnkl1 7 років тому +1

    Thanks for the tutorial

  • @scottymadden99
    @scottymadden99 7 років тому

    What mouse is this

  • @malkalbt6416
    @malkalbt6416 8 років тому +1

    The question is how you got the dimensions ?

    • @phoneindustrydesign
      @phoneindustrydesign 8 років тому +7

      the answer is - he copied my tutorial and the way I got the dimensions is by measuring the mouse I have and also following some base dimensions shown on the official Logitech website :)

  • @jakubdemolay1336
    @jakubdemolay1336 7 років тому +2

    Sir, I don't have those manouvreable arrows by the spline...Can you help me, please?

    • @jamescuevas7080
      @jamescuevas7080 5 років тому

      Tools - Options - System Options - Check "Enable spline tangency and curvature handles"

  • @thishanberstin7764
    @thishanberstin7764 8 років тому +1

    nice man

  • @MultiMertkan
    @MultiMertkan 7 років тому +1

    excellent.

  • @resultalo6915
    @resultalo6915 3 роки тому

    thank you very much

  • @luisbolanos954
    @luisbolanos954 5 років тому

    Great work thanks :)

  • @zaiddoor6721
    @zaiddoor6721 4 роки тому

    Good

  • @MrFjho
    @MrFjho 4 роки тому

    Thank you bro!

  • @cityblue7029
    @cityblue7029 5 років тому

    at 4.50 why can't I select anything to remove? pls help

  • @santiagorodriguezgarcia6803
    @santiagorodriguezgarcia6803 7 років тому

    the "Thicken" tool is not in my solidworks, what can I do ?????? please

  • @disfuncionexe
    @disfuncionexe 2 роки тому

    I am making a mouse body for my solid works final. thanks for the tutorial on how to make the curved faces

  • @ubeyde_krc
    @ubeyde_krc 4 роки тому

    I subscribe to your channel.

  • @md.nahidsarker5111
    @md.nahidsarker5111 3 роки тому

    Excelent tutorial but difficult to me.

  • @ctcians10
    @ctcians10 5 років тому

    Please help, give me sample how to create Eggtray (material-pulp)

  • @ubeyde_krc
    @ubeyde_krc 4 роки тому

    you are perfect

  • @VADIMAKE
    @VADIMAKE 4 роки тому

    i don't get why you make 2 peaces of that surface on the side at 35 min , why not 1 peace?

  • @mmaad2165
    @mmaad2165 4 роки тому

    anyone here know how to find the steps he did to make anything else???
    this is the real tutorial

  • @surojkarmakar4213
    @surojkarmakar4213 Рік тому

    Sir mouse ka sketch!!!??

  • @parthagaming4164
    @parthagaming4164 Рік тому

    Wow

  • @RKfamily1901
    @RKfamily1901 3 роки тому

    Other method ilaya

  • @johanndaveldebeer9532
    @johanndaveldebeer9532 7 років тому +1

    You should make this cahnnels name IDs Dime to Define

  • @luisedery4547
    @luisedery4547 7 років тому +1

    Please, e-mail me back and explain to me what the numbers 105, 115 and 130 mean?

  • @harshdarji4413
    @harshdarji4413 8 років тому

    sir can u send me the download link of SOLIDWORKS 2016?

  • @soumadipsasmlsasmal1304
    @soumadipsasmlsasmal1304 6 років тому +1

    Dear sir,
    Solidcam tutorial ke bare me kuch details digie Hindi version me ek alag si folder create karke; please sir, please sir, please sir.
    Details explain solidcam in hindi version create new folder.
    Please sir, Please sir, Please sir, please, please, please.

  • @muhammadafifhidayat2566
    @muhammadafifhidayat2566 4 роки тому +1

    helo sir, can u make this tutorial again with more efficient method ? i believe there is more efficient method than this

  • @anika6248
    @anika6248 4 роки тому

    Sir App bs drow Kr rahye h
    Kuch samajh nahi aaraha h
    Kya Ho raha h....?.., kyu Kr rahye h.?....thoda explain bhi krye