I'm sorry to laugh at your frustration, rewound and watched the " stripped out and the wrong size" portion several times. Hilarious, prefect example of why I've always tried to do my own work- and have passed that on to my kids. Headed to Indy next weekend for the race, love your videos.
Thanks for the vid. I like when you mention a mistake when you make one. Everything going perfectly in the real wold is not honest reality . Had my 2014 Q5 in to AUDI today on two recall notices and they called me to get the o.k. to change my front wipers for$250.00. NOT !
Wow .. I had a GF that had her Jetta MkV pan stripped out dude must have used a 1/2” breaker bar and crossed threaded it.. yep it was a quickie lube place.. I noticed it after seeing a puddle in the driveway next day.. I totally relate dude .. but I like how you engineered that thread job on the pan 👍🏻
HEY BUD NEED HELP BAD! WHAT ALL DID YOU LOOSEN TO GET THE PAN OFF? ALL THE SUB FRAME BOLTS? TRANS AND MOTOR MOUNTS? Didn't see that information before you started. Thanks.
I got a 2009 A3 8p with a ticking 2.0 tfsi! Sounds like it's coming from the top of the motor.. it also makes a "clocking" sound on cold start! I just got it started today after replacing the rear main oil seal! Any advise?
Hey naptown, thanks for the knowledge. I'm having a oil pressure problem, at 10 psi at idle. Sensors check out, just replaced the timing chain and pvc. I went from a white top to black if that matters but idk if the balance shafts or pump should be replaced. Any input would be very appreciated. Keep it up!
Love your vids man. You’ve helped me a ton! Maybe a dumb question, but what is a “short wobble” extension? I’ve tried searching online to no avail. And did you hoist the engine to this? I’m trying to drop the pan without having to do that. I’ve got all but 1 if the pan bolts out.
Man do you handle yourself good when shit like that drain plug happens....Cause wow would have I exploded and probably would have regretted it, but it would have felt amazing 😂😂. Good on you bro
I felt that frustration about the jiffy lube plug, authentic, naptown tuner has heart. that's why i look for a naptown tuner vid first when looking for help with my TSI.
WILL YOU DO A VIDEO ON ALL THE COOL CASES OF TOOLS U GOT STACKED UP BEHIND U IN UR SHOP IN SOME PREVIOUS VIDEOS? I DEFINITELY WANT TO HAVE THE RIGHT TOOLS- NAPTOWNS TUNERS PREFERENCE- &THE WHO WHATS WHERE AND HOW ABOUT THE PRODUCTS... THANKS J!
Yes I second this comment nap put a video together for the most used Audi/VW tools and what you use.. you are the best out there.. only trust your choices
So far my tool videos haven’t done very well. When I do a repair I’ll take about them as I use them.. Thanks for the interest and I will keep it in mind.
My audi it is not starting and it’s flashing the hazards lights,I changed the oil pump but still it is not starting,AUDI A4 B7 2006 BRE engine,what could be a problem?
Someone messed up my drain plug threads in the pan before I bought the car, id never go to an oil change place. It always leaked oil with a new plug so I had to use pipethread tape. Works good. I might buy an oil sucker thingy to change my oil that way.
I use an oil extractor on mine and it works great. I was doubtful about it getting all the oil out. But when you put the extractor tube down the dipstick tube until it stops it evidently goes to the lowest point in the pan. Takes 5L to fill it back up every time. I recommend checking the magnetic drain plug for metal at least once a year.
I know this is old but you could also try a stahlbus. Whoever worked on it before I bought it actually broke a chunk of thread. Not stripped but literally chipped off a piece. Some pipe dope and one of those paper type washers and I just hook a hose to it.
Is it the same thing with the 2.0 Tdi and how can you test if the oil pump is working on a a4 b8 2.0 tdi . I really need an advice if you respond to me thank you very much man🙏
Yo where are you located I have a 2012 a4 that I am going to be putting a k04 in and want to build the internals and would love for you to be the one who works on it! For ur videos
I have a b8 a4 2.0 and my low oil pressure light keeps coming on I had a leak from my lower timing cover that I recently fixed but my low oil pressure light still comes on. Could it be the pump?
Am I'm correct in assuming there's no way to get the oil pan off without lifting the engine?? I'm a diyer and my pan is leaking from what seems to be around the gasket.
Hi bro I wish you're OK. I have an audi Q5 2010 2.0 TDI with 177Hp recently I experienced auxiliary water pump expload. I bought a new one and I replaced it then when I Run with the Car for few minutes I saw smoke goes out from the engine i checked it saw the new Aux water pump also exploded and coolant leaks out. I took the car to someone he checked the coolant circuit and it was OK. Pleas I would to know where could be the Problem.
I never got to work on that engine very often, not many out there and most were reliable. I would try to figure out if it’s a known parts failure because that does not sound the least bit normal
@@NaptownTuner thnx bro I wish u could help me figuring out what could be the Problem if possible. i saw in the forum that this part is weak its made of plastic
A new pump costs over $300 and it’s probably like 3hrs labor I don’t know off the top of my head, someone with all data or still working at a shop might know. I would quote 3hrs just for the pump r&r without diag
I get a low oil pressure warning on my Audi A4 b8 2012. It comes on after about half an hour of driving. And it only comes on at idling speed. When I Car is driving it goes away. But the more I drive, the more sensitive it becomes. Could oil pump be the case? It has a new camshaft bridge. I may need to replace the whole PCV valve, not just the center part. Anyone else has this same issue? Thanks
@@Therey1898 nooo, still dealing with it, took it to a few mechanics and they haven’t figured it out. And Audi dealer is charging me at least $6500 or more depending on what they find. I am tired! Want to get rid of this car! Anyways, I think it may be the oil pump, but then again it could be like 20 different things. Replaced the PCV and car runs a bit better.
@@JoseStudios man i feel you bro i have a Q7 ever since i bough it i 2017 i have spend bout 4k on it already n now this oil pressure light smh i got the oil pump hopefully that will fix it but idk no more tired of it already every mechanic gives me different prices always more than $1k probably going to end up sending to junk yard lol fuck that
Thats not Audi Q5. or at least the Q5 2010 I am working on first before sump can come out you must remove the anti roll bar. Then the steering rack. Oh but first remove the STEEL unforgiving hydraulic lines from the steering rack which likely means moving something else so you can remove those lines. Then the torsion bar which is an insane job. I got all 23 bolts out my customers sump and even with meter long pry bar, the sump wont fall more than 8mm on front or twist to sides more than 5mm each way. Suggesting something inside has wedged itself against the inner side of the sump. Your easy sump removal, is for sure not what this Audi of mine is like.
No just an old vintage hat, I got one when I was 19 in Costa Mesa, California good will, lost it on my motorcycle shortly after that.. then found another one recently on eBay for nostalgia‘s sake
some guys take the car apart, and my guy naptown just changes the part. Very informative and done like a pro as per usual.
Best video about the oil pump removal in youtube. Cool J
Awesome to show this in the car. I just did this laying on my back and it was a pain. You make it look much easier!
Cause he has a lift......
I'm sorry to laugh at your frustration, rewound and watched the " stripped out and the wrong size" portion several times. Hilarious, prefect example of why I've always tried to do my own work- and have passed that on to my kids. Headed to Indy next weekend for the race, love your videos.
Thanks for the vid. I like when you mention a mistake when you make one. Everything going perfectly in the real wold is not honest reality . Had my 2014 Q5 in to AUDI today on two recall notices and they called me to get the o.k. to change my front wipers for$250.00. NOT !
I appreciate the drama! Back to watching.
U STOPPED WATCHING?
@@newacount1777 I had to stop watching so that I could post a comment... then I went back to watching the rest of the video.
It's good to know the Audi 2.0T can last up to 240K. I wonder if my 2018 Q5 2.0t is more or less reliable than the previous ...
VIM torx stubbies are your best friend for working on audi/vw
noted!
If you continuously siphon don't you risk leaving all the particles in the pan being left inside the pan each time??
That's why you don't go to the Jiffy place. Good ole ram jam the oil pan bolt. Who does that. Naptown turner great word Ram Jam 🎸 👌
Wow .. I had a GF that had her Jetta MkV pan stripped out dude must have used a 1/2” breaker bar and crossed threaded it.. yep it was a quickie lube place.. I noticed it after seeing a puddle in the driveway next day.. I totally relate dude .. but I like how you engineered that thread job on the pan 👍🏻
HEY BUD NEED HELP BAD! WHAT ALL DID YOU LOOSEN TO GET THE PAN OFF? ALL THE SUB FRAME BOLTS? TRANS AND MOTOR MOUNTS? Didn't see that information before you started. Thanks.
Nothing. Did you even watch?
I hate Jiffy Lube. I always do my own oil changes in garage flat on my back. Buts it’s worth it because I know it was done right.
Where is part 2 ?
Hey don’t fart and waste it ,when you can burp and taste it 😂😂 my patient and I rewinded that part 3 times . It had use lmao
I wish the SHO had a real AWD setup. Ford really missed an opportunity with that car.
I got a 2009 A3 8p with a ticking 2.0 tfsi! Sounds like it's coming from the top of the motor.. it also makes a "clocking" sound on cold start! I just got it started today after replacing the rear main oil seal! Any advise?
Is B7 engines oil pump is also like yours?
Hey naptown, thanks for the knowledge. I'm having a oil pressure problem, at 10 psi at idle. Sensors check out, just replaced the timing chain and pvc. I went from a white top to black if that matters but idk if the balance shafts or pump should be replaced. Any input would be very appreciated. Keep it up!
Same boat here
Did you ever figured out what it was?
Did you solve the issue ??
It'd be lovely if people posted an update on the "fix"
I love your videos but I have a 2004 a4 Quattro all wheel drive 3.0. My sump pan. Is cracked and it’s connected to my engine any advice on removing it
Ypu should do a transmission fluid change on these cars
I will sometime soon
You rock man, love your videos
Love your vids man. You’ve helped me a ton! Maybe a dumb question, but what is a “short wobble” extension? I’ve tried searching online to no avail.
And did you hoist the engine to this? I’m trying to drop the pan without having to do that. I’ve got all but 1 if the pan bolts out.
Man do you handle yourself good when shit like that drain plug happens....Cause wow would have I exploded and probably would have regretted it, but it would have felt amazing 😂😂. Good on you bro
I felt that frustration about the jiffy lube plug, authentic, naptown tuner has heart. that's why i look for a naptown tuner vid first when looking for help with my TSI.
WILL YOU DO A VIDEO ON ALL THE COOL CASES OF TOOLS U GOT STACKED UP BEHIND U IN UR SHOP IN SOME PREVIOUS VIDEOS? I DEFINITELY WANT TO HAVE THE RIGHT TOOLS- NAPTOWNS TUNERS PREFERENCE- &THE WHO WHATS WHERE AND HOW ABOUT THE PRODUCTS... THANKS J!
Yes I second this comment nap put a video together for the most used Audi/VW tools and what you use.. you are the best out there.. only trust your choices
So far my tool videos haven’t done very well. When I do a repair I’ll take about them as I use them.. Thanks for the interest and I will keep it in mind.
23:00 "You dont want crude pushing though all your orifices" flashbacks of the fasting videos
Why not put oil pan gasket?
My audi it is not starting and it’s flashing the hazards lights,I changed the oil pump but still it is not starting,AUDI A4 B7 2006 BRE engine,what could be a problem?
That bolt your're threading in there is NOT stock Audi.
That job needs to be done with hand tools to prevent the stripping of those bolts upon reassembly
Someone messed up my drain plug threads in the pan before I bought the car, id never go to an oil change place. It always leaked oil with a new plug so I had to use pipethread tape. Works good. I might buy an oil sucker thingy to change my oil that way.
I use an oil extractor on mine and it works great. I was doubtful about it getting all the oil out. But when you put the extractor tube down the dipstick tube until it stops it evidently goes to the lowest point in the pan. Takes 5L to fill it back up every time. I recommend checking the magnetic drain plug for metal at least once a year.
I know this is old but you could also try a stahlbus. Whoever worked on it before I bought it actually broke a chunk of thread. Not stripped but literally chipped off a piece. Some pipe dope and one of those paper type washers and I just hook a hose to it.
Hi I’m driving Audi A4 1.8 b8 I use a lot of oil what course of that
You rock brother!
Is it the same thing with the 2.0 Tdi and how can you test if the oil pump is working on a a4 b8 2.0 tdi .
I really need an advice if you respond to me thank you very much man🙏
Yo where are you located I have a 2012 a4 that I am going to be putting a k04 in and want to build the internals and would love for you to be the one who works on it! For ur videos
You need one oif those flexible extensions. Im sure you probably have one somewhere.
If you’re talking about what I’m thinking, they are worthless in my opinion. I purchased one years ago and hate it
I have a b8 a4 2.0 and my low oil pressure light keeps coming on I had a leak from my lower timing cover that I recently fixed but my low oil pressure light still comes on. Could it be the pump?
Could be tons of things lol going through this now on a q5
Am I'm correct in assuming there's no way to get the oil pan off without lifting the engine?? I'm a diyer and my pan is leaking from what seems to be around the gasket.
Did you even watch? He just removed it without having to lift the engine.
❤
Awesome vid
What if I put cherry bombs to replace the mid second and remove the muffler with straight pipe how will that effect the engine??
Just keep the factory resonators and do muffler deletes if you want to do it that way. You’ll outgrow the excessive noise
Shop supplies!
Nice!
I have a question, I got a audi a4 engine and Im in need of another engine. What other engine can I use for my vehicle
I explain that in some of my older videos
Good man!
Hi bro I wish you're OK.
I have an audi Q5 2010 2.0 TDI with 177Hp recently I experienced auxiliary water pump expload.
I bought a new one and I replaced it then when I Run with the Car for few minutes I saw smoke goes out from the engine i checked it saw the new Aux water pump also exploded and coolant leaks out.
I took the car to someone he checked the coolant circuit and it was OK.
Pleas I would to know where could be the Problem.
I never got to work on that engine very often, not many out there and most were reliable. I would try to figure out if it’s a known parts failure because that does not sound the least bit normal
@@NaptownTuner thnx bro I wish u could help me figuring out what could be the Problem if possible.
i saw in the forum that this part is weak its made of plastic
I got 2012 a4 Quattro, oil pressure low and EPC light came on, have to give it gas to turn on sometimes. You think it can be the oil pump?
What was it?
@@seanh9869what audi do you have ?
@@Hey-zy1bz 09 audi a4 quattro
Is it possible to do pistons on these in the car ?
Upper oil pan won’t come off because rear crank flange bolts. Watch my engine removal videos
How much do you think changing a oil pump should cost? Naptown?
A new pump costs over $300 and it’s probably like 3hrs labor I don’t know off the top of my head, someone with all data or still working at a shop might know. I would quote 3hrs just for the pump r&r without diag
I get a low oil pressure warning on my Audi A4 b8 2012. It comes on after about half an hour of driving. And it only comes on at idling speed. When I
Car is driving it goes away. But the more I drive, the more sensitive it becomes. Could oil pump be the case? It has a new camshaft bridge. I may need to replace the whole PCV valve, not just the center part. Anyone else has this same issue? Thanks
Did you figured out what it was??
@@Therey1898 nooo, still dealing with it, took it to a few mechanics and they haven’t figured it out. And Audi dealer is charging me at least $6500 or more depending on what they find. I am tired! Want to get rid of this car! Anyways, I think it may be the oil pump, but then again it could be like 20 different things. Replaced the PCV and car runs a bit better.
@@JoseStudios man i feel you bro i have a Q7 ever since i bough it i 2017 i have spend bout 4k on it already n now this oil pressure light smh i got the oil pump hopefully that will fix it but idk no more tired of it already every mechanic gives me different prices always more than $1k probably going to end up sending to junk yard lol fuck that
@@Therey1898 did the oil pump fix it?? Or did you figure out what the issue was
@Therey1898 was it the pump?
Thats not Audi Q5. or at least the Q5 2010 I am working on first before sump can come out you must remove the anti roll bar. Then the steering rack. Oh but first remove the STEEL unforgiving hydraulic lines from the steering rack which likely means moving something else so you can remove those lines. Then the torsion bar which is an insane job. I got all 23 bolts out my customers sump and even with meter long pry bar, the sump wont fall more than 8mm on front or twist to sides more than 5mm each way. Suggesting something inside has wedged itself against the inner side of the sump.
Your easy sump removal, is for sure not what this Audi of mine is like.
Is that a Audi hat?
No just an old vintage hat, I got one when I was 19 in Costa Mesa, California good will, lost it on my motorcycle shortly after that.. then found another one recently on eBay for nostalgia‘s sake
Mickey Mouse job. That is the wrong bolt !!!
You can’t please create list you material you user please
Ill try to do better about showing the tools I use in the videos
@@NaptownTuner but you can’t put list description please
So sloppy
Hey nap on this video i can rightful so accuse you of being a parts changer here... an oil pump is not a cheap part to just change for assumption 😢
It's just for the "video"