Rough Turning Operation for CNC Lathe in Mastercam || Rough Turning ||

Mastercam in this Video we show u all about Rough Turning Operations in Details for CNC Lathe Machine
:- Mastercam for Beginners in Hindi: • Mastercam Basic Tutori...
:- Mastercam || CNC Lathe Tutorial || Facing || Rough Turning || Finish Turning || Centre Drill || Peck Drill ||: • Mastercam CNC Lathe Ex...
:- Link for Offset & Fillet:- • Mastercam Wireframe Ta...
:- Details about Toolpaths Managers:- • Mastercam Toolpaths Ma...
Be Connected we will Update on Mastercam in Hindi
#Rough Parameters.
Use this tab to create a Lathe Rough toolpath. Compared to other types of Lathe roughing toolpaths, this tab offers you the most complete set of roughing options.
#Entry amount
Enter the distance from the stock that the tool starts to feed.
#Exit amount
Specify the amount that the tool moves beyond the stock boundary at the end of a cut.
#Cutting Method
Choose a cutting method/direction from the drop-down menu.
#One way: The tool cuts the part in one direction, comes up, goes back to the beginning, and cuts again. The picture in the dialog box changes to show this tool motion.
#Rough direction/angle
Determines the angle that the tool cuts into the part. This angle is relative to the rough direction, OD, ID, Face, or Back.
#Equal steps
Removes the same amount of material per pass without exceeding the Depth of cut value.
#Depth of cut
Sets the amount of material to be removed during each cutting pass. This option is only available when Depth cuts are set to Equal steps or Auto. If Equal steps are selected, then this value determines the maximum amount of material the tool can remove per pass.
#Stock to leave in X
Determines how much stock remains in the X direction when the operation is finished. Typically, this would be removed by a separate finish operation.
#Stock to leave in Z
Determines how much stock remains in the Z direction when the operation is finished. Typically, this would be removed by a separate finish operation.
#Lead-in/out
Select to have Mastercam add lead-in/out moves to the toolpath. Click to edit the moves.
#Plunge parameters
Click to define how the tool handles undercut on the toolpath along each axis.
Be Connect we will upload about Mastercam in Hindi

[@hikmatjan54]

Good job

[@suyogg7]

How to define blank size and actually part

[@VirenderSinghBhati]

Feel free to text ou what's app [phone] for personal help and support

[@debuhalder4576]

How to download mastercam?

[@VirenderSinghBhati]

Thank you dear for supporting us

[@VirenderSinghBhati]

Dear contact us ...9983660675

[@vasimansari9070]

@@VirenderSinghBhati bhai knurling ka program kaise banaae plZ video banaao

[@mohitjagtap9600]

@@VirenderSinghBhati how to control retract amount in id turning