0:00 how to ruin the heat treat of your broken spade bit and turn it into the worst chisel imaginable. 0:19 how to turn a waste grate into a surprisingly functional paint mixer (but seriously just go buy a $5 mixer that has no sharp edges) 0:44 turn your bottle of chalk into a chalk line. Nowhere to store the chalky string later but I guess if you busted your actual chalk line on site this could get you out of trouble for a few hours. Not completely stupid. 1:05 use a PVC pipe cap, a bolt and some hot glue to build a really terrible sanding device to kind of scuff the surface of some steel. Seriously, buy a flap wheel for the grinder you used in the paint mixer section back at the start of the video. Thank me later. 1:44 cut up an offcut of steel RHS and use it as a terrible die to bend some thin sheet metal into a tacky looking thingamabob with no clear use. 2:12 use the wire handle from a bulldog clip to align two pieces of plasterboard instead of back-blocking them properly. Second stupidest thing in this video so far. 2:30 use an old pair of pliers as a mould to melt some lead into a neat lump on the end of a piece of cable. Don’t try this with your $80 professional pliers, you’ll ruin the heat treat. Not sure what this could be used for but I guess somebody could appreciate having a lump of lead on a bit of cable. 2:52 use a piece of steel tube and a string to create an automatic guy-rope tensioning lock that will probably cut your string the first time a bit of wind starts moving your tent around. Do it properly with a short piece of wood drilled out, carved and sanded to a nice finish. Don’t use rusty old steel pipe. 3:19 bend a bit of fencing wire into a surprisingly neat little loopy thing to hang on your clothesline. Purpose unclear, let’s move on. 3:49 use a drill and a bench vice to twist some wire. How exhilarating. 4:06 using a bit of bike chain and some bolts, build a tiny version of a pipe bender for bending fencing wire into cool shapes. Actually could be very handy for somebody who makes wire artwork. Good job. 4:28 remove a loose nail from the back of an MDF and particleboard cabinet and use a rivet to fasten the thin MDF sheeting back on. This idea is utterly terrible, what a complete waste of time. Move the nail along to a fresh spot and hammer it back in or better yet, replace the old nail with a screw that won’t easily come loose. Nails suck. This hack sucks. This video sucks. 4:37 use a drill and your bench vice to twist more fencing wire up and then use a hammer to flatten the twisted wire into a weird, flat, twisty bit of steel that belongs in the rubbish bin. What a horrific waste of everybody’s time. Put some effort into your videos.
а то,что этим куском наждачки в 5 см.кв он пытается что то зачищать? тебя не удивило? да еще на шуруповерте? так каждую минуту надо наждачку переклеивать будет.
@@ideal7067 а ты кто мне указывать,что сперва делать? Я свое мнение могу и буду высказывать когда захочу,без всяких "накидай видосиков". и хуй ты мне запретишь. еще вопросы?
Здрассссььь!!!
Доктора DIY инфаркт хватит при просмотре этой эпичной нарезки...
Надеюсь, он не наткнется на этот ролик... 😁
Только о нем подумал. Но это же и есть легендарный мистер сани🤣
Дядя Саня в своём репертуаре))
Это же очень полезные лайфхаченыши
Доктору нужен новый измерительный прибор для измерения "нахуя это надо?" - "Нахуяметр" единица измерения 1Сани.
Его "Кондратий" хватит вообще.
фокус с заклепкой в дсп непрокатит дсп разорвет
0:00 how to ruin the heat treat of your broken spade bit and turn it into the worst chisel imaginable.
0:19 how to turn a waste grate into a surprisingly functional paint mixer (but seriously just go buy a $5 mixer that has no sharp edges)
0:44 turn your bottle of chalk into a chalk line. Nowhere to store the chalky string later but I guess if you busted your actual chalk line on site this could get you out of trouble for a few hours. Not completely stupid.
1:05 use a PVC pipe cap, a bolt and some hot glue to build a really terrible sanding device to kind of scuff the surface of some steel. Seriously, buy a flap wheel for the grinder you used in the paint mixer section back at the start of the video. Thank me later.
1:44 cut up an offcut of steel RHS and use it as a terrible die to bend some thin sheet metal into a tacky looking thingamabob with no clear use.
2:12 use the wire handle from a bulldog clip to align two pieces of plasterboard instead of back-blocking them properly. Second stupidest thing in this video so far.
2:30 use an old pair of pliers as a mould to melt some lead into a neat lump on the end of a piece of cable. Don’t try this with your $80 professional pliers, you’ll ruin the heat treat. Not sure what this could be used for but I guess somebody could appreciate having a lump of lead on a bit of cable.
2:52 use a piece of steel tube and a string to create an automatic guy-rope tensioning lock that will probably cut your string the first time a bit of wind starts moving your tent around. Do it properly with a short piece of wood drilled out, carved and sanded to a nice finish. Don’t use rusty old steel pipe.
3:19 bend a bit of fencing wire into a surprisingly neat little loopy thing to hang on your clothesline. Purpose unclear, let’s move on.
3:49 use a drill and a bench vice to twist some wire. How exhilarating.
4:06 using a bit of bike chain and some bolts, build a tiny version of a pipe bender for bending fencing wire into cool shapes. Actually could be very handy for somebody who makes wire artwork. Good job.
4:28 remove a loose nail from the back of an MDF and particleboard cabinet and use a rivet to fasten the thin MDF sheeting back on. This idea is utterly terrible, what a complete waste of time. Move the nail along to a fresh spot and hammer it back in or better yet, replace the old nail with a screw that won’t easily come loose. Nails suck. This hack sucks. This video sucks.
4:37 use a drill and your bench vice to twist more fencing wire up and then use a hammer to flatten the twisted wire into a weird, flat, twisty bit of steel that belongs in the rubbish bin.
What a horrific waste of everybody’s time. Put some effort into your videos.
2:52 even better tie a taut-line hitch
Чувак ты все сказал за меня .. жирный лайк тебя бро
Hahahaha
I don't know, man...
I was thinking about the effort that went into making this; he worked pretty hard to be this unhelpful.
I agree. Absolutely a waste of time this stuff.
You have saved me the time to say that all, that will also be a waste of time summoned to the time I've already wasted viewing this video
Доктор Дью уже в пути..
Берем кусок наждачной бумаги, ровно по центру вырезаем кружок, остальное выкидываем. Мастер рукожоп
Срочно нужно к доктору 🤣
я после заклепанной стенки шкафа, вышел в чат
@@ART7945 а закручивание проволоки вокруг гвоздя в тисках - ну это сильно, да.
а то,что этим куском наждачки в 5 см.кв он пытается что то зачищать? тебя не удивило? да еще на шуруповерте? так каждую минуту надо наждачку переклеивать будет.
@@ideal7067 а ты кто мне указывать,что сперва делать? Я свое мнение могу и буду высказывать когда захочу,без всяких "накидай видосиков". и хуй ты мне запретишь. еще вопросы?
Этим лишь американцев удивлять они вечно изобретают какую то херь, даже комменты почитайте что и подтверждает мой комментарий.
А что автор из плоской косички хотел сделать? Может напильник? Да и насколько надо быть рукожопом чтобы изобрести гибочный станок для 1 мм2 проволоки.
Ге-гениальность 😄. Но лайкос поставлю за настойчивость
Большинство из того что месье показывает.. вообще не поддаётся логики. Что это, для чего это, куда это использовать? реже бывает и годные игрушки
Когда коту делать нехер он яйца лижет... Моя бабка мне так говорила и теперь я уловил суть поговорки
This is some of the best ideas ive seen on youtube. Thanks a lot!
Как всегда. Мистер Сани в суперпозиции. И хуйня и не хуйня
Срочно обратись к психиатру, ну или к доктору дью 😂
Есть очень интересные вещи и за это большое спасибо , но есть и большая часть изобретений про которые хочется сказать - а зачем городить огород ?
Как зачем? Чтобы Доктор Дью без материалов для видео не остался)
大変見事な動画でした。ありがとう。試作品のお願いをしたいです。
30 процентов "советов" вызывает возглас:- фига ты "гений". А остальные 70:- на хера ты это сделал, а главное зачем???
Muito bom.. vou fazer com meu alicate o cabo com chumbo...mesmo wue eu perca meu Alicate..já que vai destemperar o aço de que foi forjado..legal..
Знать бы ещё, что и куда применить
I like it a lot thanks for teaching me 👍
excelentes criatividades! 👏👏👏👏
Стамеска из пера это шедевр, металл там говенный
Да уж.... Незаменимые и уникальные вещи
Целесообразность этих изобретений? Кто подскажет!!!
Ролик снят для того чтоб он просто был...
Для доктора снято
Çok güzel olmuş ellerine emeğine sağlık 🤝🇹🇷
Это называется очумелые ручки... Когда заняться нечем... А проще говоря посмотри и забудь...
Very clever 👍👍
Motivational, thanks
Wieder top gemacht 👍👀👏
¡¡ Wow..genial.!! 😃👍👍👍👍
Wonderful 👍👍👍🤝
Amazing ❤❤❤👍
I had to admit, this is amazing
❤️
Which part do you mean ? Whats so amazing about this crap ?
Literally nothing is even remotely good. This guy is just fucking braindead.
@@JoeBaR-202 👍👍👍☕
Did anyone else think man that would make a good oil slinger right before he stuck the pushrod in the drill
Хорошо, что доктор Дью всего этого не видит...
sus ideas son excelentes, profesor... saludos Rafael, Cusco, Perú...
Посмотрел видео, теперь IQ как у Эйнштейна
Молоток! Продолжай в том же ритме! 🤨👍
미스터 서니였구나^^ 이분은 뭔가가 있어^^
Good job 👍👍👍👍
AMAZING SUNYFICIOUS !! 🤜🏻🤛🏻
Yesss sir 👍👍👍
Ok I'm not gonna lie the chaulk line one actually looks like a good idea, I wonder if they sell caps like that
THAT CABLE HACK IS A DISASTER WAITING TO HAPPEN !!!...
NEVER DO THIS ON BRAKE, CLUTCH OR ANY OTHER CABLE THAT YOU RELY ON !!
Perfect invention
Половина вообще не понятно зачем делать?
No welded bearings anymore ? I start to miss them 😂
Привет, из России. Мы любим таких изобретателей))) Когда коту заняться нечем, он яйца лижет)))
@@user-xo8ol5ws8x gato 🐱🐈 russo 😃🤭🤭🤭🤭😁😁😁😁😁😁
i tought it was mare inertaing and he sad part about this is i will forget it
От некоторых лайфхаков волосы встают дыбом 🤦♂️
Пойду завтра в гараж изобретать велосипед..
All idea and tips are very useful and best. My students and l always watch your all videos without skiping . Love you ❤️
❤️
O último item do vídeo, qual é a utilidade ? Pois acho que cortaram o final.
👍👍👍
Excelente, parabéns!
That guy moves really fast !
👍👍👍 Amazing!
ты ебо-бо чтоль? Где в этой параше ты эмэйзинг увидел?
Good working
😮👍❤Vielen Lieben Dank
구독하고갑니다.좋은영상 부탁드려요~~ 좋아요
These are some of the most actually usable tips so far
Nice tips
🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Кто зашел сюда после просмотра доктора Дью?)))
Я просто в предложках наткнулся, но смотрю что в комментах половина свои🤣
Как развидеть, и больше никогда не вспоминать? Водка не помогла
Зачем перо по дереву испортил? Его то же можно заточить.
hi sir all video what you take camira and len? i want to know thank you
Very niceee
Very nice video
Thank you for not saying the word 'hack'!
You are a true genius genius a wild genius
Так это же школьная программа уроков по труду. Но повторение есть мать учения.
Эй, мистер санни? Доктор дью передаёт привет!
👍👍👍
Главное Доку не показывать, а то у него бомбанёт!!! 😂😂😂😂
У него уже на них иммунитет 🤣
Голь на выдумки хитра (c)
Good ide
Que material es el que derrite para hacer la cabeza del cable?
Plomo
👏👏👏💥👍👍👍
последнее, с проволокой, вообще как зашло, нет, ВООБЩЕ КАК ЗАШЛО!!!
а что это? 🤨
simplemente exelentes trucos
El metal que fundiste para hacer la terminal en el cable, es Al ? Pb ? Sb ?
Pb
Muito bom, parabéns 😉👍
😱👍👍
Bom pra que?
Какая нахуй бомба, хуета это все.
Mpo
Bro 🤜
👍👍👍
They are great. I used to watch this videos. Very useful.
Great
2 nd me in 38 sec
good idea
💯💯💯💯💯💯💯👌👍🤝
Genial
2:43, el calor derrite el mango de plástico rojo
Everything okay except the back ground music 🤯
if I only had a dollar for every version of a paint stirrer this guy has made... I'd have a few hundred dollars.
I believe you’d have $17
@@Surreyredneck you know he made more videos than just this one, right?
Trug gerade trhqö=&_& vedrgfecfhegvdfdfgfrgttzzgttthhfhhhhggcb b vcgĥvgccghvhhhhbvvvvvheĥcgvvvvbvgjfvvv vchrrŕrre
Ха, это же турецкий Полулях 😄
Nice video
❤️
Noventa porcento das coisas foram feitas só serviram pra gravar o vídeo.
Зачем это всё???
Ни хуя не понятно, но очень интересно!
Какой ужас. Не дай бог такого умельца в родственниках.🙈
Nice
MM77 👍🏼👍🏼 Approved
🙂👍👍👍👍👍👍👈
Most of these videos are usually kind of crap but this one actually has some good ideas well done I appreciate you posting
Hi my friend, I enjoyed it, great as always, thanks for sharing👍🙏💙
Доктор в отпуске, жаль, он бы полечил....
Good