DIY - How to make table from pallet wood
Вставка
- Опубліковано 24 вер 2018
- Make beautiful Dining, Farmhouse or Outdoor table from 100% reclaimed pallet wood. It is easy and cheap :)
Whole project took me about 10-15 hours. I focused on the details, and cost me about 20$ (tools not counted)
Hope you enjoed this video and if you like it, please share and subscribe! - Навчання та стиль
This was perfect as a vanity desk for me. ua-cam.com/users/postUgkxMAlHv7-BBWMrPRm5-uEoD6rtdT7SG2Qr Especially the glossy finish. Easy to cleanI was looking for something that wasn't the traditional white and with more of a modern feel. This fit the bill beautifully. I put it together with no problems, by myself in under an hour.Make sure you double check where you place the drawer tracks before screwing down. I had one track that needed to be aligned with different holes than the rest.
MUY buena calidad, el texto imagenes. ua-cam.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO Un manuel muy completo y trabajado. Resulta muy práctico. Para principiantes y profesionales. Lo recomiendo
Amazing what fulfilment DIY 👍
Hi everyone! Thanks a lot for your amazing support, positive feedbacks and more than 1Milions views. Hope you enjoed this video. Thank you again!
I'm just starting my new journey building cool stuff out of pallets and recycled materials. Absolutely loving it. I've got a couple of small tables to do and some of the designs I've seen are a bit complicated. Your way of doing it is absolutely spot on. No special equipment really simple but what a great result. Thanks mate.
I work for a furniture factory. And you did an amazing job. Only problem I seen was not enough glue used on the legs. "Only inserted in the dowel pin holes". And you should also put you some corner blocks under the table with lag bolts. The table will be solid as rock. But yeah you did very good 😋 oh yeah you could have used that counter sink bit to counter sink the screw holes on top and then use a wooden flat plug or a mushroom plug.
Thank you young man that was very useful. I'm an older lady doing a school bus to RV conversion right now. I'm going to be building a kitchen counter pretty much using your method ✌️😸
Great to see a nice table being made using only tools that the average person might have and can afford, i.e. Miter Saw, Drill, Sander, Pocket Hole Jig. No expensive tools like a Planer and/or Jointer. Good job!
This is BEAUTIFUL! I love the way you laid the boards in two different directions. Great job! thank you for sharing.
Awesome table!! Love it, you clearly have tremendous carpentry skills 👌
I learned some great tips from this video! These tips are AMAZING!!!
This is a superb wood working book I`ve ever read, t.co/SGIXIPXR0z . Both novice and some skilled woodworker can gain a lot of general info using this reading material. I`ve been very amazed how frequently I use this to look up woods at places like to restore and salvage spots.?
F*****g quality that mate. Love it, I'm gonna have to have a blast at copying this in the future!
I saw too much how to do table videos but this is one of the bests
Dude that was awesome nice table build and the best part about it all free wood I thought I was the only one good to know there's someone out there doing something good with something people want to throw away.
Definitely one of the better looking pallet tables on UA-cam
This is very satisfying to watch. Thank you.
Wow your hard working brought you a beautiful table. I can't believe it from the pallet wood. Nice job! 👏👏👏👍💕
Beast Mode Video Dude!!! Still cant fathom why people put thumbs down on great videos like this like they couldve done better. If they couldve then dont thumbs down. Make your own Darn video and give this guy his props!!! This is beautiful sir!!! You definitely wont have a $$$ issue when hyper inflation hits this country.
I really like the simplicity of the design. I’d step the rails back 1/4” for a shadow line.
From all the videos I gathered this morning to learn how to do a table from some pallets, I'm going to go with yours. Thanks and subscribed!
The table turned out great. Enjoyed watching the video.
I love seeing trash turned into something beautiful! Great job!
Man...a simple project but...so BEAUTIFUL ...👍👍👍👍👍👍👍👍
@ I normally don't like people saying that in a comment section but... I subscribed, so I can't say anything bad about it.
Świetna robota!
Jeden z najlepszych filmów tego typu. Efekt końcowy bardzo zadowalający!
Great eye for detail and efficiency. Sparing use of resources, make this project doable.
Looks great, video was very well done! Enjoy your table.
I found a whole door that I wanna
try this with. So excited!
Nice table and nice editing. You deserve way more views on this table. This is the quality of a youtuber who has thounds of subs.
9
Am having the same idea with the same kind of wood you’re the greatest man
Top tradesman great work
This t.co/z6o0f8z2H4 , is a very comprehensive woodworking book! It breaks every little thing down, utilizing words, drawings, real pictures, and different diagrams. It`s unbelievably informative and helps me feel like I could help my sibling while we make our furniture together.?
"" Brilliant "". Greetings from Ireland.
This was a treat of a video. Beautiful piece and loved the editing. Made me regret throwing away some pallets I had.... not that I’d have the skill to build that. Awesome job!
just do it!
You're confidence in your table router skills makes the brown eye pucker.
Good job! Love the layout of boards on top.
I have so many pallets at home I collected for free. Now I know what to do with them! Thanks for sharing your awesome video!
Well, Thats probably the nicest pallet wood table Ive ever seen. Pretty Rad.
best woodworking mixed technolgies here, by a very cleaver author !!
Clean project and thanks a million for sharing your idea! :)
I like the sanding patterns - they really come up nice in the final staining, almost like a carving!
Yea me too. This is cuz pallet wood is just rough cut lumber so unless you sand for hours or have a plainer you’ll see the cut marks. I think it looks cool
Very nice! From Italy🇮🇹
It's a Lovely Table.
Beautiful indoors or outside in the yard.
It makes great use of old wood that may have just ended up on the burn pile. ✌😷
I like everything made of wood because it makes me feel healthy.👍
ok nice to hear
Pallets often are on the floors of warehouses, absorbing whatever chemicals are around. I wouldn't call pallet wood healthy honestly.
Brilliant, love it , Well done I want one .
excellent job! I liked watching the video. congratulations!
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Finally someone using visible screws on surface. Looks great
charles foltz I love how it looks!
Nice projects 👏👏👏👏👏👏👏
I like this design. Sweet and simple
Great job! I leaned about pocket drills - very helpful
That’s a really good looking table!
😇😉😡😬😢
yes it be nice
You are the best ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Wouaaaaa, wonderful work.. 👌
definitely practical, recyclable and economical, it did not cost you anything for your pocket $$$$$ labor on your part, recycled wood used nails, I think the only thing that cost you is electricity, tools and varnish .. very pretty I congratulate you and you gave me ideas .... thanks for the support
i love it. i am collecting a lot of free pallet wood so I am going to make this. so surprised how good it looked even though the wood is all different
That was awesome! Loved the video, too.
Very inspirational, specially during lockdown when most of us have time on our hands. Great work.
From an 84yr old female, I only found this after cutting up 20 odd pallets for firewood😢😢 now I will need to get more to make a few tables (not your finesse) as I want to use two for making tables like your saw bench in the background and others for placing sandbags on against windows for flooding protection thanks heaps
I have worked a lot with pallet wood and I have to say you make it look really simple.
Good work.
Skvelá práca 🤘🏼🦾 Dal si mi výborný nápad.
Dúfam, že budú aj ďalšie videá ✊🏼
Very goog job.But the machines are perfect!
BEst pallet table on UA-cam dude, well done - Wish I had the equipment lol
just do it!
Really cool! Maybe you should also fill in the screw holes with something. That would make it top level. Great work!
I disagree. I think having the screw visible gives it a more rustic Kinda feel, since it’s scrap and came from a rough background, it suits the feel of the table imo
At first I wasn't a fan of the screws on the top, but as I began to look at the table, it brings out the reclaimed materials feel that I think you wanted. Nice job, now have a few cold ones.
Foarte interesant...!!!👍😊
Great table !!!!! It's so easy with your video . Awesome, thanks.
Thanks for sharing :) I made coffee table out of pallets :)
Very nice. I learned a lot from your time-lapse presentation!!!
super boulot ;) et belle table
Nice work!
That's one of the nicest pallet table I've seen in a long time. How tall did you make it? Great video.Great job.Consider me a subscriber. 2 THUMBS UP 👍 👍
patrick mcglone .. he did a whole video on how he made it dude .. you where watching it 🤣
@@oskargarden4559 09
Oskar Garden, yeah he mentions the height exactly 0 times
Douché
ua-cam.com/video/KqjplJiLhxA/v-deo.html
Your video gave me a wonderful idea. I'll be making one of this but a little shorter for my kiddo. Great job!
Looks great!
Bon travail....j’aime le côté rustique de cette réalisation...merci pour ce partage
very nice
¡Excelente! ¡Felicitaciones desde Chile!
Ive seen lots of table build but i like this the most 👍x1000
This is great. I like the use of pocket holes AND dowels for strength. This is what I was planning on doing on my latest build and now I've seen it done I know that it's a good choice. Thanks for the tips - I learned a lot from watching this video. Subbed!
wow that pocket hole tool is awesome, i've never seen anything lke that
Really enjoyed watching this..... In a strange (but nice) way the camera work and music reminded me of Benny Hill 😂
Thank you for posting amigo 😊👍
Hermosa mesa💕 excelente trabajo!!
I don't fancy the exposed screws on the tabletop, but all in all super!
Patricia Crosby in other projects I used nails with thin head and glue. But this method gives table a rustic look ;)
i hope everybody can make his own table ! you will see, it's awesome !
Thought you were going to throw everything in the plainer but I liked how you kept the pallet look and made it even better. Great job!
Rob Diaz Thank you. It was the purpose :)
Grande vídeo! Um dos melhores que já vi! Nota 1000! Grande abraço - Brasil
What a precision in making. Absolutely stunning!!!
very good, i like it
Wish I could find pallets in this good of shape around me, I would love to build this for my new house! Beautiful table.
Belíssimo trabalho , vô fazer uma , só vô esconder os parafusos !! Parabéns !!
Nice video man 👏👏👏
Great job will save the video and try it
Great work 👍
And I like your editing too
Wow! What you can do with pallet wood! Many congratulations!
WHAT a terrific job! Top notch!
NICE DONE .........👍👍👍
thank you for the video... very creative and helpful....its fun to watch too!
You are a flippin genius... defo subscribing for inspiration purposes.
Super stół, właśnie takiego video szukałem ;)
Beautiful. Easy to follow. No wasted time on talk. Video does all the talking. Made myself a table from deck wood given to me by my neighbour. Did not turn out as good but hey, its for the backyard and serves the purpose.
Thanks once again. Great video.
Nice job, was pleasure to watch this, keep up the good work
Nice jobs! The table is very beautiful, also scrap wood of your country so good.
probably from china thhe wood
Beautifully done.
Nice job!
Simple but very amazing...
Good job bro