Worked like a charm. I buy some pants at thrift stores that are like brand new. I get my waist size but if they are a bit long I buy them anyway to hem. I had 3 pair in the closet and found your video go finally get them done. Your video made it easy and thanks a million.
Thank you! I just got my tape from Amazon, it did not come with instructions. Finding your video is a life savor! And money saver, I was quoted $16.00 a pair to hem, goodness.
It's your decision. But, if you were in business to hem random strangers pants all day, and you have no other job or anybody else to rely on to pay your rent or mortgage, how much would you charge??
@@jakefriesenjake you make a good point. The hemming fee also includes the labor and some of them hand stitch the hems which take more time. I was able to afford $15 a pant a year ago to get all my pants hemmed. Up to this day, the hemming has stood strong through several washings and dry cycles. Now, I am wanting to save money and will try hemming this method for the two new pants I bought.
it does make it a little heavier. If you cut off the excess, just ensure that you roll the end into the cuff. Otherwise you'll get fraying inside the pant leg.
I wonder if it's a good idea to actually snip off that original 1/2-inch hem that the jeans come with. Then it would lay much flatter when ironing the tape on.
You can do that, only concern is that with a cut edge, it will fray over time. With the tape method, you can't really roll and protect the exposed edge.
I haven't tried this particular tape, but there are brands that are permanent. Read the packaging. Name brands such as Dritz and Wrights seem to do the job, using this UA-camr's method. Some are made with a peel off tape side where you iron one side at a time.
Before I try this, I do have two questions (and maybe you addressed them in the video and I missed it) 1. If I mess up, can I remove it even after ironing? 2. Will I have to re-do this every time I wash? Or is it wash-resistant
You can’t really undo it, the tape melts and fuses with the fabric. You might be able to get it apart but I would be worried about tarring the fabric. It does not come out in the wash unless you don’t get it fully fused. Take your time and just make sure it’s how you want it before applying heat
@@efdupdate? How many washes has it taken to undo? 😁. I am thinking of doing this to designer pants. But I need to do this quick for an event. In the future would I be able to still get it professionally hemmed? As in will there be yucky glue stain etc?
Stupid question I'm sure, but has anyone ever used heavy duty staples to hem pants? I'm talking just knock around pants and jeans, nothing fancy. I wouldn't think they'd be too obvious if you only use a few for each leg.
Sure was refreshing to watch this and not have to try and tune out awful music or a lengthy backstory. I’m going to do this instead of using my temperamental demon possessed sewing machine. 5 kids and no time to lose!
Bro lol. No. You do just one side, with the iron on a low-medium setting, iron directly onto the tape, when it cools you PEEL the paper off, then place the other side of the fabric to be hemmed over that and iron again
@@efd I think the tape with paper has glue on one side. After ironing the tape on over the paper, you remove the paper and put your hem over it. The glue doesn't work as well though.
@@efd You hit the nail on the head because the instructions on the back of my tape are exactly the way you demonstrated, thanks for the step by step video! 👍
The original hem is of a smaller circumference than where it meets the leg when folded and results in surplus fabric pleating. I'd suggest you learn to sew or find someone who can. Trouser hems like this are pretty basic, but blind stitched ones are more difficult and require a special machine or be very carefully hand sewn.
Thank you!
I don't own an iron, but I can confirm this works just as well with a hair straightener 😂👍🏻
Ha! That’s awesome
This is an absolute lifesaver! All the slacks in my size are too long for me and I have work in an hour. Thank you :)
Glad it was helpful!
Worked like a charm. I buy some pants at thrift stores that are like brand new. I get my waist size but if they are a bit long I buy them anyway to hem. I had 3 pair in the closet and found your video go finally get them done. Your video made it easy and thanks a million.
Glad it helped!
everybody else made it seem complicated but this video did it for me, thank you!
Thank you! I just got my tape from Amazon, it did not come with instructions. Finding your video is a life savor! And money saver, I was quoted $16.00 a pair to hem, goodness.
Awesome!
It's your decision.
But, if you were in business to hem random strangers pants all day, and you have no other job or anybody else to rely on to pay your rent or mortgage, how much would you charge??
@@jakefriesenjake you make a good point. The hemming fee also includes the labor and some of them hand stitch the hems which take more time.
I was able to afford $15 a pant a year ago to get all my pants hemmed. Up to this day, the hemming has stood strong through several washings and dry cycles.
Now, I am wanting to save money and will try hemming this method for the two new pants I bought.
You did an excellent job of showing how to hem with tape !! Thank you !!
I love the way how you explain, so easy, and quick! Thank you!!👍
You are most welcome!
This is easier then I expected. Thanks for the tutorial!
you are most welcome!
Thank you! I've watched other videos and they look so confusing this really helped!
This helped me so much! Thank you :)
Thank you! Just used this and my pants fit perfectly now :D
Thank you for this DIY video because I sure was going to the Taylor to have my pants hemmed. I'll sure save 15 dollars with this method.
glad it helped!
Thank you, your video was very helpful!
So very well done, thank you!!!!
Thanks Debbie
Why do stores not have anything for us short guys?!?!?
Maybe that’s a million dollar idea, instead of the tall and big store, we create a short and fat clothing line, haha
@@efd there's an online store for short people but it's expensive.
I know right!!!
@@efdamen! 😅
If you really wanna know it's bc you can always take fabric off but can't usually add it on, this is my realest answer
Just the video I was looking for. Thanks
Glad I could help!
Great job Fred
Thanks!
Wow, great video. This will help me out a lot!
Thank you so much for sharing this information. Really appreciate it
no problem, hope it helped!
Awesome thank you very informative
I am doing this now. thanks Mr 😊
How long will this last?
Thank you for this video it really helped I appreciate it!
Unexpected video today. Well done.
Easier than sewing and cheaper then having someone do it 😀
Lifesaver, thank you very much! 👍🏻
Happy it helped!
I didn’t understand the explanation on the back of the package, your video made it clear. Thanks for taking the time to show how’s done!
Glad it helped!
To save permanent creases when you turn them back you can iron them not inside out first.
Lol turning the pants inside out was the trick. Thanks…
Great tutorial, subbed
Great tutorial very easy to follow 👍
Amazing. Have to hem my boyfriends pants for tomorrows event and this tutorial was perfect thank you
Glad it helped!😊
Nice helpful video...thank you I will definitely use this trick.. 👍
Hope it was helpful 😀
Good idea
good job..i also did this to save lots of money..then tried the ..Heat n Bond peel tape which i hated..going back to the fusion tape..
Much appreciated, thank you 🙂
Thank you
I have 3 pairs of dress pants and the hem tape and a iron.should i do a half break on them
How does it hold up with washing the pants?
Thanks had to fix up my scrubs
awesome, glad it helped!
Thanks 🙌
Thanks!
welcome!
Thank you 🙏
you are welcome!
I have been wasting my money on alterations! No more. Thank you!
For sure! Even if you don’t like fabric tape, sewing it yourself isn’t hard either. I have another video showing that.
What about wrinkles on either sides Bro?
Nice sir❤
Thank you for this. I asked my mom how to use it and got called stupid. Does it last long?
Thx for the video. Does it hold up in the washing machine?
it will if you use the proper amount of heat. If it doesn't completely melt, it can come apart.
What if you wash the pants?
Thanks 😊
you are welcome!
hey! so you don't need to dampen the pants before ironing?! im about to order this and try!! thank you for this video
I did not dampen them first, its all about the heat.
What if I messed up on my measurements? How can I remove it 🫣 help
I tried this and my pants look like they're flayering now how do i fix that
Doesn't having all that extra fabric at the end of the leg make it heavier? Why not cut some of the excess fabric?
it does make it a little heavier. If you cut off the excess, just ensure that you roll the end into the cuff. Otherwise you'll get fraying inside the pant leg.
you can
Can it be removed later? I mean if I use this tape to tighten a top and later have to make it loose on the sides.. is it possible to do?
no, it will leave a residue
I wonder if it's a good idea to actually snip off that original 1/2-inch hem that the jeans come with. Then it would lay much flatter when ironing the tape on.
You can do that, only concern is that with a cut edge, it will fray over time. With the tape method, you can't really roll and protect the exposed edge.
Thx
good job my friend... is it washable if you know?
it is washable
@@efd that's even better. Thank you
👍👍👍👍
When you wash your pants after using the fabric tape does it come apart in the washer
It will over time, especially if you have any gaps. Also depends on the fabric.
Any worries on synthetic materials? I have light weight slacks for work when it’s hot. It’s made of some kind of stretchy breathable material.
I don’t know that I would use this on that type of material. It works good on cotton, I don’t know that it would fuse with a nylon or polyester
@@efd they make press on tape that doesn’t require an iron! Just ordered some to see , thanks for the video and reply!
Just tried this on Polyester... did not work at all sadly.
@@andyblunt2152 thanks for the info. Might have to hem it the old fashion way.
Will it endure through washing and dry cleaning?
I haven’t had any issues yet, I do think it will need redone after awhile.
@@efd thanks
@@efd wonder if it ruins pants if you have to redo it over and over again every time you wash pants? If not, is actually a good solution
I haven't tried this particular tape, but there are brands that are permanent. Read the packaging. Name brands such as Dritz and Wrights seem to do the job, using this UA-camr's method. Some are made with a peel off tape side where you iron one side at a time.
Comes off in the wash depending on how permanent you get with it
Before I try this, I do have two questions (and maybe you addressed them in the video and I missed it)
1. If I mess up, can I remove it even after ironing?
2. Will I have to re-do this every time I wash? Or is it wash-resistant
i have the same question!
You can’t really undo it, the tape melts and fuses with the fabric. You might be able to get it apart but I would be worried about tarring the fabric. It does not come out in the wash unless you don’t get it fully fused. Take your time and just make sure it’s how you want it before applying heat
Can it be undone, like stitches?
It cannot, it leaves a residue.
Can i remove this tape later on without leaving marks? Want to do with my baby's jeans? Its little long for him now but in few months he will grow up
I would not use this if you want to remove the Hem at a later date. This will leave a mark.
@@efd thanks. Any other hack which can be removed later?
I dont know i thought it wasnt work when all i had to do was leave it alone im i onow i have undone by pulling it apart tho
Can you wash them after using this kind of tape??
yes, you can wash it
In case i want to remove it then how to do that?
it can't be removed with leaving stains.
Does it not too thick without cutting it off
The problem with cutting is you can’t roll the cut end to keep it from fraying.
does this last forever?
It’ll last a long time.
How to sew the end of bias tapes
How to end a bias tape?
But it looked like you have extra fabric folded at the edges i have the same problem
I did, I put the fabric tape up high.
Does it stand up to washing and dry cleaning?
So far so good but I think I’ll have to reapply in the future
Where to buy Fabrics tape?
@@shaskhan2585 amazon, there is a link in the notes.
it does. just got to deal with the excess
@@efdupdate? How many washes has it taken to undo? 😁. I am thinking of doing this to designer pants. But I need to do this quick for an event. In the future would I be able to still get it professionally hemmed? As in will there be yucky glue stain etc?
Stupid question I'm sure, but has anyone ever used heavy duty staples to hem pants? I'm talking just knock around pants and jeans, nothing fancy. I wouldn't think they'd be too obvious if you only use a few for each leg.
I’m sure you could. My only concern would be them coming undone and scratching your leg.
Once in an emergency!
How to remove it
This can’t be removed, it binds the fabric
Why Amazon. Sold in dollar stores Walmart, sewing stores. Save your money on postage. 🇨🇦🇨🇦
Convenience, and I have Amazon prime so no shipping cost
@@efd Same here, the movies alone are worth the price. Free shipping & returns on most is a bonus. Good video thanks
The background noises😂
Never quiet in my house
Sure was refreshing to watch this and not have to try and tune out awful music or a lengthy backstory. I’m going to do this instead of using my temperamental demon possessed sewing machine. 5 kids and no time to lose!
1 sec boom pants ruined
Bro lol. No. You do just one side, with the iron on a low-medium setting, iron directly onto the tape, when it cools you PEEL the paper off, then place the other side of the fabric to be hemmed over that and iron again
I must have gotten cheaper tape, it doesn’t have a paper backing
@@efd I think the tape with paper has glue on one side. After ironing the tape on over the paper, you remove the paper and put your hem over it. The glue doesn't work as well though.
@@efd You hit the nail on the head because the instructions on the back of my tape are exactly the way you demonstrated, thanks for the step by step video! 👍
lol.no.
The original hem is of a smaller circumference than where it meets the leg when folded and results in surplus fabric pleating. I'd suggest you learn to sew or find someone who can. Trouser hems like this are pretty basic, but blind stitched ones are more difficult and require a special machine or be very carefully hand sewn.
From Walmart cheaper than Amazon $3
Nice!
Is it better to use a steam iron istead to increase the temp ?
i wouldn't use steam. I think including water will weaken it.