Here I preform a valve lash on a John Deere 6068. Five of the six cylinders were just a hair out of spec. Buy T-shirts so I can retire. www.amazon.com...
It varies from engine to engine. The industrial 6068TF275 I did has the following tolerances: Intake: 0.31-0.38mm ( 0.012-0.015in) Exhaust: 0.41-0.48mm (0.016-0.019in)
Diagnostics via text is incredibly hard. That being said, loss of power is almost always related to fuel flow restriction somewhere. I would make sure you have fresh filters and clean fuel. Then check any lift pumps and then maybe your high pressure pump to see if it’s moving enough fuel at the right pressures. Also look for leaks or air in the lines someplace.
@@sinergiaiped6765 Puede que sean las mismas medidas que puso el chico del video, son: - Admisión: 0.31 mm - 0.38mm (0.012 pulgadas - 0.015 pulgadas). - Escape: 0.41 mm - 0.48 mm (0.016 pulgadas - 0.019 pulgadas).
ty for the video bro... keep going!!!
Nice video but I wish you were doin a tutorial and explaining what your doin
Combien de mm pour l'admission et pour echappement
Hi, can you please tell me what dimension is 15 thousands for the feeler gauge?
I’m in Europe
@@claudiughidersa4480 letmegooglethat.com/?q=.015+inch+to+mm
Vous régler à combien pour les jeux o.25et 45 où comment
Hello what are the settings for valves? Thanks
It varies from engine to engine. The industrial 6068TF275 I did has the following tolerances:
Intake: 0.31-0.38mm ( 0.012-0.015in)
Exhaust: 0.41-0.48mm (0.016-0.019in)
@@epicfred hi i have 6068trt on renault ares 640rz (tractor) and i was losing power , so now im looking what to do . Thanks for reply!
Diagnostics via text is incredibly hard. That being said, loss of power is almost always related to fuel flow restriction somewhere. I would make sure you have fresh filters and clean fuel. Then check any lift pumps and then maybe your high pressure pump to see if it’s moving enough fuel at the right pressures. Also look for leaks or air in the lines someplace.
@@sinergiaiped6765 Puede que sean las mismas medidas que puso el chico del video, son:
- Admisión: 0.31 mm - 0.38mm (0.012 pulgadas - 0.015 pulgadas).
- Escape: 0.41 mm - 0.48 mm (0.016 pulgadas - 0.019 pulgadas).