also blowing lightly on the top of the oil will make the bubbles that get stuck at the cerfice tention of the oil will float up the last part and get out of the oil.
No one ever tells us to let the locktite cure on the piston screw before filling the shock. Pretty important I found to let them sit for 24hr before adding the fluid. Or your shock pistons fall off every time.
also blowing lightly on the top of the oil will make the bubbles that get stuck at the cerfice tention of the oil will float up the last part and get out of the oil.
Very good 👍
At 45 years old I finally figured out how to bleed a shock
No one ever tells us to let the locktite cure on the piston screw before filling the shock. Pretty important I found to let them sit for 24hr before adding the fluid. Or your shock pistons fall off every time.
This always a good rule of thumb...but I am too impatient for that. Good advice!