Hey man I got this same bike and I just had the carbs done by a Mechanic and it won't run for shit so got them back off and the question is do these carbs take welch plugs We're guessing it does because everything looks perfect
WD-40 is a water displacing spray and a lot of folks use it to lubricate. Perhaps ya do not know that in 4-6 months that stuff turns into a glue and the next guy is gonna really HATE you for doing that...... Nearly everyone does NOT know this, but, I do. grease is better, as at least the fuel will dissolve it.
all the things you did, I don't think you can find it in the owner's manual. Is there any other manual you used? if so, what is it? please I need to know as I need to fix my carburetor, it's leaking badd.
I would recommend a clymers manual for this process. If your carbs are leaking I would highly recommend ordering a carb rebuild kit online they are usually under $100 if you don’t have experience with this process i would recommend bringing your bike to a qualified Kawasaki dealer for a carb rebuild and sync this typically costs around $300.
Too long, to be honest, partly because I was lazy, partly because of waiting for supplies, and partly because I didn't know what I was doing. The whole ordeal took at least a month.
Good Video Sir. Just wish you showed the vacuum hoses routing. I have the same bike but the manual seems too confusing for me. Thanks anyways.
Still need. I believe I just figured it out
No better feeling than doing it yourself eh, and the reward when you tap the starter. Nice job.
Good job, thank you for sharing your experience, very helpful.
Hey man I got this same bike and I just had the carbs done by a Mechanic and it won't run for shit so got them back off and the question is do these carbs take welch plugs We're guessing it does because everything looks perfect
WD-40 is a water displacing spray and a lot of folks use it to lubricate. Perhaps ya do not know that in 4-6 months that stuff turns into a glue and the next guy is gonna really HATE you for doing that...... Nearly everyone does NOT know this, but, I do. grease is better, as at least the fuel will dissolve it.
all the things you did, I don't think you can find it in the owner's manual. Is there any other manual you used? if so, what is it? please I need to know as I need to fix my carburetor, it's leaking badd.
I would recommend a clymers manual for this process. If your carbs are leaking I would highly recommend ordering a carb rebuild kit online they are usually under $100 if you don’t have experience with this process i would recommend bringing your bike to a qualified Kawasaki dealer for a carb rebuild and sync this typically costs around $300.
Thanks for sharing! How long did the first clean/rebuilt/assembly take you?
Too long, to be honest, partly because I was lazy, partly because of waiting for supplies, and partly because I didn't know what I was doing. The whole ordeal took at least a month.
😂 sounds like me this past few weeks
So why was it leaking?