Anatomy Of A Sprinkler System
Вставка
- Опубліковано 28 бер 2019
- Shop now: www.sprinklerwarehouse.com/pr...
Sprinkler Warehouse Pro Adrian Sanchez talks about the basic parts of the sprinkler system.
#sprinklerwarehouse
#irrigation
#sprinklersystem - Навчання та стиль
Excellent overview on an inground sprinkler system, and the considered comments here add good supplementary info as well.
Great video. simple, informative and detailed.
Great, informative, direct, good animations, well edited, and clear audio. Thank you so much for making this and informing the public so well.
سجاد غریبی
@@hesamseifi5660 AC/DC s
Please losend
Wonderful! Great illustrations!!!!
Great video!
This video is a really good job. Well done.
I appreciate your video also I like to see using the hose faucet as a water supply vs the main line pressure difference 👍. I enjoyed watching your video thanks 🙏
You wont get near the volume of water out of faucet. Wont have proper backflow device either
Seriously. "Later Irrigater" is a brilliant slogan. Still laughin' about that! Ha!
I know I got a real kick out of that one
Make sure when you put glue on your PVC that you twist the pipe or the fitting a 1/4 of a turn to smooth out the glue so there are no air bubbles or pockets that can cause leaks
Make sure to never install pop up sprays heads with fixed nozzles and rotory head together on the same zone.
👍Professional Presentation! 👍👍
Used to be obsessed as a kid with those! 😂
OMG! Anatomy is a great concept to understand the length and breadth of anything.
Thanks a lot!
Thanks for a great video I do not have a backflow system for my sprinklers, so I guess something else to do.
Glad to help
I'm putting in a fence that will go through an existing zone so I'd like to cap it rather than make cuts and repairs around where the fence posts will be and just trench and lay a new line further in from the property line. Does each zone run separately from the valve box or can one valve run multiple zones? I'm wanting to just cut through the existing zone pipe, set the posts, and trench the new line at a later date. What i don't want to do is cut out the line and then screw up several other zones if they're connected.
best video on sprinkler systems ever
Thank you!
Great video
That kid did not want to high five. He wanted to throw that ball!
Wow no comment at all. This is a very good video.
Excellent. To the point. Informational. Educational.
Twist pipe/fitting 90 degrees. Dont cram 3 valves together like that. One little leak in there and you might have to cut out all 3 valves to repair it. More hydraulically sound to have valves near middle of zone anyhow. And rainbird is a great product. EXCEPT FOR THE CONTROLLER THEY SELL AT HOME DEPOT. AAAAAUUUUUGH !. You have to set a seperate start time for every stinking zone
Yep. Once I stopped having to redo connections. Luckily I only messed that up like twice until I read the pvc cement can
nice, beautiful videos! Love them.
is the same water pressure no matter what type of sprinklers you use?
Thank you! Sprinkler and Rotors operate at different PSI
What app did you used for this video
Are seeper valves usually a part of system?
Can I get water line from sprinkler system
are the valves sometimes clustered together (say in groups of three or four)? If so, why is that?
I have the main waterline on the bottom of the hill which shoots up the hill, and the anti siphons at the top. Is that the correct setup? Or does something need to be placed inline at the bottom of the hill? In other words when the anti siphon at the top is off do I need to worry about the pressure in the line going down the hill or does it just remain pressurized and no need to worry about back flow
I think the most important part is that your anti-siphons are at least 6 inches above your highest sprinkler head. I think the concern is more about where your sprinkler heads are relative to your anti-siphons, than where the main line is relative to them.
How do you plant a tree without damaging your pipes? I marked off a square area where I want to plant my tree and use stakes to mark where a head is. I don't know how much space is between the pipes.
I bought a 2007 home and no one seems to know how the sprinkler system was laid out the guy that I was hired to fix a few things with it and replace the controller told me that they can put them in any way they wanted when they built the home.
The irrigation guy that I hired it's not his fault it's the fault of the homebuilder not giving a blueprint of how they are laid out.🤷🏼♀️🤦🏼♀️ so it's very difficult to figure out where I can plant some trees so I guess I will end up digging and if I hit a sprinkler system oh well I guess I'll be fixing it.
I did get someone to serve a part of the area because of fixing a fence so we would not accidentally hit a pipe of some sort but that part of the yard is not going to be affected by a tree
The pipes should be laid in a grid with parallel pattern. The yard has a main distributor as a branch and it's in a hole in the ground with a plastic cap. The grass might covering it. so you might have to use a weed trimmer to cut back some grass. I susjust you were a bathing suit and prepare to get wet. As the sprinklers pop up, place a yard steak or flag marker next to the head. You should get 5-8 feet of dead space in between each head as the pipes are parallel .@@lissam8988
Hi. I had a working system years ago. Got the house stucco and brain was pulled. How do I test the system with or without the brain and how do you reconnect the brain to the zone controls?
The timer, "brain" to your sprinkler system has all the wiring to your irrigation valves, that being said if you know where your valves are, you can simply buy irrigation wire, and wire it up to your timer "brain".
Do I need an anti siphon valve for each zone? Or just one for the entire system? Lowe’s told me I need just one, and then a solenoid for each zone but Tampa codes require back flow prevention.
There are five types of backflow prevention. Your anti siphon valve (atmospheric breaker) really isn't the way to go. Theres not supposed to be back pressure on it . In other words no valves downstream. And has to be 12 inches above highest head. And more...Use reduced pressure device, or a reduced press principle device. Or, in tx still allowed to use the in ground double check backflow preventer. Dont buy the cheezy atmospheric breakers. The plunger sticks to the top and they then dont prevent backflow.
Air gap is another form of backflow prevention. You wont be using that
Now. Where did the previous owner put the back flow valve and cut off?
I'm in the same boat as yourself lol
Me too 😡
I feel weird being 13 years old and loving this video
I'm unable to dig any kind of trench to lay PVC due to hoa restrictions, and am relatively unwilling to mess with timers - all I really need is for the sprinklers to turn on when I turn on the water.
Any suggestions?
Yes, hook a hose to your spicket and a sprinkle on the other end of the hose...
@1:06 how does it talk to the valves? Is there wiring from the control to the valves?
Yes
I'm assuming so, but does the company installing a irrigation system call to get utility lines marked? I wasn't sure how far down the water lines have to get burried.
Yes, the contractor should always call the utility companies to mark their utilities, and not sure what it’s called near you, but we have a single phone number to call that will notify most local utilities, known as DIGTESS here in Texas, and most irrigation systems here are installed 6-12” deep, & deeper in northern climates
Did you use 1 inch pvc for the whole sprinkler system?
This will vary on installation below I have provided an article that could assist
school.sprinklerwarehouse.com/pipe_tubing/how-to-determine-what-pipe-size-you-need/
Do you normally use 3/4inch pipe?
Hello, please review the link below to help determine what size pipe to use.
school.sprinklerwarehouse.com/pipe_tubing/how-to-determine-what-pipe-size-you-need/
Where is the Shut off ball valve to shut your system off if you have to work on it?
"That leaves you with a regular old Plumbus"
I always wondered how Plumbuses were made
This helped
We are glad to hear!
Does a group of three or four valves clustered together have a name?
👍⚾️
i dont even have a lawn. how did i get here
you're bored, that's how!
I do this
Dude looks like actor from American Pie
.
You’re wrong poly pipe is different than funny pipe! Tired of people that take all the tests but know nothing
Omg! Could that guy talk any faster.
??
Too much blue glue on that joint. They WILL leak