Eu amo os sons do desmonte dos componentes... Abraços do Brasil! 🇧🇷
I am digging this video so much. A classy ss build for a rusty old bike that surely was destined for a landfill. Excellent job.
Also you found the right balance of including the right parts to shoot and edit and efficiently condensing several days/weeks of build labor in a tidy runtime. Great work!
Good save! Makin' something out of what's considered junk. Good on ya!
Nice build! 80s and 90s MTBs deserve some love and respect. Just wondering if you have any build details to share? I really like the paint that you used. Reminds me of the color of the race car that Mauri Rose won the 1947 and 1948 Indy 500 with. What paint is that? Also wondering what handlebar that is? What rims and tires did you install?
Good job! Well cared for even in the details. I seem to see me when they bring me bikes that have been thrown away in the courtyard for years and I completely renew them. Unlike, however, I rigorously put the loose spheres, I take photos of the original writings of the bicycle and reproduce them and reapply them so that these details are not lost (a detail I care about very much). But out of these differences you have made a masterpiece I love it even in the details. I also like the geometry of this frame ❤ (too bad it's not disc brakes)
Clean build! Pretty sure you should tighten the stem adapter top cap bolt before the stem bolts on the steerer, to make sure the stem is seated all the way down :)
A quil stem doesnt pre load the head set bearings. so it doesnt matter what order its done in
Great build! Good for another 30 years
Nada más hermoso que armar una bicicleta desde cero!!!
Well shot and edited! I learn alot from you just watching your condensed videos.
I ride a GaryFIsher Genesis that looks a lot like this. I kept the old derailleur but it's blue with the drop bars and brown seats/tires. Dash Bicycle in Providence did it up for me.
Пыльник на переднем тормозе порезан. Одно только порадовало, цвет покраски приятный!
Bel lavoro! Curata bene anche nei dettagli . Mi sembra di vedere me quando mi portano bici buttate in cortile da anni e le rinnovo completamente. A differenza peró io metto rigorosamente le sfere sciolte, faccio le foto alle scritte originali della bicicletta e le riproduco e le riapplico perche non si perdano questi dettagli ( un particolare a cui ci tengo molto ). Ma fuori di queste differenze hai fatto un capolavoro mi piace tantissimo anche nei dettagli. Mi piacciono anche le geometrie di questo telaio ❤ ( peccato non sia a freni a disco )
Nice… but will the rust not come back if you leave him there before repaint job? I always thought it has to be completed removed so that it will come through the new paint.
I have a collection of old bikes, I restore them all myself, they are bikes that are decades old, I always remove all the old paint with paste remover so I don't excessively scratch the frame with a sander. Then I do an anticorrosive treatment on the frame before the new painting. Only when the old paint is well anchored and without traces of corrosion, I don't think it's necessary to remove all the old material.
Painting that frame in that state without taking the rust off was a crime against humanity
Is that front fork bent back a little bit? I guess if it rides fine, it's steel, so it's not an issue. Beautiful build!
2:30 Bruh, respect the torx driver! You need to find yourself a set of real punches.
It looks so good . Thanks for making the video
Very good restoration workmanship and a well detailed video.
Veeery nice build, but i ask myself... what is the point about a single speed gravel bike? Like, wouldn't it it make sense to have some gears, or would you also ride a Mtb without gears?
Very nice job you did. Please do not confuse restore with rebuild. The automobile fanatics at Pebble Beach would make it very clear what the difference is. Once again, nice rebuild with modifications.
I love your style!!👍🏿
Awesome video!!💪🏿
it's ok, vintage Marin mtb frames are very good, only one detail, you should put some sort of shield between the frame and a grass when paint it and hope you were wearing a mask
A gorgeous build! That paint is so niceeee and pairs very well with the tan tires and purple chainring! Great editing on the video too!
Good job and a sweet ride🎉
Clasico 90s I love IT!!!
just perfect
Marin made nice steel frames, good project
Really lovely rebuild. Could you link the parts used in the description? Would like to do a restoration similar to this
У меня тоже Marin, muirwoods.Спасибо производителю.
I would personnally prefere that you keeped the cantilever brake, but it's mostly my hate of V-Brake talking here hahahaahhaah
Nice build!
That was an impressive transformation.
Definitely one of my new favorite channels!!!
Looks incredible
Nice Restauration...but who needs a Single speed Gravelbike 🤔🤷🏻♂️?
It’s not a restoration but a cool project never the less 👍🏼 Nice saddle as well, it probably doubled the value of the bike 😁👍🏼
Nice project mate. I like this 😎👍
Excellent! Great name as well!
I'm curious about the brake levers.
Did they work well with v brakes?
What's the brand and model?
Nice color!
It looks like you didn't mask the bottom bracket threads while spraying, sick vid so far though :)
Nice bar tape !
Absolutely the best way to make money on restoring old bikes is to make YT videos. Because even if you could sell the bike later, it's nothing compared to the monetization of the work. And the bike will not sell anyway.
The wd he put, is unexpected
Do those road brake levers work well with the v-brakes?
Lo dudo mucho, jaja. A ti y a mí no nos engaña con sus trucos, jiji
LOVE IT!
Really inspirational video. AAA+++
Соотношение звёзд вообще убило! Этот велосипед теперь черепаха! Смысл ему было ставить руль баран для аэродинамики!???
Quedó muy bonita,de que color es?
Greetings from the UK. A superb job. Well done sir!
Wonderful bike
👍
Nice build! What is the best single speed gear combination for a 26 inch wheel?
6:55 Is the centerline new or just restored ? Thanks
Greate job btw 😅 ✋
wow amazing
Fantastic video - what is that bartape? ✌️
Great build .. but why a chain tensioner when the frame has verdict drops??
Was wondering the same. I bet so the wheel can set as far back in the "horizontal" drops as possible and you dont have to worry about coming out of tension.. Cause with QR they will. Bolt on they will but just slower. So seating the wheel as far back in the drops as possible and adding a cool purple tension-er you dont have much worry.. Was thinking of doing the exact same thing cause with horizontals it either comes out of tension or starts to vear to a braking side.
good job
А на кой нужен натяжитель цепи при косых дропаутах?
What brand is the bar
tape ? Looks nice 👌
Keep the crispy paint job but put clearcoat
I think could be better with shifting. Still, awesome bike.
There is a ton of rust remaining beneath that paint 😂😂😂😂
Nice restoration although I'm under the impression that it has a bend front fork.
What tyres are they and single speed set up with that dueralliar where did you get the dueralia
Great ! Do you have the reference for the colour ?
Did you stay with 26" tires or got to 700?
Mantap sekali kawan👍
What’s the point of having the tensioner on a single speed?
Were those mini v brakes or standard?
May I ask what respray machine you use as I would like to get one
Neat bike bro
Nice saddle
Глупый вопрос конечно! Но для чего ставить натяжитель, когда диагональный дропаут, которым мы спокойно можем натянуть достаточно цепь!!!! Это лишний вес!!!
Its 26 inc?
awesome
Not bad.
Name of the bike please..
Is that a 26er? If yes then I should try it with my bike too hahaha
Quedo biem pero deberias dejarla original. Es de mayor valor.
Orang indo ternyata ,bang pake frame size 17 bukan? Kalo iya pengen coba tiruin 🤪🙏
Looks like you put an awful lot of new equipment on that bike.
What kind of profit do you make on these restorations?
I’m enjoying the bike so far ua-cam.com/users/postUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA My only real complaints are the brakes and the pedals. I feel like a bike designed for bigger people should have much larger pedals and more heavy duty brakes. I’ve only gotten two really good rides out of it, minimal downhill action, and the brakes feel like they’re already going out. A larger person has more momentum, so I think this wasn’t thought through very well. Also, I wear size 13-14 wide shoes. My feet cramp up on these pedals that are clearly made for smaller feet. Since I’m not a pro rider (and I don’t think many are who purchase this bike) I don’t think that the straps on the pedal are necessary at all. None of this takes away from the enjoyment I get from riding, however. I’ll just head to a bike shop to improve on a few things.
Aro 26 ou 700?
Single Speed Gravel Restoration or how to use all the old parts you have lying around on one bike build.
What is wrong whis the fork?
Pakai ukuran cranck dan cog berapa om?
Tops
he should of put the marin brand on it
Ukuran BB-nya kira2 berapa mm, bang? Saya lagi bangun sepeda 26 utk single speed juga
What's the purpose of that little purple gear that looks like a derailleur?
@@RustBucket_ seu trabalho nessa bicicleta ficou incrível. Mas, acredito que não é necessário tensionador neste tipo de quadro de bicicleta, com gancheira horizontal.
Because of the type of dropouts, you would be lucky to have proper chain tension with single speed. You could try different size rings but a tensioner is better. Unless you have an eccentric bottom bracket (preferred but more expensive)
Peak r/Xbiking
"WD 40 the movie"
Hahahahahahahaa