How to Carry Building Materials with Your Car
Вставка
- Опубліковано 28 жов 2016
- Learn how to make and use my material transportation rails for roof racks and easily carry full 4x8 sheets with your car! I have designed and built simple wooden rails that allow for easy and safe transportation of building materials like plywood, melamine, lumber, countertop, moulding, trim and even small projects. Even if you drive a larger vehicle like a van or a truck you can still benefit from the extra carrying capacity of these roof rails as long as you have roof racks installed.
Check out the new website at www.danpattison.com/
Learn how to make the rails from basic 2x4s and some simple hardware, how they mount and see how I carry different materials. If you've ever wondered how to move smaller quantities of building materials with a car then look no further!
View and submit photos of a DP Shop Talk project that you have built here:
www.danpattison.com/blog/view...
To learn more about the Multi Purpose Table (MPT) or to purchase plans please visit - www.danpattison.com/mptplans/
For general information visit - www.danpattison.com/
For helpful articles and blog posts visit - www.danpattison.com/blog/
Follow DP Shop Talk on Facebook, Twitter and Instagram to stay up-to-date with the latest news and exclusive content!
Facebook - / dpshoptalk
Twitter - / dpshoptalk
Instagram - / dpshoptalk - Навчання та стиль
Occasionally you stumble upon little nuggets of gold on UA-cam and this video fits perfectly into that category. Thanks bro ... 👍
Perfect! So nice to see someone post something useful, professional, well-thought-out and right to the point. Good job!
Just made these for my 2015 Crosstrek and was amazed at how secure my plywood was with only 2 ratchet straps. Great idea!
So you didn't need any "L" brackets in the back? Won't plywood slide out the back?
@@jimm9426I think this is why Dan recommends 1 or 2 sheets at a time. I wouldn't trust the middle sheet in a stack of 3. I'm about to build this for my '15 Crosstrek and am planning to make a couple trips for 5 4x8 sheets, let's see how it goes
Just made these rails for my subaru crosstrek and they worked perfectly! Thanks for the thoughtful explanation and video
That's a great idea to add rails to the side of the loads you're carrying on the roof, I've been thinking about making a sled / bed for the roof rails for my car but this seems so much simpler!
Thanks for sharing it. :-)
Great and enjoyable video. Thank you Dan. I like the idea of the angle irons in the front. It kind of also acts as a measure for safe number of sheets. Flexible and inexpensive also.
Greatful Dan for another one of your creative ideas. I was wanting to build cabinets for my shop, but didn't want to have to carry 15 sheets of plywood in a rental van at once to occupy my whole garage. This gives me the option of buying little at a time as I am building / using material and carry it on my car. Thanks again.
Built these for my 15 Ford Escape and they work great! The only change I made was to use squared U-bolts - drilled the two holes and chiseled out a channel so the U-bolt would sit below the surface of the 2x4. I was able to position them so that the hatch can be fully raised even when 4x8 sheets are up there. Thanks for the video Dan!
This is exactly what I was looking for. Thank you!
A 5 Star Idea!! Thank you so much for sharing !! I have a 4 door sedan and was thinking I'd have to get my sheet lumber precut at the store. Now I don't have to :)
Id love to see how you pack your tools in your car!
Hey Dan, that is well thought out and well documented. Thanks for the idea... gonna build a set for my Prius v.
As someone who also has to use a car (luckily an estate, or station wagon as you know them) for working I would love to see more about your setup. These roof bars are a great idea and if I get a roof rack I will certainly make a pair.
Superb idea. I've been toying with a solution for carrying sheets and mine has been a lot more complex so far. You have inspired me!
as a DIYer and small hatchback owner this is ingenious and appreciate you sharing the details and design
Awesome video and idea..... I'm going straight into the shop to make these right now!
Fast forward to 2022 and you are Still inspiring people. Thanks, Dan. I'm in the process of making mine [just waiting on the U-bolts]. This will save me a fortune in sheet wood delivery costs. :)
2023, checking in. Solid build here. Thanks, Dan!
This was simpler than what I had planned, and it worked beautifully today. A ratcheting socket wrench saves bother putting it on.
What a wonderful idea! So clever and practical. Thank you so much for sharing. 👏👍❤️I think I will make one.
Simple and effective and safe , well done
What a simple, inexpensive but effective setup! Also would not take up a lot of room in the shop for storage when not in use. Thanks for sharing
Common sense, practical and easy to do. Well done. Thanks
This is a very good idea. Little details like morticing the brackets are well thought out.
Thanks Dan. Looks reliable and solid.
Perfect! Gonna do this thanks!
Nice one Dan!
awesome, I've been trying to come up with a way to transport 4x8 sheets with my Outback, and this is one of the most simplistic and effective methods I have seen so far! Thanks for the great idea!!
I'm thinking of getting an outback. Which version/engine do you have? Any good?
get the base model and 2013+ for the timing chain. they had head gasket issues in the mid-2000s but that was mostly resolved around 2009. good cars.
Brilliant idea :) could you please make the video on how you pack your car.... it's always helpful to get top tips on how to carry you gear effectively.
This is really good information. Thank you for sharing.
One of the best reasons to use a regular car to go to the job is that it is much easier to park in busy areas. Great video!
As added feature I mitered the rear ends of the 2 x4 and added wheel casters pointing up & at an angle.This makes sliding sheet goods effortless and scratch free.
That's a great addition 👍
You are brilliant sir! Thank you for this!!!
Great idea!! Simple enough for me to do!! Thanks much!!
Very well made video, Dan. I'm anxious to try that out.
Thanks Dan, I too have a small car & recently fitted a roof rack similar to yours. Your idea would be perfect for my project as I too need to move sheet goods for jobs.
Well conceived and illustrated ... thanks for sharing. Cheers
Thank you Amazing and Safe way to transport! 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
Simple and brilliant. Nice work
This is simple and clever. Thank you!
I had gotten as far as a notched 2x4 but hadn't landed on the galvanized plate as a retainer. I was also considering beveling the front of the 2x4s and attaching an air dam, because I envisioned longer range full time transport of ladders and materials. Its a great simple solution. I will likely do nyloc nuts and 1/4x20 bolts with a phillips head. Lets you use a pair of pliers and drill or impact driver to attach the supports. Plenty strong as fasteners and less wood is taken out with the hole.
Id love to see your setup in the back of your car. Nice video!
This was great. Thank you!
Great design and presentation thanks for sharing!
Just what I was looking for. Very nice!
There are a lot of neat looking projects on You Tube that don't live up to the videos. This one is a real winner, though. I put one together for my Tesla Y for carrying lumber and other materials for my woodworking and home projects. For $20, it works great! The roof rack for the Tesla is pretty nicely finished and has an ellipsoid shape, so I slightly modified the plans by contact cementing rubber strips to the top of the metal strips and the bottom of the cutout in the 2x4's. Great project and excellent video, Dan.
Genius design
Had an unpleasant discovery that, despite my SUV being advertised and sold as something you could add a hitch to, and even promises from the dealership that they would add the branded factory hitch as soon as the company made it available, ... no hitch. Company won't authorize adding factory hitch despite my being willing to sign a liability waiver. This has provided the solid alternative for loads too wide or too long or both. (Have to transport 16' cattle panels soon - even folded over, they don't fit inside. And bonus points - car's just about 15' long so only a small overhang if I build the rails slightly longer than your example. Really appreciate your attention to detail and providing tips like insetting the bolts to prevent scarring the load. Nicely done!
EDIT: Phase one done. We added old sections of bike inner tube to the saddles in the 2x4s - works as antislip against side to side movement, protects the roof rack as well (roof rack bars are curved profile *and* arched upward toward center of the car). Added same as a sleeve over the two upright brackets to protect sheet goods and keep them from sliding around while I'm trying to tie them down. Phase 2 will be adding tie-down mounts along the bottom edge of the 2x4s for bungee attachment points.
Very nice idea and would surely like to see the way you haul your tools too. Thanks for sharing.
This is just what I needed! I have this same car and have been considering getting a truck. Might have to rethink about trading the car in now! Thanks!
excellent just what i needed thank you so much
Thanks for the idea! The 2x4's are too simple to make! Home Depot and Lowes both want $80 for delivery and they are just down the street.
Great job and great video! Thank you!
brilliant idea!
Thanks, Dan! Super helpful.
Awsome man, brilliant!
i tried this out on my roof bars and it's excellent it is safer to espicaly on plasterboards
Thanks. This was really helpful
Frickin genus idea
Thank you! I'm going to do this on my Crosstrek.
this. is. amazing.
I'd love to see your setup on this. I got rid of my truck back in 2011 due to high gas prices and age, and got a small car as I had to commute a good bit. Finding a way to haul LONG and awkward loads along with all the other tools has been an ongoing project.
I did a video about how I packed my tools in the car but I ended up pulling it down due to safety concerns. I bought a mini van with a commercial upfit a couple years ago and use that for my work vehicle. It has a steel cargo divider in it so it keeps all the tools and materials separated from the front seats. My main concern with using the car was that if I was to ever get into an accident there would be nothing to keep all the tools from flying forward into me.
Have you built one of the DP Shop Talk projects? Submit your project at the link below and check out other projects that have been submitted by viewers! Also leave your comments, questions and ideas at the bottom of the page in the comments box.
www.danpattison.com/blog/viewerprojects
a trick : you can watch series on Flixzone. Been using them for watching loads of movies lately.
@Dalton Adriel yup, I have been using flixzone for years myself =)
BRILLIANT!
This is genius!
This is an absolutely brilliant idea, and solves about 250 of my problems. I was considering trading in my BMW for a truck, but this may be even more versatile for my needs. Why would I use my BMW for a work vehicle? Because I *LIKE* the car, and I only care to own one car. Thank you so much for this video!
Hi did you make?
zhifang wang Yes, I took a while to get around to it. I had to modify it a bit and cut the back slots a little deeper to accomodate the slope of the roof on my Subaru Outback and keep the boards level from front to back. I moved sections of butcher block countertop last weekend and it worked like a charm!
@@jonjimihendrix thanks Jonathan 💞
Dan great video best one I've seen out there thanks for the help
great idea. I use the roof rack with ratcheting straps on my van daily. I found some straps that do not have hooks on them. instead the strap is sewn on to the ratchet making a loop. I found these are a big improvement. I don't worry about finding a place to hook the straps and the section between the ratchet and hook is never too long.
+Ryan Kaplan that sounds like a great strap. I'll have to keep an eye out for those. Thanks for sharing the tip.
Ryan,
Are the straps you are recommending like the Lee Valley Fast Straps (No. 99W87.03)?
Thanks!
David K. more like 17F10.02
This was pretty smart. Thanks!
Good idea!
Well done, Dan. Great idea. I think I might do something similar for my Trailblazer. I bet that Clark Griswald watched this video before taking Aunt Edna to Arizona. :)
Great idea
Brilliant! Solves several of my problems?
This is genius, you just made my Volvo into exactly what I need. I have an XC70 and was wondering how best to use the roof rails, thank you very much for this.
What a simple idea and so easy to execute. I was wondering how to get some ply home as right now, with the UK in lockdown, I can't get a delivery and can't hire a van. What's more - my garage door has fallen of its runners - completely shearing the guide bars. Thanks for this - you've saved me a *lot* of effort and expense. Subscribed.
*EDIT* Also, kicking myself slightly for not thinking of it myself. :)
Glad to hear you found it helpful!
great idea
Dude Awesome! Thank you!
fantastic!
thank you very much for the video. the only thing i would change is the direction the bolts are installed. would put the nuts on top so i could use a drill/impact to speed things up, would just need washers, yes, im extremely careful!
This is perfect! It's given me some closure given that you are doing fine with a car that is similar to the size of mine. Thanks for putting your message out there :)
I've actually switched to a micro van as a dedicated work vehicle which is smaller than the car but with a lot more interior space. I use the same system for carrying sheet goods on the roof of the van. If you're interested in seeing that episode I'll put the link below.
ua-cam.com/video/Gt7bK4Dfo5I/v-deo.html
Good stuff
Amazing
Great ideas. So many of us have smaller cars and smaller spaces to work with. It can be a great series of videos...
+Slap Stick I think you're right. I have a video coming up on small shop dust collection solutions and small shop solutions have generally been my focus since I work out of a smaller shop and with a smaller vehicle. I'm glad that you guys find the videos helpful.
Dan Pattison Great! Make sure you see 'Steve Ramsey's dust collection video for small rooms', to avoid any redundancy.
+Slap Stick thanks I'll check that out.
Please make a video on how you have the inside layed out ! Sentence exactly in regards to a roof rack on a suv more efficient than a pickup!
please show how you pack your car
Thanks, I think I'll add tie down hooks on the side for the rachet straps
If you use large-diameter PVC pipe to carry the smaller, more flexible moulding, it would provide support and protection from the elements.
That would work great for moulding.
My hilly Billy style on 4x4 putting 4 screws to lock on the rail and 8 screws on fly board.
good to see that one can do some construction without needing a 60000 truck! I knew you had to be a Canuck....a polite, modest canuck...I love it!
Definitely a Canuck eh! I like to be innovative rather than spending a lot of unnecessary money on something I don't need.
@@DPShopTalk that's the Canadian way!
Hi Dan. Really found this video helpful and intend to do it myself so I can transport sheet materials. My question is: when carrying several sheets of drywall and securing them with ratchet straps, how would you stop the straps from cutting into the boards?
I would make some wooden corners to put under the straps to prevent damaging the drywall.
I am going to implement this on my family minivan. I can fit 4 x 8 material inside if I lower all the seats, but removing my kids car seats every time I want to transport material just isn’t worth it. Thank you for sharing this! Still relevant in 2024.
I don't have a roof rack just a rubber mat. I C clamp sheet goods together at the front and back, using small blocks to prevent goods damage. Then use ratchet straps to secure the A and C pillars to the C clamps.
I pit a heavy queen size comforter directly on my pt cruiser roof and use 4 ratchet straps. Lowes is only 1.3 miles from my home
That's a pretty good idea and an easy build. I don't have a pickup or a mini van, so this will be useful for me.
I would be interested in seeing a video of the setup you have in your car.
+David Caplette I actually had a video posted of how I packed my tools in my car but I ended up pulling it down for safety reasons. After I realized that having all of that weight behind me in the car would be very dangerous in an accident I ended up buying a mini van with a commercial upfit and steel cargo divider.
Dan Pattison ah yeah I can understand. What about the solution in this video, did you ever have any problems with it ? What about police stopping you ? I'm in Quebec, so maybe not the same laws, but it would give me an idea of what I could expect.
+David Caplette no I've never had any issues with the roof rails
nice Idea! always try to fit it in my car... I don't know if we are allowe to use your idea here in NL...
Let me know when you find this out
Brilliant~ Looks great. Sure beats buying an Expensive pick-up truck. When carrying plywood I bring my cordless drill and run 3 or 4 drywall screws through the sheets to keep the load tight.. I know In California you want to be sure and have a Red flag/cloth for projecting materials 4' past the rear.. I hear these racks generally have a weight limit of 150lbs. So I couldn't carry my Mother in Law if I wanted to.. ;)
Well it sounds like you guys all want to see the video showing how I pack my tools in the car so it is now on the list of upcoming episodes! Now I just have to try and get it shot before the snow flies :)
Don,
I thought of two possible upgrades to the roof racks, although my upgrades are probably overkill. (I can't help it; I'm an engineer. )
1. Add heavy duty eyebolts to the bottom of both rails near the ends. The eyebolts should be large enough for the hooks on the tiedown straps. This might make it easier to install the straps, especially on windy days. Hook one end; toss the strap over the car; hook the other end and tighten.
2. Rout shallow notches at the bottom of each end, just a little wider than your straps, to keep the straps from sliding. This idea goes along with Ryan Kaplan's hookless ratcheting straps.
Anyway, I love this idea. Gotta make me a set of these. Thanks!
+David K. Those are great suggestions, I like both of them. The hooks would definitely make it easier to keep the strap in place while getting it done up. Thanks for sharing your ideas!
Wish I could see all of your suggestions. Is there a way to make it all visible ?
+TheRedhawke if you hit 'read more' it will show you the full comment
Would you mind sharing your parts list? :)
thanks, build this
I like your video my friend. Is it possible to carry a 28 inches fiber glass ladder on top of a 2015 Ford Fiesta se?
As long as you secure it properly
Hi Dan, this is a cool video and excellent details (the undercut pockets in the wood and the metallic corners!), helped me a ton to transport some wooden girders from the store back home!
Please, can you give the link for your efficient setup for packing all your tools in the back, as you mention in the 5:19 of you video?
I'm an weekend hobbist, so I only have my hatchback car to do stuff...
I actually ended up taking the video down about how I packed my tools in the car over safety concerns. I don't use my car to move my tools anymore but I do have a Japanese micro van now for a dedicated work vehicle. If you check out my most recent video you can see all about that setup.