Seat Belt Pre-Tensioner Diagnostics | B 2292 Pretensioner | How to Simulate Seat Belt Pretensioner

In this video I show you how I normally test the seat belt pretensioner when I get B2292 fault code. I also show you how I simulate the pre-tensioner just to make sure if the component is faulty or wiring.
Join the channel for more videos and more support:
www.youtube.com/@AutomotiveDi...
You may watch the following video too:
Airbag Simulation & Diagnostics Explained | How to Simulate Airbag:
• Airbag Diagnostics | H...
Finally a Perfect Budget Friendly Scanner for DIY & Pro Mechanics That Can Do Everything !!!
• OTOFIX Lite Review | A...
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.

[@AutomotiveDiagnosis]

You may watch the following video too:
Airbag Simulation & Diagnostics Explained | How to Simulate Airbag:
ua-cam.com/video/Pp-292wi4S8/v-deo.html

[@mikeleyshon1799]

I was working on my 2010 ford ranger and my simple Bluedriver scanner pulled this code for the air bag light. It came on intermittently and I was able to isolate it to a faulty connection to the pretensioner. It's important to me to be aware of any precautions to take when servicing an SRS system and to understand how things I work on actually work ! I learn best by seeing things actually applied so I watch a lot of relevant videos. This by far was the best, thanks for sharing your skill and knowledge !

[@AutomotiveDiagnosis]

Thanks for sharing your experience 🙏🙏

[@Rekani-sq5nl]

Well done for fantastic explanation

[@AutomotiveDiagnosis]

Thanks a lot 🙏

[@juvenalalvarez9535]

You áre great on diagnóstics, thanks for sharing your knowlage

[@AutomotiveDiagnosis]

Thanks for your nice comment.

[@matthecarguy7962]

Perfect Perfect tutorials, thanks

[@AutomotiveDiagnosis]

Thanks 🙏

[@sreeyeshk3974]

Very well explained 🙏🙏

[@AutomotiveDiagnosis]

Thanks 🙏

[@sreeyeshk3974]

Thank you so much 🙏

[@AutomotiveDiagnosis]

🙏

[@Dean-ob7fg]

Wonderful video

[@AutomotiveDiagnosis]

Thanks

[@abhijeetsurve8199]

Very well explained 🙂

[@AutomotiveDiagnosis]

Thank you 🙂

[@abhijeetsurve8199]

Make detail video on how to use oscilloscope & how to diagnosis on scope plz it's my humble request

[@AutomotiveDiagnosis]

Sure thing. My Oscilloscope is broken, but I’m buying one very soon. Will make so many videos for how to use oscilloscope for sure.

[@amarabdelli487]

Thanks for sharing

[@AutomotiveDiagnosis]

Thanks for watching 🙏🙏

[@anthonynicholls8010]

👍👍

[@markconnors3269]

Hi was wondering if maybe you could help me
I changed my seats in my Vauxhall vivaro van 2013
And fitted bmw e60 Lci front seats
Can I use the bmw pretensioners or would you recommend to swap them back to the Vivaro tensioners
Really appreciate any advice

[@orionjones9203]

Could you do the same thing with just unplugging the pretensioner as well shouldn’t it show nothing?

[@mikef124]

Thank you very nice, what's scan tool are you using

[@AutomotiveDiagnosis]

Thanks for watching. This scan tool was Carman Scan but many other scan tools can do very same thing. It’s really depends on the type of cars that you are working on. This scan tool is good mostly on Korean and Japanese cars.

[@abdalgadermohamed5636]

nice

[@AutomotiveDiagnosis]

Thanks

[@japzonerazan744]

Good teching, May I ask question, What is the object you used for simulation?

[@AutomotiveDiagnosis]

Hi There, Thanks for your comment. That's a 2 Ohms resistor. Because the internal resistance of pre-tensioner and airbag is about 2 ohms we can simulate it like this to find the problem.

[@japzonerazan744]

Thank you for the answer

[@user-gf4ev4vu8v]

thanks for the video, i have a question, how did you determine the two wires responsible for the resistance

[@AutomotiveDiagnosis]

The best way is by using the wiring diagram. The alternative is just to trace the wires. There were two wires for the buckle switch and two for the pretensioner, just trace the wires and you will find out.

[@user-gf4ev4vu8v]

@@AutomotiveDiagnosis thank you very much

[@AutomotiveDiagnosis]

@@user-gf4ev4vu8v 👍👍👍

[@user-uj1xg7hb2u]

Is not possible to stimulate the Seat belt pretensioner with Test light instead of Resister

[@AutomotiveDiagnosis]

No my friend. Resistance must be a part the circuit and has to be about 2 ohms.

[@mohunney]

Hi,
What type of tool do i need to use to find out the right amount of resistor to use?
In your case how did you know the tensioner needed a 2.2Ohms?
Can i use a ohm meter?
Thsnks,

[@AutomotiveDiagnosis]

Hi there, normally you can find the value from the workshop manual or scan tool, you see the resistance value in this video when I show the live data. The common resistance value on many make and models is between 1.8 to 2.2 ohms. Also, you should NEVER check the internal resistance of pre-tensioner or airbag as they might get deployed!

[@jeffhong2135]

Can we do this simulation on the airbags too?

[@AutomotiveDiagnosis]

Yes, normally airbags resistance is similar, we can simulate them in a same way but JUST for diagnostics.

[@lilman3213]

How is the buckle released from the bottom unit of pretensioner

[@AutomotiveDiagnosis]

We can’t pull them apart , They should be replaced as one unit.

[@seang7331]

What would be the required wattage of the 2.2 ohms resistor?

[@KL-zt6jx]

Wattage doesn't matter. The current going through the wire is almost zero.

[@saudrahimi520]

Sir please answer my question or if anybody knows tell me, my check engine light is on and it shows that crankshaft position - camshaft position correlation bank 1 sensor A and B so should I change my camshafts sensors or both camshafts sensor and camshafts adjuster , mechanic told me to change camshaft adjuster so I'm confused what should i do my car is c250 benz 2012 please answer thanks. Codes are P0016 and P0017.

[@AutomotiveDiagnosis]

Please watch our video for P0016.

[@temitopeshodunola1254]

Where did you reside?

[@joaopaulocoelho5401]

Is the "simulator" just a common 2.2 ohms resistor?

[@AutomotiveDiagnosis]

That’s correct

[@joaopaulocoelho5401]

Yep... Work like a charm :)

[@seang7331]

​@@AutomotiveDiagnosis what sort of wattage would you recommend for the 2.2 ohms resistor?

[@sreeyeshk3974]

I want your contact info

[@AutomotiveDiagnosis]

Hi there,
This is my email address:
[e-mail]

[@ravigarage8745]

👍👍

[@AutomotiveDiagnosis]

👍👍