Nozzle Spring install and MWS Airsoft Chat: including malfunctions, restocks and hop up
Вставка
- Опубліковано 15 жов 2024
- The stock TM MWS nozzle spring always breaks so its worth knowing how its put together.
Also chatting about malfunctions and a bit about the hop project.
#airsoft #mws #tm #upgrade #fix #repair #repaired #DIY #marui #tokyo #tokyomarui #zet #zetsystem #bolt #nozzle #spring #install #installation #guide
Amazing video, your dedication to the MWS system really provides motivation for me to venture through my 9 inch MWS' internals too.
Thank you, glad I could help you out and a 9 inch mws is awesome, did you see Alex's from the discord video, it's a 7" I think but it's also a 9mm so anything is possible!
literally bought this kit on a gut check as it seemed like it was what I needed, glad I did
A user in the tm discord recently experimented with placing a low friction tape on the inside of the charging handle to make the bolt sit lower and the results looked promising.
They also put some on the loading arms to push the nozzle itself down a bit more.
It seems to fix their issues with the nozzle riding so high that it was clipping into the top of the entry to the hopup chamber.
Great info!!! Thank you!
Grear video! I'm still running stock Nozzle R. Spring but have the DP on standby ready to drop in now. Excited to see more about the hop up stuff though, I'm testing some combinations this weekend.
oh nice, the biggest issue is managing to bed the hop in before testing, the whole process is really time consuming. good luck and id really like to know how you get on too, what will you be testing?
@@OllieTalksAirsoft Yh definitely, I've run a couple mags through it on full-Auto to "warm" it up with the hop slightly over adjusted, then reduce hop on semi until it is consistant. Got a mixture of bits to try like ML Omega nub and the Laylax arm with a couple different buckings (Stock,TM, Prom.P and ML MR) Heard alot about each set up and thought i'd try see what the difference is in them.
Stay beautiful ollie. Another good video.
😊 thanks buddy
Great video, thanks for sharing your wealth of information. Liked and commented to help support you :)
aww thank you, I didn't realise before but it really makes a big difference, much appreciated buddy 😁
Great video as always Ollie, thankyou for sharing so much info with the community. Interested to know what your muzzle velocity/joule output is on the clip at the end of you testing the firefly blue bucking?
Hey Ollie,
just wanted to make my gun work reliable on green gas so I only need the set with the springs on the left side right (already bought that)?
The spring is a drop in, as shown in the vid? Pins out - change - pins in?
The other parts are for filling a new bolt did I understood right? 😅
Thank you greetings from Germany!
Josch
Yeah that's right, pop the 2 pins out and swap the spring
@@OllieTalksAirsoft Thanks and have a nice day ☺️
you too buddy 😃
Hi Ollie, my friend has a new tm mws, its doing something really strange, bbs fly lovely on auto but its like it has too little hop on semi? Any advice much appreciated.
Only mods are a nub and prommy barrel
Another good video. You might want to check the power output when using the DP Valve Blocker, it caused a noticeable drop in joules compared to the stock one.
Oh, to be honest I've been focusing more on the feeding reliability recently and haven't focused too much on the FPS, good shout, I'll make sure I keep that in mind.
I sold all my airsoft stuff a while back when found out the gf was pregnant but looking to get back into it now, not sure if i want mws, last time i had akm and loved it
Just watch back some of the videos you made, I found out that I followed you for over a year lol. Anyway looking forward to seeing your hopup experiment.
Speaking of which my hop-up set in both of my MWS are Laylax hop-up chamber and their hop tensioner, with UNICORN hop-up bucking, the reason being a combination of Laylax hop-up chamber and their tensioner is almost like a TDC hop system and it sounds great for me. So I really do recommend you try the Laylax hop-up chamber and see if you can come up with a very good result with this hop-up chamber.
Subscriber number 107 how lovely to hear from you 🥳 but seriously THANK YOU for your continued support, you always have insightful comments, some of which I can't even respond to as you put them so well.
ill follow your advice and pick one up, the pound is terrible at the moment so its quite expensive but in search of the best results it certainly sounds like its worth a solid look, thanks for the tip 😁
Ow waiting on my 2nd nozzle return spring after almost 3 years of use not too bad I’d say
Yeah I'd say that's a bloody good showing!!
@@OllieTalksAirsoft definitely although I’m glad this time the nozzle just moves freely
The first one was a nightmare to do as the nozzle stuck out keeping the rear of the bolt still in the buffer tube 🥴🥴🥴
A simple question. What is your thoughts on hao convertion kits? I just got my hk416N kit for mws. Still waiting for the rest of the parts to complete the norwegian assault rifle. Love your videoes by the way, they are very helpfull as they answers my questions
I think they're too expensive and I wish TM would come out with a 416 for us all to enjoy, that being said, do I want one...HELL YES they look amazing and the quality of some of the kits out there kind of justifies the price but still, some are over £1000 which is excessive. it want the whole gun for that!
Holy moly, that clip at the end has crazy range, and such stable flight! When you say T8 tensioner, are you talking about the arm or the nub? (Or maybe both?) Im currently trying out different combos of arm/nub/bucking and have the black and blue firefly buckings with a SixG brass nub on the way.
As always, cheers for the effort you put into your videos and bringing more knowledge to our lil GBB community :)
Just the tensioner with the stock arm to get those results.
Useful videos
Ollie, thanks for the vid mate. Good info here. Question...what is the black thing you rested the pieces in when hammering in the pins?
It's like a bench block I think.
@@OllieTalksAirsoft Thanks Ollie... A quick Google shows that's exactly what it is. I've tried getting the pins in without one...nightmare!
a good trick is to use some tape and tape the part down and that gives you a free hand to steady everything.
What a lovely bloke…. Hope your health is improving bud
I put in a WII Tech 160% and I'm getting a really 'Springy' sound when the gun cycles. Don't remember it happening before
I think the Wii Tech is the only one I haven't tried 🤣 weird tho ive never really noticed any springy sounds from the nozzle but ill keep an ear out.
Put some grease on the new spring it will take away the 'twang' of the spring
Hi! I’ve just bought the dynamic precision return spring set - only with springs… Can i modify it and reuse the original “piston head” that’s attached to the spring? Or do I need the full set?
You can chop and change as you wish as the parts are interchangeable
Hello man. A little off topic from this video, but I find myself turning to you for this question:
Have you had experience using inlet valve o rings on your magazines as to not leak gas when filling?
It is my experience, that with most nozzle on gas canisters and especially the Madbul propane adapter, that it takes ages to fill my magazines when having these o rings installed.
I thought of poking them out, but the nice thing about having them there is that since it does not spill excess gas, it takes a lot more effort for it to freeze the nozzle if I hold the fill for too long.
I feel like some different brands of gas filling faster than others. Have you ever tested something like this? Or should I just remove the o rings and accept gas spillage?
If it's TM mags then remove the o-rings and accept some spillage, and if it's mws mags then use the tilt method to make sure they're properly filled!
@@OllieTalksAirsoft alright thanks
@@OllieTalksAirsoft So I believe my O rings have somewhat ruined the fill valves combined with my pressuring the cans very hard into them for about 6 months.
I want to buy new valves with tubes ready assembled if thats a thing. Would I look for STOCK MWS fill valves or are there any "Upgraded" fill valves from third parties I should know about?
Great video! I’ve just changed to an eagle 6 return spring and a dynamic precision reinforced nozzle but now it’s just dumping gas and I can’t work out why, any ideas would be great
Sounds like the rocket valve isn't closing properly, check it has full sprung movement and that it isn't sitting too far backwards in the nozzle
Thank you so much Ollie! You were right the valve wasn’t in properly she’s now running perfectly!
no worries buddy, glad its working again!
Please make a video of the results from a ice pick purple flute valve installed in the MWS
I need to get on first but its on my list, hopefully soon but im trying to buy a house at the moment so am kinda skint 😬 wish me luck 🍀
Hey Ollie, what’s your trick on removing the pin for the nozzle return spring?
A punch is the best thing to use, I've used Allen keys before and given them a smack with a hammer
@Ollie Talks Airsoft, I have got a tm mws block 1 and love the way it shoots. There is 1 thing though. I want to put a mk16 front handguard on it but don't know which should fit and if I need extra parts like a different outer barrel or adapters. Do you know of a good brand that fits and is available? And if I need extra parts, do you know what to get?
I bought the tm after watching your video's. I wanted either the ghk m4 or the tm mws and am glad I bought the mws
me too its an awesome platform, so ive not got hands on with the actual TM Mk18 best bet is to ask on the TM discord group as I don't want to tell you anything incorrect.
@@OllieTalksAirsoft thanks for responding. I asked in the heavy recoil discord group and they told me that I should get the HAO mk16 for the mws. That has the best price to quality I could get. The others like angry gun or z-parts are too expensive for the same result in looks and quality. Only thing is that I haven't found a place where I could buy it. Still looking
its probably worth just sending HAO an email, if there's demand for something they'll do it as they're only a small company. what's the worst that could happen 🤷♂️
HAO
HI again :)
Just wonder where does the o-ring go?
It goes on the back of the nozzle spring end part. When you put the nozzle together it'll have a rubber stopper on the back end with a silver bit poking through, the o ring goes on the silver bit before you put it into the bolt carrier.
@@OllieTalksAirsoft hm... any chance of a pic.?
Email me and I'll get a pic sorted for you
Hi mate sorry to bother you what hop rubber would you recommend in a stock MWS
The stock rubber is actually great, you may want to consider just changing the nub to a brass one and you'll be able to hop heavier BBs giving you way more accuracy and reach
Ok thanks mate I have ordered a laylax hop arm but I’ll try that with a stock robber I don’t suppose you know who has brass nubs in stock do you
not sure mate id just be googling SixG Brass or MWS brass nub, see how you get on, someone must have one in stock and at least being tiny the shipping will be cheap regardless of where in the world you live.
@@OllieTalksAirsoft cool thanks im in leicester so ive got a sig one coming from leadfoot
nice and easy 😎
Just got the Eagel 6 Tech BCG Nozzle Return Spring 150%. Any idea if it roughly works? I will update you on it
It should work fine, but yes let me know if you have any issues id be interested to know
@@OllieTalksAirsoft Will do! Keeping the stock on in for the moment until I have reason to swap it out. It's (for me) real faffy to get all the parts to drop in correctly one after the other when they should. When your not sure how they go in. Your videos and the TM instructions are helping build my confidence to take to bits to learn the system.
I was the same so don't worry, the more you do it the more you realise not much can really go wrong but that said ive messed up nozzles, you soon realise as it just wont work and you just dive back in and give it another go.
If you can't find the stock TM MWS mag lips, what other brands are just as good?
T8 ones were ok and I modified some SAA ones from a P-mag to fit and they work fine too, ive not tested any others on a standard TM MWS mag tho
Hello ! Sr ! Great work on all this videos you make ! Thx they are really helpful… can you recommend me websites where I can buy parts for may TM mws m4A1 ? Pleas ! I am from Orlando USA
JK army, KIC Airsoft, WGCshop, Rainbow8, ehobbyasia, shootercbgear, firesupport and to be fair evike even. they all ship to the US and obviously evike is in the US. great choice of platform for the US, if your field limits are higher a longer inner barrel will see you hitting 400fps in no time with crazy range and accuracy
so nice :D
i changed my nozzel spring to the 150% and had double feed issues was very frustrating
which one did you use? that's weird tho!
@@OllieTalksAirsoft Guns Modify 150% also found alot of vibration through the rif
Damn. If this video popped up maybe 2-3 weeks ago I could’ve saved $30. I let a shop do my nozzle upgrade.
aww dammit, sorry bud. they may have put the rubber bit in for you though as I always manage to damage the spring doing it so just don't bother any more and as I said in the video its never caused an issue.
Is an npas needed in a mws
Only if you want to change your FPS on the fly.
Literally just upgraded my nozzle return spring this evening lol
Hey mate let me know when your free next and if u could send me your address, so I can get my buffer sorted lol
sorry its been so hectic, im literally trying to buy a house its a nightmare, im really hoping it can be done by Tuesday so ill be free after that, sorry ive been letting you down on this
@@OllieTalksAirsoft hi mate no worries at all just let me know when your ready 🤙🏻
if only jk army postage wouldnt suck so much :|
this is very true, although for small items they've been alright in the last 2 months TBF. but yeah overall sssssslllllooooooowwwww
what gas is recommended for the tm mws mags or mags in general
Green gas between about 12-25degrees. Black or red gas under about 10-5 degrees
@@OllieTalksAirsoft 134b or 144b
They're the same 144 is less damaging to the environment than 134
Hey ollie whats your opinion on the gunsmodify re inforced return nozzle? 🤔
Cheers mate.🫡
Yeah it's pretty good to be honest, guns modify are one of the better aftermarket manufacturers
@@OllieTalksAirsoft good stuff ill go ahead and grab it from my usual store, its all i could find in canada atm lol 🤔
Cheers!