How to install soft foldable truck bed cover - YitaMotor tonneau cover mod setup & review.
Вставка
- Опубліковано 24 січ 2023
- You can find tonneau cover used in this video here: www.amazon.com/s?k=Yitamotor_...
(this is Amazon affiliate link)
Installing process is fairly simple and shouldn’t take more than 15 minutes. First, place it all the way in front of the bed. Release safety buckles. Next, unfold the cover and align it with the truck bed. Make sure it is symmetrical and sits properly on all four sides.
Once you do that, carefully fold it back without moving it.
Attach front clamps to the bed rails. Depending on your particular vehicle, you might be able to attach the clamps directly to the rails. But if it doesn’t work, use included mounting blocks. Slide them into the rails and then attach the clamps. There are 3 different positions for the clamps. Tighten the clamp knob.
There are also two more safety clamps. They attach directly to the rail and will prevent the cover from flying off, in case the main clamps fail or get loose. The clamps in the back attach in the similar manner, but they have handles instead of knob for quick operation. You can also use the foam strip to seal the gaps in the tailgate, to make your bed more water resistant.
#truckbedcover #tonneaucoverinstallation #yitamotors #truckbed #tonneaucovers #toyotatacoma #tonneaucovers #tonneaucovered #tonneaucoverstyle - Навчання та стиль
You can find tonneau cover used in this video here: amzn.to/40QVNkF
(this is Amazon affiliate link)
I am so grateful for your video! I installed my Yita cover on my Nissan Pro-4xx this afternoon and struggled with the very easy paper directions when it came to the clamps. I decided to go inside and find a UA-cam video on the installation on a rail system, and found this video. Quick, simple, to the point. Thank you for making this video!
Glad to help!
Looks nice.
Ain’t bad at all. 👌🏼
I bought one of these used and the first set of clamps go right on but I think I could benefit from the mounting blocks for the ones closest to the tailgate but they weren’t included. Any idea where I can get a couple? I have searched Amazon but no luck. Thanks!
Thank you so much, I myself really appreciate the videos that are this helpful and to the point. I bought the same cover for my tundra and this helps me understand completely. Thanks again. 👍🏾
Im glad it helped!
Is there enough weather stripping to help when it rains? Just ordered mine
Mine is still getting water in what can i do
I just tried to put this on and I can't get the back clips to go on properly and the silver hinges it comes with if it doesn't fit your tail gate correctly won't slide all the way to the back. im almost thinking im gonna have to return this im so irritated with it already. spent 15 mins just tryna get the first one locked down correctly and then the second one and now the first one is coming off.
OMG I have the same problem!!! What did u do
Looks nice dose the materials flop when go on the freeway
Very little movement when compared to roll-up ones, cuz it stretched over the metal frame, and that frame clamps securely to the truck bed.
I was curious about the flapping at high speeds too. Last one I got was a different brand and it was horrible. made all kinds of noise on the freeway. Thanks for the info.
My question is how do you adjust it so it doesn’t flip up?
Use clamps to keep it down.
They suck, can't keep mine straight on the truck. Keeps shifting and the clamps are garbage.
Yup just installed mine and it doesn’t fit straight and yes the clamps are cheap 💩
Those safety clamps aren’t very sturdy.