Gary so here's a question you mentioned in your video that with a 3 kilowatt laser you can only cut 3/4 of an inch thickness..... in the future video can you illustrate cutting thicker material and multiple passes and show us the results.. just for that odd job that really doesn't need that Precision .. for example you need to cut some 1 inch thick brackets and precision isn't really required but you need to make them.. quickly... and use what you got in this case only at 3 KW laser
thank you so much I have some questions please Does the same permanent license code activate the cypcut , if i install the card in another computer if first computer damaged , or does it need a new permanent license code Also what about dongle for cypcut it come with fscut 2000c or no . just permanent license code to activate cypcut forever
hi mate, I am based in Australia. Thinking of buying a laser machine from international or national market. do you have any recomendation about tube cutting machines?
nah dawg, thats not true, if you have a good pierce routine, decent cut height, and worse case you can defilm... no problems cutting it, it just wont look as nice as cold rolled or HRPO sheet
Looking forward to our install! The fact that you don't hide any issues as you run into them is why I felt really confident about our purchase.
Thanks Ken, yes, look forward to getting your machine installed!
Nice video! Could you share the layer tweeks?
thanks for sharing even the problems you encountered
yea, of course, always some little issues to work through.
How much does the 3kw Oree Laser cost?
Great video! We have several places In Mississippi with highly technical people. We are very friendly too
Oh yea, what company?
Are you using Air as your main gas for all thicknesses in mild steel?
Thanks for very useful content, do you guys happy with that Rocky air compressor so far?
Is this the FH version? What is the power of the drives in Y and X?
Hi there. What is your feedback on this brand? Is it worth buying?
could you pls make an tutorial video about how to use this and important parts
Gary so here's a question you mentioned in your video that with a 3 kilowatt laser you can only cut 3/4 of an inch thickness..... in the future video can you illustrate cutting thicker material and multiple passes and show us the results.. just for that odd job that really doesn't need that Precision .. for example you need to cut some 1 inch thick brackets and precision isn't really required but you need to make them.. quickly... and use what you got in this case only at 3 KW laser
thank you so much
I have some questions please
Does the same permanent license code activate the cypcut , if i install the card in another computer if first computer damaged , or does it need a new permanent license code
Also what about dongle for cypcut it come with fscut 2000c or no . just permanent license code to activate cypcut forever
what is the peak power consumption of this 3kw fiber laser?
hi mate, I am based in Australia. Thinking of buying a laser machine from international or national market. do you have any recomendation about tube cutting machines?
how model do you buy?
I'd like to have a fiber laser. Need to finish my shop though. I'm in northeast texas
very cool - hope to have one of these soon
Ready when you are!
Do these lasers have a port for optional down draft fume extraction?
they come with ventiliation / extraction passages down in the machine, a 9" exhaust port on the rear, and a 3ph fume extractor.
Great video
hello!, can you tell me where to buy the high power magnets?|
lots of places, amazon, ebay, many others
Good technique of installation🙌🏻.. if any need help from india ..please contact us .. 😊
How many Kw the laser fiber this machine?
Oh man, come on now, I mentioned that at the very beginning of the video
When you have an unlimted budget its easy to pull the trigger
No one has unlimited budget. If you have the right mindset, you can easily transition to this level, if you don’t have the right mindset, you won’t
nice 3kw machine,, never used rusted sheet,, it effects the cut quality and destroy ur consumables
nah dawg, thats not true, if you have a good pierce routine, decent cut height, and worse case you can defilm... no problems cutting it, it just wont look as nice as cold rolled or HRPO sheet
@@turbocobra yes nothing can stand in the laser face, with right config u can do anything that's totally true