just did this to my wii, this video was very helpful! IT LOOKS SO SICK NOW!!! one thing i would say to people doing this themselves, when taking apart the wii a small square nut popped out, and its there to hold the screw in place for the clock battery. if you don't reinsert it, the screw will have nothing to tap into. just something to keep in mind before re assembling. i also left out both rf shields and everything still fits snug, and i have 4 extra screws because no rf shields. lovely video, and lovely result!
I’m thinking about doing this I looked on eBay there is a wide variety of them. I noticed that they had a clear blue case, and it instantly brought me flashbacks to the offbrand GameStop, Wii remotes I think I’m just gonna go clear black
Tip for taking apart and not messing it up is draw a simple copy of each side u are removing screws from on a piece of paper and tape screws on every screw location. It may take a little longer but when reassembly comes it’s super awesome to kno and not depend on memory alone. I just installed the ave hdmi port on a Wii and used a dark clear shell. Looks awesome below my TV
How good is the quality of this shell? I saw some people have problems with the GameCube port doors and the front panel on other brands. How is that on this brand?
I was well up for doing this until I watched the video. Looks a bit involved for my skills. I've done a PSP front shell and a GBA shell swap before but this looks like it has a lot more steps. Anyway, obrigado pelo vídeo.
Hey! The Nintendo wii is not very repair friendly, but not impossible for shure! Give a shot, slowly, with a couple pictures to help u re assembly and u can do it! 💪
Boa noite excelente vídeo e parabéns. Mas tenho um duvida vc retirou as placas metálicas de ambos os lados pra ficar mais exposto a parte interna. Essas placas seriam dissipadores ? a falta delas não lhe implicou problemas depois de algum tempo de jogatina ? Vlw
Obrigado!! Não, neste caso não funcionam como dissipadores apenas como “protetores “ . Não tem qualquer problema remover. Costumo fazer isso em vários consolas sem problema. :)
@@fabiofontes A parte da Dust cover pra não entrar poeira pela frente ( tipo de tecido) você usou a antiga branca ou usou a transparente? Eu percebi que a case transparente nova vem sem essa proteção pra não entrar poeira .
Well… its a pain in the ass because of the bolts, theres a lot.. But if you take pics of the process you should be good! Or follow the ifixit tutorial…
Thanks to PLAYS.ORG for the support on this video!
I had no idea people even made replacement housings for the Wii. Awesome stuff!
Absolutly!!! Me neither! It was a surprise when they send me that 😂😂
just did this to my wii, this video was very helpful! IT LOOKS SO SICK NOW!!! one thing i would say to people doing this themselves, when taking apart the wii a small square nut popped out, and its there to hold the screw in place for the clock battery. if you don't reinsert it, the screw will have nothing to tap into. just something to keep in mind before re assembling. i also left out both rf shields and everything still fits snug, and i have 4 extra screws because no rf shields. lovely video, and lovely result!
@@kianr2200 thnks mate!!! Yeah… with RF shields out some screen Will be left :)
Absolutely spot on video, got stuck halfway through mine watching a different video and you saved the day 👌
Thanks a lot man!!!
I give this a out a 7/10. A little too much crystal or acrylic for me. But still pretty kool over all
Yeah… I may agree… But looks cool!
este video es oro. muchas gracias!
Gracias!!!!
nice tutorial
Thnks !! :)
Boy I thought this would be a quick swap, looks like I should work on it in chunks lol
Yeah… Not super easy… Wii its quite complicated… but not very hard just complicated with too many bolts 😂
You know… I was going to buy a beat up Wii and replace the outer casing. I think I’ll buy a decal and slap it over the scratches 😂
🤣🤣🤣🤣🤣
I’m thinking about doing this I looked on eBay there is a wide variety of them. I noticed that they had a clear blue case, and it instantly brought me flashbacks to the offbrand GameStop, Wii remotes I think I’m just gonna go clear black
Clear black will look good too!! :)
@@fabiofontes 👍
Thats alotta work for a wii tho idk 🤔😆
Yeah… not the easiest… but you can do it :)
Hey bro do you know how many screws to put on the casing to complete it? And which ones
Hey! what do you mean? :)
I want to get this done to mine, now that I've finally modded it properly....15 years later lol
Ahahha :) this was on my list for a long time but its done! :)
Tip for taking apart and not messing it up is draw a simple copy of each side u are removing screws from on a piece of paper and tape screws on every screw location. It may take a little longer but when reassembly comes it’s super awesome to kno and not depend on memory alone. I just installed the ave hdmi port on a Wii and used a dark clear shell. Looks awesome below my TV
Yeah thats a good tip. I use it sometimes … 💪
excellent
Thbks !!!
How good is the quality of this shell? I saw some people have problems with the GameCube port doors and the front panel on other brands. How is that on this brand?
Its quite good but yeah not gonna lie… the port sometimes dont work as it should… :)
Excelente vídeo amigo, vou sem dúvida comprar uma dessas shells para mim! Obrigado 🙌
Obrigado!!!! 💪💪💪
Tens aí em casa um cantinho de sonho parabéns 👌
Obrigado!!!!! 💪💪💪💪 Também é gracas a voces que veem ca apoiar!
@@fabiofontes Hora essa . É bom ver como te dedicas a esses projetos 😉
What’s the grey stuff you put on the circuitry?
Hmmm are you talk about thermal past?
I was well up for doing this until I watched the video. Looks a bit involved for my skills. I've done a PSP front shell and a GBA shell swap before but this looks like it has a lot more steps. Anyway, obrigado pelo vídeo.
Hey! The Nintendo wii is not very repair friendly, but not impossible for shure! Give a shot, slowly, with a couple pictures to help u re assembly and u can do it! 💪
Im torn between the transparent smokey black one or the transparent blue one.
Hmmmm ! Blue one will look awsome! :)
Boa noite excelente vídeo e parabéns. Mas tenho um duvida vc retirou as placas metálicas de ambos os lados pra ficar mais exposto a parte interna. Essas placas seriam dissipadores ? a falta delas não lhe implicou problemas depois de algum tempo de jogatina ? Vlw
Obrigado!! Não, neste caso não funcionam como dissipadores apenas como “protetores “ . Não tem qualquer problema remover. Costumo fazer isso em vários consolas sem problema. :)
@@fabiofontes A parte da Dust cover pra não entrar poeira pela frente ( tipo de tecido) você usou a antiga branca ou usou a transparente? Eu percebi que a case transparente nova vem sem essa proteção pra não entrar poeira .
@@fabiodesouza8006 não trás… e não consegui aproveitar a velha…
Sounds like we have a brother in arms with sinusitis. welcome to the brotherhood
😂😂😂 Sometimes ahahahha dependes on the time of the day i made the voice off 😅
Just bought the shell from Taobao $10
:)
Does it run fine without the cd drive cover?
Yes … :) no problems
@@fabiofontes ok wow I will have to remove the metal from mine it looks so much nicer!! I didn't know you can do that
@@anthonyreieo7231 yes it looks for shure!! :D
@@fabiofontes do you know how many less screw I will need or not sure?
@@anthonyreieo7231 not shure... :)
In scale of 1-10 how much difficult it was? 😅😅😅
Well… its a pain in the ass because of the bolts, theres a lot.. But if you take pics of the process you should be good! Or follow the ifixit tutorial…
💪