I'm helping an owner of a 1947 Beech Staggerwing model 17. It has the Pratt & Whitney R-985-AN-1 "Wasp Junior" radial engines which are extremely reliable. Right now we are working on the retractable landing gear because this plane belly landed back in the late 1970's and it has been in pieces in a hanger since
"You wake up dead in the morning" Now that's an interesting concept. Bout lost the coffee on that one. I'm liking this little bird. These 20 inchers are pretty niftly. Small but a good size to see and do stunts with. Reasonably priced for the Bidenomic challenged. Looking forward to further flights and unboxing of mystery planes. Thanks for making a good morning better. Best to the families Russ NC/USA
This airplane is really scaled out nicely and looks beautiful in the air, but there are some issues, you have to be careful putting the battery all the way forward in battery compartment, the wires for the speed control are just laid in there and it's easy for the speed control to become disconnected from the motor. Ask me how I know. The other issue is the transmitter is complete junk, it will only let you fly in beginner mode and it seems like the gains on the gyro are out of wack. I was able to get it back on the ground but barely. I fixed this problem by removing the gyro and receiver and installing a micro FLYSKY receiver and binding that to my RadioMaster TX16S version 2 transmitter. After playing with the rates and expo this plane looks so sexy in the air. I added a single servo lead from the ESC to the motor and taped the ends to prevent any future issues....
New Stagger Wing Beechcraft? It's like Kick Ass Rock and Roll.😎🎵🎶🎸🥁🎹. Love those complete kits, I bet it makes a fun trainer sport flyer..as always the P-Bros hit a home run.😎👍
Very cool little beach craft 😊 Always nice to wake up on Saturday and see my favorite brothers doing unboxing Can't wait to see her fly and also see your big staggerwing
I couldn't agree more it is the greatest hobby in the world. Brought to us all over the world by the most entertaining brothers in the world. My name is Dana I am a Canadian in the province of Alberta. I fly nitro planes. Thinking about trying e flight models especially EDF. Have intentions of building an EDF version of the AVRO arrow CF 105 which was built and scrapped during the 1950s. Have obtained a set of actual plans for the Arrow. I would love to be able to come over there and fly with you guys and have a great day with you guys. Thanks for your videos
I'm impressed with the closed loop rudder linkage, and the sexi scale detail, great for such a small plane. This will be good fun to fly! Big salute as ever from London. ⭐👍
Thank God I didn't wake up dead in the morning😂 so I could watch this new unboxing video! Looking forward to the flight video! Captain Robert, don't risk nothing, maybe captain Blaž fly this plane, the transmitter sticks are really small...(that is what she said😊😂) All the best ! Patrick
If I was still doing a lot of flying this would be added to my large fleet 👍. Well over 50 planes with the small ones being my favorites 💗. This Old Man from Washington NC do love me some Brothers and Alina ✈️🧔💝💝💝
This little staggerwing looks very sexy and like good quality! 😃👌👍I think it`s maybe possible to bind the plane with an multiprotocoll transmitter. XK is mostely using Futaba FHSS protocoll for the rc planes and helicopters. That would be great with even the expo and all that stuff 😉 I´m looking forward to see this baby in the air! Big Salute to you! 🙂
I don't think it's a Futaba protocol, I tried binding it to my Radiomaster TX16V2 transmitter using all the protocols available and none of them worked. I took out the provided receiver and gyro and installed a micro Flysky receiver. It flies really well even without a gyro.....
If only they would get rid of the two bad things about this plane and sell it as a BNF so I could just use my own transmitter and gyro setup. Other reviewers have not been happy with the included gyro setup. I think these will bind to transmitter that can do FHSS protocol.
Looking forward to the flight video. Lights all over that plane! I've seen some reviews on this plane already and it seems to fly OK in 6G mode (like Safe) but not so much in 3D mode. Let us know how the assembly process goes. Easy or pain in the ass? 😅
I have a question regarding on how to assemble it with the servo connector, as you can see there are 3 holes there in the tail rudder and the aeleron, which hole should I choose to put the servo wire or steel to steer?
This aircraft is nice ... but ... sadly its electronics do not allow binding with other transmitters. It even has a S-bus port too but, unfortunately, it's non-functional.
I'm helping an owner of a 1947 Beech Staggerwing model 17. It has the Pratt & Whitney R-985-AN-1 "Wasp Junior" radial engines which are extremely reliable. Right now we are working on the retractable landing gear because this plane belly landed back in the late 1970's and it has been in pieces in a hanger since
The red one is coming in for a landing on my porch!
This looks like a promising little plane to click on.
Love, it's gotta giro!!
"You wake up dead in the morning" Now that's an interesting concept. Bout lost the coffee on that one. I'm liking this little bird. These 20 inchers are pretty niftly. Small but a good size to see and do stunts with. Reasonably priced for the Bidenomic challenged. Looking forward to further flights and unboxing of mystery planes. Thanks for making a good morning better. Best to the families Russ NC/USA
The Best Hobby in the world brought to you by the Best Guys in the World ✈️🏆🛠️♥️
This airplane is really scaled out nicely and looks beautiful in the air, but there are some issues, you have to be careful putting the battery all the way forward in battery compartment, the wires for the speed control are just laid in there and it's easy for the speed control to become disconnected from the motor. Ask me how I know. The other issue is the transmitter is complete junk, it will only let you fly in beginner mode and it seems like the gains on the gyro are out of wack. I was able to get it back on the ground but barely. I fixed this problem by removing the gyro and receiver and installing a micro FLYSKY receiver and binding that to my RadioMaster TX16S version 2 transmitter. After playing with the rates and expo this plane looks so sexy in the air. I added a single servo lead from the ESC to the motor and taped the ends to prevent any future issues....
Tomorrow might be to late !
Well said my friends .... Well said .
New Stagger Wing Beechcraft? It's like Kick Ass Rock and Roll.😎🎵🎶🎸🥁🎹. Love those complete kits, I bet it makes a fun trainer sport flyer..as always the P-Bros hit a home run.😎👍
Cant wait to test it my friend.
@@PetrincicBrosRC 😎
I really must try to get back into RC flying again, and I blame you guys 😁
Yes, do it 👍
What a great start to 2024, Blaz and Robert. 😂 Great video.
Very cool little beach craft 😊 Always nice to wake up on Saturday and see my favorite brothers doing unboxing Can't wait to see her fly and also see your big staggerwing
I love it. Will also bring down bigger version for filming.
XK makes some really nice stuff! I have had a few, very good!
All by now were great birds and a lot oif fun to fly.
Can't wait to see how well it flys ....at the moment in the uk the wind is so bad , nothing can take off
We also have snow now here and so cold weather.
I couldn't agree more it is the greatest hobby in the world. Brought to us all over the world by the most entertaining brothers in the world. My name is Dana I am a Canadian in the province of Alberta. I fly nitro planes. Thinking about trying e flight models especially EDF. Have intentions of building an EDF version of the AVRO arrow CF 105 which was built and scrapped during the 1950s. Have obtained a set of actual plans for the Arrow. I would love to be able to come over there and fly with you guys and have a great day with you guys. Thanks for your videos
Really nice staggering airplane a really unique airplane oh yeah thanks for the review
Great review as always lads as im having my coffee from Nathan here in Ireland
I just bought one of these through your link!
Hello friends a little late have a great 2024. Happy flying to all from Buenos Aires Argentina 🇦🇷
What a cool little aircraft thanks for showing everyone such a joy to watch you guys and the passion you share with us all ❤
It looks awesome.
Looking forward to watching this, this evening, best RC channel, expertise, humour and Friendship all rolled into one.😊
Thanks for support Peter.
I'm impressed with the closed loop rudder linkage, and the sexi scale detail, great for such a small plane.
This will be good fun to fly! Big salute as ever from London. ⭐👍
For such small bird its really sexi done.
Thank God I didn't wake up dead in the morning😂 so I could watch this new unboxing video! Looking forward to the flight video! Captain Robert, don't risk nothing, maybe captain Blaž fly this plane, the transmitter sticks are really small...(that is what she said😊😂) All the best ! Patrick
hahaha finally you are using the DJI microphones again!
If I was still doing a lot of flying this would be added to my large fleet 👍. Well over 50 planes with the small ones being my favorites 💗. This Old Man from Washington NC do love me some Brothers and Alina ✈️🧔💝💝💝
This one looks so scale John. I love it.
That’s going to be fun to fly. Some nice detail. 👍🏻
Great to see you guys. Beautiful bird.
Very nice staggered wing plane, yellow is a great colour for all weathers too. Can't wait to see this on the runway soon 😉👌
We have now a lot of snow and its so cold. Will have to wait to warm a little.
Even have pilots!!!
OH YEAH 🇸🇮✌🏼🤩
MIKE BIRD 🇬🇧
@@PhilipCockram 🇨🇦✌🏼🤩
This little staggerwing looks very sexy and like good quality! 😃👌👍I think it`s maybe possible to bind the plane with an multiprotocoll transmitter. XK is mostely using Futaba FHSS protocoll for the rc planes and helicopters. That would be great with even the expo and all that stuff 😉 I´m looking forward to see this baby in the air! Big Salute to you! 🙂
I don't think it's a Futaba protocol, I tried binding it to my Radiomaster TX16V2 transmitter using all the protocols available and none of them worked. I took out the provided receiver and gyro and installed a micro Flysky receiver. It flies really well even without a gyro.....
Okay, thank you for the information 🙂👍@@scable-eq7bp
Would be great if I could fly this baby with my NX 10.
Yes, this would be great 🙂@@PetrincicBrosRC
Beautiful small and sexy bird greeting from Brazil
I jus ordered a red one for my son, yellow for me. Hello from NZ
If only they would get rid of the two bad things about this plane and sell it as a BNF so I could just use my own transmitter and gyro setup. Other reviewers have not been happy with the included gyro setup. I think these will bind to transmitter that can do FHSS protocol.
Looking forward to the flight video. Lights all over that plane! I've seen some reviews on this plane already and it seems to fly OK in 6G mode (like Safe) but not so much in 3D mode. Let us know how the assembly process goes. Easy or pain in the ass? 😅
Assembley went great. Pure joy. By now it looks awesome.
Unfortunately my flying days are over. 3-years ago I suffered a cerebral ischimic stroke.
I have a question regarding on how to assemble it with the servo connector, as you can see there are 3 holes there in the tail rudder and the aeleron, which hole should I choose to put the servo wire or steel to steer?
Three balsa planes in the bathroom?
👍
This aircraft is nice ... but ... sadly its electronics do not allow binding with other transmitters. It even has a S-bus port too but, unfortunately, it's non-functional.
They payed so much attention to detail… it‘s a sin, that they are not able to produce the plastic parts in the same yellow as the foam is. 😦
I have the red one,the the real one the wheels are retract i will hand toss no gear belly land ,the yellow is sexy also. 😊
😊💯🤟
...😜👌
Small , Sexy , and beautiful .
The plane ! Not you guys .