FREQUENCY ALIGNMENT (VERY IMPORTANT) EDUCATIONAL FOR ALL.

FREQUENCY ALIGNMENT (VERY IMPORTANT) EDUCATIONAL FOR ALL.
This video will demonstrate with detail on how aligning a radio and why FREQUENCY is so important.
Many shops will NOT show their work and leave you believing what they tell you when your radio leaves their shop. Many will say your radio is all set and spot on frequency, and all peaked and tweaked.
BIG PROBLEM, NO SUCH THING AS A PEAK AND TWEAK, RUN, RUN, RUN AWAY FROM SHOPS THAT SAY THIS TO YOU.
The proper terminology is ALIGN AND TUNE PROCEDURE, as I explain in many of my videos. The first part of ALL steps are alignments on the synthesizer circuit, then the receiver circuit, then transmit circuit.
FOLLOW PROCEDURE INSTRUCTIONS
This guy Ground Control 204 Michael Kline doesn't have any clue and all he does is peak and tweak radio's day in and day out flooding the airwaves with splatter boxes and taking money from people giving them only sloppy work in return.
Ground Control 204 claims I dont know anything about frequency and that his other little rant is his little $289.00 pocket puddle spectrum analyzer is the best and he claims to use for IMD yet still hasn't shown his work and a spectrum analyzer should be present at all times to make sure you have clean signal from the radio among many other reasons and applications there used for which he clearly doesn't understand. I'll stick with my $3500.00 unit as that is far more accurate than what you carry around in your little sporty box.
The point of this video is to show that he can say what he wants but the FACTS clearly show otherwise and ALL of his videos he does on ALL the radio's he has ever touched are ALL off frequency that he himself claims are spot on in which are NOT at all as you can clearly see in the video.
CENTER FREQUENCY 27.185000 +/- 20HZ
NO, WHERE DOES IT SAY 900HZ IS OK SO YEAH IT MAKES A DIFFERENCE 204. GO BACK TO TECH SCHOOL KID.
Instead of putting all of your time into making fancy opening videos, you should put that same effort into understanding radio's better and how they work internally and you just might become a good tech but the way you doing things and have been for a while only shows the lack of intelligence and lack of real interest in radio's and your just out to make money and not give the customers good support and a good functioning radio. A radio off frequency is like going to a garage, and the mechanic tells you you have a fouled plug, and it is mis-firing. Are you going to continue to drive on a bad spark plug and/or possible bad coil pack until it fails.
The point is if you know the radio is off frequency and out of tune then fix it so the radio can run right and can run clean the way it was designed to do but failure to fix the problem, chop shops like him only enhance it by peaking and tweaking radio's and they don't care about the synthesizer circuit and what's is going know there as that is the HEART BEAT of the radio to begin with. Without it functioning correctly and true, the radio won't perform the way it should plain and simple.
Thank you, and enjoy the video.
I hope this sheds some light on the topic and helps many understand why. frequency is so important.
PUT OUT AN OFF FREQUENCY AND DIRTY TUNED RADIO, EXPECT TO GET BAD RESULTS ON THE AIR.

[@robcole332]

Well explained brother. Thanks

[@dxradioshop]

Thank You

[@phillipthomas4418]

You r so write DX raido shop .I talk on ssb about my life you can tell real fast when your on ssb . You know no you what you doing . Sir .you tell it like it is .thank you . From Mr Phillip Thomas MPI 357 Harlan KY .

[@CamilleCullen-ow6qj]

Stu is a straight shooter. He knows what he is talking about. Robert K5TPC

[@dxradioshop]

Thank you sir. I always try to do my very best to ensure good quality work and good customer service