What number should i set on my modulator in order to get clear visuals and audio on two different tv's? Because when it is set on 21, only 1 tv is clear and the other one not so clear
if we already have a splitter for an antenna on the roof and we connect this modulator in one room, will the other room see both: antenna signal on the roof and RF modulator? Thanks!
sir you connected both the HDMI from the DSTV and the coaxial cable from the Modulator to the same TV, how is the other tv going to see the signal or channel. please break the steps down thoroughly for first timers
By using the RF modulator one can spread the decoder signal to separate tvs in different rooms, My question is that can one change the channels in the room without gotv/DStv box?
Sir thanks for sharing, this is what I did, the picture is perfect but no sound on the other TV, what should I do, the volume could not connect to the dstv sound
What is the right number supposed display on the modulator, my own is not working i don't know if is from a change of the figure display on the modulator
Can I connect 3 decoders to one modulator. If yes please make a video of it so that we watch. Like 3 DStv decoders to one modulator in order to get multiple channels
My Televes 5859 modulator has not been working, displaying E3. Can't watch DSTV in the other room anymore. It goes back to that whenever I press the button on it. Please help. Thanks.
Thanks for the info, but i ve issue. We have 2 different decoder (dstv and starting) after the connect the tv inside the room isn't picking the dstv clearly, its showing black screen with zzzzzzigzar sound. When i use it on the startimes, it was working clearly.... What should i do
Check your connection properly. If connection is okay, it will pick. Or even take the TV to the parlour and test with a short cable. If it still doesn't pick, check if the UHF frequency of both decoders are the same and change one
@@satellitebos3993 thanks, its the frequency of the modulator i needed to change. I ve done that but its really hard cos the up and down botton hardly respond when i click it why?
Just follow the steps highlighted on this video for both then connect the output on both modulators to the different inputs on an alcad booster. Make sure the UHF/ vhf frequency on both decoders are different: hope to do a video on this soon
How to connect 2 tvs 📺 from one DStv decoder (model 4s) without using a Rf MODULATOR ua-cam.com/video/Ofiq7a_tzsg/v-deo.html. .... use this if the decoder has Rf out
Ok sir..... But assuming we scan d first tv with d default settings,if we gotta scan more TV's, we gonna change d frequency for each to avoid interference ryt?
Thanks for sharing this video. I just bought a new decoder and found your video very helpful. The only issue is that the 2nd TV stops working when we put the primary TV off. Is this normal, what's the remedy??
It's not supposed to be so: the second tv is controlled by the decoder and not the 1st Tv. It should only go off when the decoder or modulator goes off
@@satellitebos3993 My thoughts exactly! I've gone through the installation process again and nothing's changed. I don't want to call a technician because I've done the hard work already 🙂
@@satellitebos3993 Hello Satellite Bo's. I found your video very helpful. God bless you. Please I have a challenge with my modulator. The 2nd tv will scramble after like 5min. I have to re-scan again and it will scramble and go off. Pls kindle help me. Thank you
I frequently see mostly in Hotels a connection like this is made and you can still change channels of your choice in your room. How is that connection being done??
It is more advanced in hotels cos you will need a combiner,multiple decorders,multiple modulators, splitter and an amplifier (booster).it is easy to install but can be complex and tricky if you don't fully understand it.
Olá parceiro, se eu quiser distribuir o sinal da DST decoder para outros cómodos de minha casa, ele permite que os outros compartimentos possam ver todos os canais disponiveis no meu decoder?
Thanks for sharing, I just connected mine working perfectly
Thanks for the feedback; glad this video was helpful❤❤❤
@@satellitebos3993 please what will I need to start this process. The cables and that device. What’s their names
Your explanation makes it so easy
What number should i set on my modulator in order to get clear visuals and audio on two different tv's? Because when it is set on 21, only 1 tv is clear and the other one not so clear
Thanks for sharing.....Please can you help me on how to connect to more than three TV set while using an Explora & Zappa extra view...
Are you connecting from both decoders or one?
Please I need a video of how to combine two RF Televez signal modulators together in order to have two signals being extended to a television
Pls can i use dis type of moduletor on fta decoder n how can i use it for up to three tvs
Hello man please which of these did you used, channel o1, o2 or AU.
And which frequency number did you also use
Av
if we already have a splitter for an antenna on the roof and we connect this modulator in one room, will the other room see both: antenna signal on the roof and RF modulator? Thanks!
If you are getting signal on decoder, definitely you are connecting this modulator from decoder to TV 📺, so you will get it
sir you connected both the HDMI from the DSTV and the coaxial cable from the Modulator to the same TV, how is the other tv going to see the signal or channel. please break the steps down thoroughly for first timers
By using the RF modulator one can spread the decoder signal to separate tvs in different rooms, My question is that can one change the channels in the room without gotv/DStv box?
No
No
Sir thanks for sharing, this is what I did, the picture is perfect but no sound on the other TV, what should I do, the volume could not connect to the dstv sound
Check the sound setting on the channel scan change from bg to others till the sound comes up.
Can you still split from this modulator with the help of a splitter device to share more signals to other room without a booster?
From the output wire, yes
Can you please change the channels there to on only on the main decoder
Please rephrase question ,didn't get 😪
Please sir, how to connect the two televes modulator on extra view installations to enable it to be changing in deferent room's
What model of decoder did you use?
Thanks so much. Your explanation is easy. But i connected 2 televisions. And scan yet it shows no signal. What could be the fault
Take the tv to the sitting and scan with a short cable
Can I change to my favorite channel in my room apart from the main source
No
What is the right number supposed display on the modulator, my own is not working i don't know if is from a change of the figure display on the modulator
good Job .Please how can i share 2 hd extraview connected on other 8 tv's .and it will be showing 2 decoders on all other TV's
I have this connection the picture is very clear just as I want it but the audio is very bad. I dont know what to do
Please Can i use this modulator for a canal box decoder ?
Please will all the channels on the decoder show on the tv
One at a time
Hello. Is it possible to add a TVLink Eye to the second TV to change channels from the second TV with this setup?
Can I connect 3 decoders to one modulator. If yes please make a video of it so that we watch. Like 3 DStv decoders to one modulator in order to get multiple channels
You can but wouldn't advice to do that for a customer because it will the picture quality.
How can i spread or connect to about four or five rooms, the modulator has how many ways
Use splitter
Good job thanks Boss 👍
Thanks this means alot to us
After splitting can I use remote on the shared tv ??
Please what settings can I use for a tv that's in a long distance. Thanks
Thesame way with others. You can also direct AV or HDMI
For a long distance t.v i suggest u tune it to a higher number
Hi please I mistakenly did a factory reset on the LG TV that isn't directly connected to dstv but I could watch dstv from there. Help me please
That was rf connection: just run an auto or manual scan on the tv
My Televes 5859 modulator has not been working, displaying E3. Can't watch DSTV in the other room anymore.
It goes back to that whenever I press the button on it.
Please help. Thanks.
I connected mine, but it's asking for insertion of CI card.
Can I get help?
Good morning,please I want to know how to make the picture clear when using modulator RF Out to two television
Ple can i use one mudilater to conrt 20 tv in a hotel
The red digit showing on the modulator does it regulate itself or you have to set it to specific digits?
It doesn't regulate itself. You mainly shouldn't do much with it except tuned it out in the first place
Mine was only showing picture but no audio. The picture is ok but no audio output. Can audio be adjusted on the modulator?
Pls what is the useful of the send input on modelator
That's where you connect your decoder to the modulator
How to set the modulator settings, I mean the channel settings on the modulator it self
Thanks for the info, but i ve issue. We have 2 different decoder (dstv and starting) after the connect the tv inside the room isn't picking the dstv clearly, its showing black screen with zzzzzzigzar sound. When i use it on the startimes, it was working clearly.... What should i do
Check your connection properly. If connection is okay, it will pick. Or even take the TV to the parlour and test with a short cable. If it still doesn't pick, check if the UHF frequency of both decoders are the same and change one
@@satellitebos3993 thanks, its the frequency of the modulator i needed to change. I ve done that but its really hard cos the up and down botton hardly respond when i click it why?
At least you got it😂😂😂
At least you got it😂😂😂
Where do i connect the Lmb code on the modulator?
Connect Lnb cable to the Lnb in on the back of the decoder not modulator
Hallo if I have like 7tv on the same RF can each one watch preferred channels
Can a modulator connected to astel splitter. Plz need help
Pls how do I set my tv to be clear
Does it have rf?
Pls how can I connect two dstv Zappa with two moduletor to be showing 2 station in one tv
Just follow the steps highlighted on this video for both then connect the output on both modulators to the different inputs on an alcad booster. Make sure the UHF/ vhf frequency on both decoders are different: hope to do a video on this soon
How about fta decoder example quality advanced s2
How to connect 2 tvs 📺 from one DStv decoder (model 4s) without using a Rf MODULATOR ua-cam.com/video/Ofiq7a_tzsg/v-deo.html. .... use this if the decoder has Rf out
does it work using a TV link?
Please how do I auto store on my televes modulator
Just scan your 📺
Can I watch different channel at same time or we have to watch one channel only
One at a time
Please what will I need before I start. The cables and others. Please I want their names so that I go and buy. Thanks
Televes modulator, coaxial cable, frequency nuts, antenna plug, av wire, 2 or more TVs, a decoder
@@satellitebos3993 thanks
💕
@@satellitebos3993 I can’t get the modulator to buy here in Kumasi, Ghana
@Fabio TV ask for DSTV modulator
I see that the it as a digital number, so what does number mean?
Frequency, symbol rate , modulation etc
When you mistakenly change the number on the modulator, what are you going to do?
Can u share more than one channels to other tv ?
No unless you're using more decoders
how to set the televes modulator to DEFAULT setting.
Is it a new one?
What number can I set it on to make it to snow well without shacking
Just leave on the default settings that came with it and scan
Ok sir.....
But assuming we scan d first tv with d default settings,if we gotta scan more TV's, we gonna change d frequency for each to avoid interference ryt?
No
Thanks ,it really helps
That thing where de av cable acomected is called what?
Sir after connection my it was show white and black it was not showing pure image and from Nigeria
Now get a short coaxial cable, take the 2nd tv closer to rf modulator connect and rescan
So where will I put the coaxil cable that is coming from the dish?
On the dstv decoder Lnb in
I did it as instructed, but no sound 🔊 is coming out.
How can I use two rf modulator from two hd decoders pls
You can use 1 for the two Decoders
Pls tell me how I can do it
Use a T-junction to attach both decoders to the modulator
How to connect modulator and armpledfa
I did as instructed, the video is clear but the sound is not clear
Edit the sound type: if its on Jk, change to BG, keep changing till its clear
This is informative
Thanks
Thanks for sharing this video. I just bought a new decoder and found your video very helpful. The only issue is that the 2nd TV stops working when we put the primary TV off. Is this normal, what's the remedy??
It's not supposed to be so: the second tv is controlled by the decoder and not the 1st Tv. It should only go off when the decoder or modulator goes off
@@satellitebos3993 My thoughts exactly! I've gone through the installation process again and nothing's changed. I don't want to call a technician because I've done the hard work already 🙂
What I should have said is that the dstv stops working on the 2nd TV when the primary is off even though the modulator and decoder are still on
@shine girl I like your spirit 08131524704 WhatsApp me so I can guide
@@satellitebos3993 Hello Satellite Bo's. I found your video very helpful. God bless you. Please I have a challenge with my modulator. The 2nd tv will scramble after like 5min. I have to re-scan again and it will scramble and go off. Pls kindle help me. Thank you
My room TV is not showing clear anymore it was share to the room using this modulator
Check to see if the modulator settings was tempered with
How we connect three decoder without rf to show three different things?
how to use 2 modulator and DStv decoder with startime to view on TV
I frequently see mostly in Hotels a connection like this is made and you can still change channels of your choice in your room.
How is that connection being done??
Modulator + booster
It is more advanced in hotels cos you will need a combiner,multiple decorders,multiple modulators, splitter and an amplifier (booster).it is easy to install but can be complex and tricky if you don't fully understand it.
Thanks for this. It was educative
How do I connect in different places
Connect av or HDMI from decoder to one tv 📺, then Connect with modulator as seen this video and split to different tvs 📺
You don't have to do any thimg to the rf modulator like changing the number infront of the rf modulator
How can I use it for 5 rooms sir
Attach a splitter
Okay
Please are you in Lagos
Currently in Enugu; I can put you through if you want
Pls I tried it ,but it was clear enough .what should I do ?
Try adjusting the terminal of your coaxial cable on the modulator
What is the channel range becouse it scam but dont get channel
Olá parceiro, se eu quiser distribuir o sinal da DST decoder para outros cómodos de minha casa, ele permite que os outros compartimentos possam ver todos os canais disponiveis no meu decoder?
Thanks for the information
What can you do if the virtuality is not sharp?
Tune the frequency to another number advisably from 50
Thanks bro, please keep sharing
Sa mâche pas avec mon décodeur canal
Please my own is not that clear after the connections why??
Try adjusting the terminal of your connections
Please which is terminal
The end of your coaxial cable
Thanks for the information 👍
Very insightful
Nice job here
Is audio stereo?
Yes
@@satellitebos3993 amazing, it's rare for a modulator to have stereo sound, are you sure about that?
Ok
I love this video
This is so educative
I have mine connected exactly like this and the other TV won't show
Thanks for sharing👍
Connected mine but no sound
@samsameey how did you run your connections
@@satellitebos3993 I attached the cable according but instead of it to bring out normal sound , it didn't..
Great job👍
Hello morning, please am having 4decoders that I want to be watching it on one TV what do I do
Get an alcad modulator
This was helpful, thanks
Thanks for sharing❤
Nice work. Please keep it up
Thanks for this
Thanks man👍
Thanks a lot
This is great
How can I do it for 3 televisions
Use splitter to connect from the already connected one
To get to two or three TV
Helpful
Glad it helped
I love this
Just what I needed
but it scrambles sometimes
Bro this one can't scramble 😂 , this one is on how to connect from one decoder to two or more Tvs
Not working sir