Had this one until I got a new pc in 2018, the 5450, well... wasn't the best.The PC I upgraded to had a 1050ti and that was a goddamn huge leap, and few months ago I upgraded it to a 1660s and that was another big upgrade, currently rocking ghost of tsushima high settings smoothly :)
Did you try going into Properties and enabling the setting "Extend official overclocking limits"? You will then need to reboot your machine before it will allow the higher level overclocks that are common with this card.
Set memory to 900 Core to 885 Asus one have fan so max it out And then install directx9 I got 40 on gta 5 (lowest setting) 60 on farcry 2 (med) 80/120 on csgo Thats sooo playble
I almost lost my VGA because I followed the core clock and memory clock recommendations from this video For 2 hours I tried to make my VGA return to normal, which had an error because of following the tutorial in this video
Use MSI only to unlock the overclocking feature then you can uninstall it. Using overdrive from the Catalyst software, i set my 512mb card to 760 GPU and Memory on 695 mhz.
I have reached 750 mhz clock and 580 mhz memory, I don't think I can reach your temps as my gpu is reaching 73 degrees now on amds test. Mine doesn't have any fan. However I am running chilled ac in the room at 20'
That could be caused by a variety of things. Just off the top of my head some causes could be: -The cable going from the gpu to the monitor is going bad. This can happen with both VGA and DVI connections. -The socket on the gpu is going bad. -The drivers got corrupted. Try reinstalling drivers for the card. -The gpu's color settings may be set incorrectly in Windows. -If the screen starts off normal, then goes yellow after using it for some time, that may be an overheating issue. -The monitor may have it's color profile set wrong. Use the monitor buttons to check things like color/contrast/gamma. Good luck!
That's strange. The HD 5450 does support DX11 and shader model 5.0 as far as I know. Is the game perhaps trying to use integrated graphics in the machine, or is the monitor hooked up to integrated graphics port? Have you tried updating the drivers to the newest supported ones? What game are you trying to run?
If you enjoyed this video, please LIKE and SUBSCRIBE to show your support! Thank you for watching!
I had this card 12 yrs ago. It worked good that time. Was playn league of legends and metin2 on it. Never disapointed me
Oh boy lucky you i played gta 5 on my hd 6450 512mb ddr3 had 24-33 fps on 800x600 it was a part of my life until 2019 and i hate remembering it
25%+ is crazy good OC
I have this amd 5450 card.
Should I add it as my gpu in 2024?
My specs: I3 3rd gen, 4gb ddr3, 1tb hdd, zeb h61 board, win 7 ultimate.
I use the hd5450 1gb from the very old pc, it works on honkai star rail really well without overclock. 4fps on 1080p lowest lol
Had this one until I got a new pc in 2018, the 5450, well... wasn't the best.The PC I upgraded to had a 1050ti and that was a goddamn huge leap, and few months ago I upgraded it to a 1660s and that was another big upgrade, currently rocking ghost of tsushima high settings smoothly :)
i used this card in dual core processer and 512mb graphics card
The power requirements for this card are extremely low, at only 19 watts.
I always wondered what's the difference between GDDR3 and DDR3 variant
Apparently its supposed to be a 45% boost but because its got a 64bit lane it doesnt get much benefit
So which one is the giving best performance
I need help
When i install the drivers the max memory clock was 700 then when i download msi ab it change to max memory clock 520
Did you try going into Properties and enabling the setting "Extend official overclocking limits"? You will then need to reboot your machine before it will allow the higher level overclocks that are common with this card.
@@XLSTech
Yes i did it and the max memory clock 520
Same issue
i have an Asus one what are the best overclock settings for this to not melt and have better performance ?
Set memory to 900
Core to 885
Asus one have fan so max it out
And then install directx9
I got 40 on gta 5 (lowest setting)
60 on farcry 2 (med)
80/120 on csgo
Thats sooo playble
780 gpu clock, 720 memory should be good
If i even put the lowest over clocking values my card begins to glitch😂😂
I almost lost my VGA because I followed the core clock and memory clock recommendations from this video
For 2 hours I tried to make my VGA return to normal, which had an error because of following the tutorial in this video
good video you could make a similar video with a hd 7470
everybtime i overclock it crashes my pc why is that
Good video
Bro what should I put in a 500mb AMD HD 5450
780 gpu clock, 720memory clock is max for me, should work for u
@@iEx0dushi I did these settings but It glitches out the screen idk if I have a 500mb too lol
Use MSI only to unlock the overclocking feature then you can uninstall it. Using overdrive from the Catalyst software, i set my 512mb card to 760 GPU and Memory on 695 mhz.
Wow thanks, no fan required?
I have reached 750 mhz clock and 580 mhz memory, I don't think I can reach your temps as my gpu is reaching 73 degrees now on amds test. Mine doesn't have any fan. However I am running chilled ac in the room at 20'
Hii can you help I have this graphic card but whenever I put thi on my mother board my display get yellow any a
Solution?
That could be caused by a variety of things. Just off the top of my head some causes could be:
-The cable going from the gpu to the monitor is going bad. This can happen with both VGA and DVI connections.
-The socket on the gpu is going bad.
-The drivers got corrupted. Try reinstalling drivers for the card.
-The gpu's color settings may be set incorrectly in Windows.
-If the screen starts off normal, then goes yellow after using it for some time, that may be an overheating issue.
-The monitor may have it's color profile set wrong. Use the monitor buttons to check things like color/contrast/gamma.
Good luck!
it says i need shader model 5.0 and DX11
when i try to launch a game
pls help
That's strange. The HD 5450 does support DX11 and shader model 5.0 as far as I know.
Is the game perhaps trying to use integrated graphics in the machine, or is the monitor hooked up to integrated graphics port?
Have you tried updating the drivers to the newest supported ones?
What game are you trying to run?
@@XLSTech hi I can't exceed over 585 for the mem clock what settings do u think I can do?
This is my current card and my experience with this card is bad
It doesn’t play Shadow of the Tomb Raider, even at the lowest settings. Glad I got an XSS and a PS5, shit!😂
This GPU was never meant for gaming seeing it's the price of a dualsense controller
@@Lazar-ox5bd thanks a bunch
for 40€ i buy a gt1030 2go, it's more power of hd5450 ... for less money
İgloo
I spent $5 on an hd 6350 it's just a rebranded 5450.