Artillian 3rd Function Diverter Kit Installation John Deere 1025R Grapple
Вставка
- Опубліковано 7 вер 2024
- Step by step installation instructions for the Artillian Diverter Kit on our John Deere 1025R Sub-compact Utility tractor.
Two major steps:
- Hydraulic Diverter Install
- Electric Switch Controller Install
This diverter kit can be used with all 3rd party grapples for the Deere 1-series, including Everything Attachments Wicked Root Grapple, CT Attachments Grapple, and others.
Get your diverter kit here: artillian.com/H...
wire connector: NAPA Part # NW 725452
The wire strippers are available through my amazon store:
www.amazon.com...
More details about available grapples for Deere Quick Attach Loaders: www.tractortime...
An oldie but a goodie. I’m doing this upgrade on my 2038r this week
I have been watching your videos for quite sometime now. As a matter of fact, you helped me decide between a cheaper "NORTRAC" and between red, orange, blue and green, Anticipating a larger usage and need for heavier bucket work, I bought a new 3025 last summer. I felt I needed maximum ground clearance and still a smaller unit. Now I watch your stuff and like how easy you make attachments seem. The diverter is going on mine next I think. Anyway, keep them coming.
Great video as always Tim. I'm real picky about finish on anything I mod. Obviously the way it's sold from artillian is the correct way to sell it in general but for neurotic people an easy way to clean up the momentary switch is replacing the knob with one that has a built in switch (like an automotive one for a line lock or nitrous) and a length of shrink tube to cover the rod and wire from knob to boot.
Wiring directly from the fuse box is the only way to fly. Great choice taking the extra time to get the right connectors. Gave me chills of joy to see you cut off that inline fuse holder.
I bought a Tractor Time with Tim starter kit! John Deere X585 with loader, rear PTO and 3 point hitch!
Congratulations! Well equipped!
I mounted mine to the engine mount so it stays on the tractor so I have it for my snowblower too I just put quick connections on the valve to switch between the loader for my grapple and I got the hoses on my snowblower as well works great. And Tim good videos keep it up
I took my loader off when I put mine on. Made it easier access thru the entire install. Tok roughly 45 minutes and works great.
Yea, that would have helped.
unscrew the bolt the hold the hose clamp
Yikes! Makes me glad we had the dealer do our third function valve. Merry Christmas guys!
I kinda enjoyed it. Perhaps I'm weird. The only hard part was because of the approach I chose for wiring.
The instructions left the wiring 'to my discretion'. ...so I thought it would be helpful to show how I actually tackled the problem.
Oh I wish this video was out a few days earlier. My 1025R stopped running and it turned out to be the fuse block got wet. This would have saved me a bunch of $$$ had I known how easy it was to get at. Thanks for your videos. I've learned a lot about my Johnny from watching. I cant wait until spring! I just bought the 2.5 acres in front of my property and have a few thousand yards of dirt to move around.
Sorry about that Joe! Everything is easy to access on this tractor! Use jdparts.com, have confidence, and dig in!
joe Chavez as a fellow 1 series owner I urge you to buy the shop manual for the 1 family on cd. I got mine on eBay and it was worth it. Can seem a bit pricey until you do services on your own and make up for it. Also allows you to search online for part numbers directly if you have a cheaper source than your local dealer. Everything the shop has I have on hand for parts schematics and part numbers. Cheers!
s1283 I'm a disabled vet and sometimes I can't work on certain things. Learning more and more about the machine allows me to better diagnose problems
joe Chavez I can completely understand your situation. Another reason I love watching this channel too. I learn many ways! Mostly through discovery, but seeing TTWT get it done their ways, I can see perspectives I may not get on my own. Nice to meet a fellow vet. 4 more years and maybe I can reach 20.
Just ordered everything I need for a Grapple-Rake-Grapple for my 3032e from Artillian. I have a lot of forest floor clean up to do here in Oregon. Going to watch your video a few more times so I'm ready to install.
WooHoo! Congratulations!
How do you like the 3032e
Merry Christmas to you and your family!
Starting my install rightnow :)
Picked up a grading job this morning just came home time to install grapple can’t wait
Excellent!
Looks identical to the Summit Kit
Look at the date. I think you said it backwards. The summit kit looks exactly like this one :-)
@@TractorTimewithTim Copy cats lol
Thanks for the how to video. You do an excellent job explaining and providing step by step instructions.
Thanks Dan! I was afraid it was boring.
Not boring, informative :)
Thats great they sent you that. Can not wait to see it in action. Merry Christmas to you and your family!
Did you use working words when you where trying to find the lost nut?
Nah. No point.
I'm a fan of magnet bowls for putting my parts in, saved me a lot of time when taking things apart and putting them back together. Another item I have is a limited space magnetic pickup tool. The magnet is protected so you don't fight it sticking to everything but the part or tool you want to grab.
More good advice!
What if you drop your credit card in it?
Good looking riding mower you got there.
Welcome to our channel, Leonard. Obviously you haven't seen many of our videos yet. This is a tiny 'riding mower' for sure.
However, with the appropriate handing, it can do some pretty amazing things. Have you seen the video with the grapple in action? ua-cam.com/video/ZHGRxenfK9c/v-deo.html This one is a good one to show just how effective this little guy can be.
I own a JD 5075E with cab and front end loader etc.... It is also a little machine but I make do.
There are times the 1025r is the largest rig we could fit into the job site. Of course, other times, it really doesn’t have enough umph to do the job. Overall, it packs a lot of punch for its small size. We’re thrilled with it
1025r is a mean machine, and also compact enough to do a nice job finish mowing.
Hello Tim. Love your channel. Would you please do a video on how to install a hydraulic deck lift kit on the 1035R tractor?
I wonder if I can operate a hydraulic hammer (or a shear) with my “Big Diane” (a 1025r) because I think that I may demolish my grain bin with it
That would be a challenge!!
Merry christmas
From our family to your family- Merry Christmas!
Merry Christmas to you!
That was a job to install. The actual grapple sure is fast. Looking forward to the grapple video and the floor board removal video. Thank you for the videos. Merry Christmas to you all and God bless.
It took some time for the electrical. ...would have been quick had I chosen the 12v plug version, but I'm glad I chose the more permanent solution.
Merry Christmas to you and your family!
👍
Great job! I'm definitely interested in this setup for mine. Thank you for sharing and have a Merry Christmas
A very informative and very good video. I’m looking forward to your upcoming video showing you using it for the first time. Merry Christmas!
You did a great job on installation!
Thanks!
Thanks for the install video Tim, I'll be doing that on mine this summer.
Looks great Tim.Now If Artillian would come out with a front fender kit for the 1025r that would be great.
Front fenders would be nice.
Well done. Merry Christmas from my family to yours
Very nice! I don't have an excuse for a grapple yet, but a manual thumb for my backhoe bucket might be nice to add sometime. I need to find the right contacts for adding fuses in my orange tractor's fuse block. I want to add some working lights, and I want to do it the right way. I'd have to use the correct crimper, of course. Some say that I have issues.
Mark's Tech Channel I like putting new wires in wire loom. It's easy the cut into wires routing them all over edges and between parts that could pinch the wires. Use dielectric grease to provide anti-corrosion and help keep moisture out.
Good advice. Thx
Fantastic new tool!
Yep! Thanks for watching!
I have a John Deere 3032e I also have a power beyond I would like to use the hydraulics off the power beyond for a third or fourth function remote how do I do that
Check out our recent videos showing our new summit hydraulics rear scv kit. It will work beautifully for you, and will hook right up to your power beyond!
Don’t forget code ttwt for 5% discount.
Nice. I have the WR Long 3rd function kit on my tractor and I like it pretty good. It came with a whole new knob with the 3rd function switch on the knob. I like the diverter too. The only thing I don't care for on the WR Long kit is the hoses are so small that you can't get much flow. It's fine for grapples and tree pullers but I wish it had enough flow for some other non high flow useage like a Harley Rake or a snow blower.
The link to this doesn't work?
Artillian.com
From Me and My to You and Yours
Have a Merry Christmas
From the Mountains of NorthEast Tennessee
Merry Christmas, Pete!
Id love to have a tractor like that
Useful and fun. Check out the rest of our videos.
Yeah I have been watching others. Id love to buy one but the payment holds me back.
Another great video. Really miss my 2305. Bought a Mahindra 1526. Nothing wrong with the Mahindra, just miss all the things the little Deere did that the bigger Mahindra does too. Been back looking at the JD. We'll see. Going to subscribe, thanks TTWT.
Welcome to our channel, John. There is something to be said for a SMALL tractor.
I need the terminal end for the fuse block. Where did you get it? What is the part number?
Mentioned in the video, right?
Good video tim and hope too see it working soon 👍
Great video Tim! Your collecting quite the hand tools! Merry Christmas to you and your family. My family and I are heading down your way this holiday, hopefully we will have good roads, no snow!
Nothing but a dusting yet!
Hello,
Nice explanation.👍
10cm bolt for the fuse box? That's nearly 4 inches.😂
Cheers from Belgium.
Love your vids please do more maybe every day. Ps love your 1025r I’m considering purchasing one
How about if you do YOUR part? Watch every single video, and don't skip the ads.
It is not easy to put these videos together.
Merry Christmas to you Tim, your family and of course Johnny from Southwest Michigan. Lol. Thank You again for all of your step by step videos. They have been so helpful. No one does step by step like you and your family does. If you ever get an enclosed cab? Could you please do a step x step video on that as well? That’d be great and helpful. I’m talking one of the real solid cabs, not the plastic ones. Thanks again for another year of helpful videos. Also. Happy New Year to you and yours. 😃
Great video Tim and a very nice installation. It should work for a long time. Merry Christmas to the family.
Thanks Ken!
enjoyed the video ,and you both need a remote mike,for better audio
Merry Christmas Tim to you and your beautiful girls!! Santa came a day or two early here in PA and brought me a new(to me) New Holland TC18 compact tractor!! Im waiting on it to be delivered today!! Im so excited
Congratulations, Eli! ...but after ALL of these Johnny videos, you go blue!!!
lol i know....It was just such a good price though and i couldn't pass it on. I have my own Little Blue now!! i love green but New Holland/Ford holds a dear place in my hart
You'll love it. Philip's little blue is a really nice little tractor!
yes it is..mine is not an ls like his but i like all tractors!!
Tim a very good step by step installation video. This should be helpful to anyone installing one of to a 1025r or other tractor for that matter. I would love to get to ask Katriel sometime about looking for the fuse block nut. LOL Can't wait to see the fist video with you putting johnny and his new grapple hook to use. God Bless and Merry Christmas to all of you. I pray that 2018 is even a better and more prosperous year for you and your family!!!!
Another enjoyable video Tim/ Katriel.
When I did mine a couple of years ago I too found the on/off switch wire to be just barely long enough, another couple of inches would have been great.
The nut on the back of the fuse panel is actually 10 millimetres not centimetres. Lol.
I didn’t notice you mentioning anything about reinstalling the rubber boot over the loader joystick scv.
I had a heck of a time getting the inside part of the boot secured around the scv itself and ended up having to remove the fender to get it properly situated. Just wasn’t enough room to get my hand in there any other way. Have a great Christmas folks and keep the videos coming.
Duh. Why did I say centimeters!?!?!
good job
That went very well. Great video looking forward to seeing it work.
Thanks John!
surplus center has a solenoid diverter valve for $59 hoses 12=26$ fittings and adapters $3 ea foot switch $17
Interesting. Of course you can build your own. L
Good job Tim. Can't wait to see it in action!
Thanks Eric!
Does the new 2021 1025r TLB come with 3rd function or is that a option that needs to be added when ordering the Tractor?
Option.
So the dealership adds it that's weird you think the factory would
Thanks for the speedy reply Tim.
Tim my wife thinks you are a very bad man. I have only watched half your videos an already ordered a 2025R loader,260B backhoe,60” mower. Should be ready Feb 19th. Little late for Valentines Day guess a picture will have to do! :-) love you videos
Uhoh. I do not like to be on the bad side of the wife! What can I do to appease?
Oh, and 'congratulations'...
Hey Tim. Thought I'd chime in here.
I FINALLY got my 1025r about a week ago. It's brand new and I had my JD dealer install the factory 3rd function kit for me pre purchase.
I was wondering if it might be possible to do a video on just the hydraulic hoses and twin grapple diverter for those of us that kind of have a mechanical mind but plan ahead for these things. I would like to see how you routed your primary hoses to your 3rd function ports on the side of the engine block especially. Thanks for all your help and I especially like the bible verses at the end of every video.
Deere supplies a kit to route the 3rd function to the front of loader.
I just bought hoses to route to the Artillian splitter block (it isn’t a diverter...just a splitter block)
Merry Christmas Tim and family from the mountains of southwestern Virginia !!!! God bless you with His Love today as we take this time to celebrate the birth of our Lord and Savior Jesus Christ !!!!! Eddy
Thanks Eddy! Merry Christmas to you and your family!
Tim can you buy the Artillian kit with the two port splitter?
Yes.
@@TractorTimewithTim i think I ask that wrong. I already bought the kit and realized I need or want the two port splitter. Could I have gotten it without the single port splitter?
And by the way I need to quit watching you! I keep buying stuff you show! My Harley didn't cost me this much!!! Lol
Just found your videos and they are great ! I have same set up but I made my own grapple and used a John Deere 3rd control valve mtd. On my rops I can use bucket functions and grapple simultaneously can you tell me what grapple you have and I assume that is a complete kit ? I want to install that set up on my pops tractor thanks for sharing merry Christmas 🎄🎁
Welcome to our channel! Glad to have you on-board!
We have the grapple from www.artillian.com. It is an modular approach, so you can choose which pieces you want.
Need help. Order a 1025r with 3rd fuction. It came in today but dealer is saying they have to add the kit because 3rd fuction is not added at the factory but a kit is added at the shop. Is this true I've researched alot and feel like there pulling a fast one
Nope. 3rd function is always dealer install.
@@TractorTimewithTim thanks for fast reply I was about to have a little fit. So I'm good with dealer adding it
Hi Tim! I'm revisiting this page after following your exploits with your new grapple to see how well it worked for you, I'm sold! The links you provided giving a very detailed assessment of the various brands available along with their pros and cons were fair and helpful. I'm running a JD 2025R with the H130 loader and feel confident that I can do this job after watching you. I do have a mechanical background. Thank you for you all you do for us compact tractor owners by sharing your experiences with us, you are a great resource. I recently bought the same large socket sets that you recommended and love them for the affordability and usefulness. And I also used my TTWT discount on a set of Edge Tamers. Blessings to you and your family Tim!
Thanks very much for the kind comment.
I’m certain you can handle the install. It wasn’t difficult, it just took a little time.
The grapple adds another dimension to the tractor’s function. I’m certain you will enjoy it.
Great video Tim. So the only question is if I get one are you gonna help me install it?? 👍
I'd recommend getting a new joystick knob with the button built in 👌🏻
I've been looking everywhere on the internet for one and those I did find cost a fortune. Any ideas where to find one reasonably priced?
I agree - I just need the part number for my JD 3032 tractor
That is a nice implement to have around the farm and I wish that I could afford to buy one for my tractors.
Maybe someday, Sidney!
Salut Tim
Si j’ai des questions en français , aller vous être capable de me répondre en français , je suis du Québec . Canada , et je te trouve , toi et ta femme super pro et cool, et professionnel .
Félicitation pour tes vidéo, super merci. Vous êtes les meilleur du net , c’est ce que toutes mes amis disent au Québec .
Merci !!!!!!!!!
The Claw chooses who will go and who will stay.
Merry Christmas Tim I enjoyed the video and it was very informative I have been kicking around a few options for putting a third hydraulic on my MF1739 front loader this seems like a good way of accomplishing that I would like to get a grapple bucket to handle logs and brush in the near future.
Thanks again keep up the good work.
Jeffrey M
Does your Massey have a quick attach bucket?
Tractor Time with Tim
Yes it does, I purchased a set of pallet forks from Tomahawk skid steer attachments or in Nappanee, IN. They work good but not a lot of control so I think a grapple would be a bit safer as well.
Dunno about safer. The grapple is mean! However, it is an amazing attachment!!!
Tractor Time with Tim
Hope you had a good Christmas, we sure had a nice one with all the family and good foods. I really enjoy working with my tractor between my dad and I we both heat with wood and we move a lot of logs around, unfortunately I had a log about 8” dia 10-12ft long come over the forks didn’t hit me while running the machine but it did dent the hood of the MF1739. That’s where the grapple would give a bit more control in moving logs and brush. To everyone running equipment be safe out there.
Thanks again,
Jeffrey Misch
Yea, hard to keep stuff off the hoods of these small tractors. It seems to 'hop' right over RJ bucket or fork frame.
This seems to be an advantage of the plastic hood (believe it or not). I have hit it pretty hard...no dents.
I want one really bad but I'm having a hard time justifying the price on these (from any of the manufacturers). For example the pallet fork backing plate alone is $659 from Artillian and it is nearly identical to my Titan pallet fork plate. The Titan was only $400 for the plate WITH the forks. Ouch. Great video though! Learned a lot about the diverter install.
...but you lost a significant amount of lift capacity with the Titan.
Also is made of China
Yes they are so heavy especially for a small tractor
Wasn't there an Artillian battle cruiser threatening to invade Earth in the movie Men In Black.
Don't run your fingers around hydraulic lines looking for leaks unless you're sure there is no pressure in the system. It can kill you
There is no pressure in power beyond as long as no valves are being operated. Further. We had already visually inspected for oil.
That tractor is so dinky! I didn't know they made green Tonkas!
Pretty cool, eh? Welcome to our channel!
Where did you get the 4 port thingy on the from of the loader so I can use an implement with 2 hydraulic cylinders and 4 hoses (like your grapple)? Thanks for the video it was wonderful.
artillian.com it is a splitter ....the clamps of the artillian grapple each have a set of hoses...so we need 4 ports...the ports are really tee'd together in that box...so simply a splitter.
Can you use the Artillian 3rd Function Diverter kit on new thumb you put on your backhoe in your other video
I think it would be possible.
@@TractorTimewithTim thanks
Hi Tim what fuse size did you use I cut the inline 10amp and looks like it only needs 4amps? Wired it directly to the fuse box like you did, thanks for the video.
Hello Tim, why do you need 2 celluloids? an why do you have the double diverter kit a T fitting could do the trick??
Mighty Moe Excavating wishes you all Merry Christmas and thanks you for the entertainment! Artillian can ship me attachments anytime!
Merry Christmas Mighty Moe!
Great video Tim just wondering with how much work they put into the overall construction of this kit, why they couldn't come up with a button built into the knob of the control handle. It's just the zip stripping of the button looks a little tacky with how nice everything else looks.
Fair question, Brian.
Tim, do you ever find that a true 3rd function would serve you better than a diverter, if Johnny had the hydro flow to run it?
For the grapple, no. The diverter is perfectly fine.
I’m on and off the button so quickly and without thought that it doesn’t have any negative impact.
Like the video Tim and Katriel .
Thanks Leo!
Save your lines, use line wrenches "fuel line wrench".
If my 1025r already has the factory installed 3rd function hydraulics in the front, will just the splitter work to achieve the double claw action? Thanks Tim and awesome videos! Keep em coming please.
I’m not sure you want fully independent claws anyway. This unit will not add that functionality.
@@TractorTimewithTim thanks for the reply. I didn't mean independently I'm sorry. When I said the double claw action, I meant so I could run two claws instead of just one. 3rd function controlling the grapple but because I wanna run two like you, I need the splitter. So I'm assuming the splitter just would tie into the factory 3rd function and then adding the splitter would give me the ability to run two grapples?
Any ‘T’ will provide the necessary function. You can buy the splitter portion from artillian...without the actual diverter kit.
Have you ever thought of installing the single point hydraulic for the loader hookup? Would this kit still work either the single point hookup?
I have thought about it. I would really like to have one. Christy's fingers simply aren't strong enough to remove the hydraulic hoses as they are now. We tried a single-point on a 2038R at the Farm Progress Show. She could EASILY handle that.
Also, we have tried the one on the Kubota BX2680. Again, it was easy for her to operate.
I suspect the Artillian kit would need a bit of modification (hose lengths might be wrong), but yes, it would work with the single point.
Tractor Time with Tim thanks for the reply! If you ever do decide to do one could you do the video of the installation and a parts list. Thanks for all the great videos my fellow Hoosier!
Hi Tim, I have a 1025R like yours. Actually I think they are related, maybe cousins? Is there somewhere that you have listed all the parts you needed to do this grapple including the grapple that you could send me?
I would love a video on how to get all those floor and Sterling column prices off.
I don’t understand, Ben. Did auto-correct corrupt your comment?
Tractor Time with Tim yes it did. I ment floor and steering column pieces off. I have been wanting to do something like this for a wile now bit dident know there was a kit like this available
did you check the hyd oil level
Yes, but only after one of the hoses came lose and leaked some oil. After fixing the leak (by tightening one of the connections), I added a pint or so, no big deal.
Hi Tim, I have a 2016 1025r with a 266 backhoe. I think the same setup as yours in this video. I also have hydraulic deck lift. Question is, since the Artillian is a diverter for the loader SCV, everything else should remain and work the same, correct? Thanks, Chris in Maine.
Yes.
I have a 1025r TLB with power beyond with the H120 loader. Would you still recommend the Artillian kit and spitter for the 2014 1025R?
Hi Tim,
I watch every new episode you put out. Been wondering what is the brand name or where did you purchase your workbench in this video? Thank you!
Here is the video about it: Seville UltraHD 12-Drawer Rolling Workbench/Toolbox Unboxing, Assembly, and Review ua-cam.com/video/Q63vwr4EOTg/v-deo.html
@@TractorTimewithTim Hello. Интересные видео у Вас, всё красиво и аккуратно. У нас к сожалению не так..((((
Может можно какие субтитры на русском языке сделать, а то не понятно о чем говорите. Спасибо.)))
Tim can’t you use an add-a-fuse?
I enjoy your videos by the way. Is there any way you could send me a complete parts list with prices for everything you installed. I just bought a new 5 foot grapple and was unaware of the extra parts needed. Lesson learned. Any help would be greatly appreciated
Artillian.com. The diverter kit is complete.
Love your vids, Question, Is there a attachment that will mow ditches? Preferable from the front?
There is not. Some folks have built one, by attaching push lawn mowers to large arms off the front.
Another approach is to use a sickle mower. Very expensive, but will do the job.
You guys are luck that is a cool set up ! looking forward to see the video of it ! Merry Christmas from my family to yours ! God bless ! Curt :-)
Thanks Curt!
so where is the link for the electrical parts you had to order in order to connect to the fuse block?
Sorry. Napa 725452
This guy going to mess around and make me end up buying a JD instead of Kubota lol
Ha!
thank you
Wow! that looks awesome! but my goodness it sure looks heavy. HOw much does it weigh? the front end sure bounced alot when you went up and down. does it effect your lifting capacity?
There are many configurations. The minimalist configruation (1 clamp in the center) is 163lb. The configuration I'm showing in this (and the next two) video(s), is 311 lbs.
Ahh. i was just curious!
Now that you have the diverter valve, will the plow be going on the loader?
I do not (yet) have the necessary hardware to attach. ...but maybe someday.
Well should I get lucky enough to get the grapple I'll at least know what to expect when it comes to the diverter. Thanks!
You could really use it...
Merry Christmas!
Merry Christmas!!
DID U HAVE TO ADD ANY MORE HYD. OIL AND CAN U BUY A NEW HANDEL WITH WIRES ALREADY IN THE HANDEL
You need oil to fill extra hose and cylinder. Fasse has a switch incorporated handle.