That's a really nice upgrade! By the way, what tweezers do you use? I have a cheap pair and they suck. Your seem to be long and stiff. Make / model? Thanks!
I want to know data recovery cost of drop hard drive which is not open yet and i also have same donor drive with same model and dcm number matching with closed manufacturing dates
I do solder mostly as a hobby, but almost most of them are under a microscope. I found for me the best way to avoid the fumes, is to work near the big glass door in my home that I can open, put a regular 6-7 inches 220V fan, and by this way blow all the fumes away. I have a problem with your way. It does blow fumes down, but not inside the nosule of s fume extractor. It can blow around it as well into the room (you just could not smell it because it will be so diluted with air).
I can't see how fans blowing the smoke away will guide it to the door. open door will create draft and your room will have the smoke in it. My intake blower takes out most of it, and what gets up with the helper cooler fan, use to escape up. Now, it does not have a way to escape and is guided towards the inlet.
Any flow don't like 90° corners, try fewer corners or use 2x 45°. the exhaust need to be at leest 2.5m away from anny window or inlet. you are creeating a vacuem in this setup and wind wil blow everyting back in youre room . use a smoke maschine an you will see.
There are really cheap, battery powered "personal cooling fans" that fit around your neck. You're supposed to put it on the back of your neck/shoulders and point the fans toward your face. They cost like $5. What I have done for a long time to achieve this effect is to just point them down and away from me. So if you can imagine two small fans that seem to come out from my upper chest, you'd have a general picture of it. Works fine and they don't get in the way. Yes, you have to essentially wear them but they work. I recharge about every other day and it works fine but I would obviously like an non-wearable solution like this one, lol.
I have 120mm fan (usb cable connected to step up controller module which pumps from 5v to 10v) hanging on my microscope in front of me just to push away smoke from my face
intake noise? I actually just picked up DJI mic that has noise cancelation. Have not giving it much testing yet, but I honestly like the sound of the blower in videos
That's a really nice upgrade! By the way, what tweezers do you use? I have a cheap pair and they suck. Your seem to be long and stiff. Make / model? Thanks!
I've had these for like 7 years. www.unionrepair.com/vetus-hyperfine-high-precision-non-magnetic-anti-acid-tweezers-ss-jp.html
@@hddrecoveryservices Thank you!!
I want to know data recovery cost of drop hard drive which is not open yet and i also have same donor drive with same model and dcm number matching with closed manufacturing dates
I do solder mostly as a hobby, but almost most of them are under a microscope. I found for me the best way to avoid the fumes, is to work near the big glass door in my home that I can open, put a regular 6-7 inches 220V fan, and by this way blow all the fumes away.
I have a problem with your way. It does blow fumes down, but not inside the nosule of s fume extractor. It can blow around it as well into the room (you just could not smell it because it will be so diluted with air).
I can't see how fans blowing the smoke away will guide it to the door. open door will create draft and your room will have the smoke in it. My intake blower takes out most of it, and what gets up with the helper cooler fan, use to escape up. Now, it does not have a way to escape and is guided towards the inlet.
Any flow don't like 90° corners, try fewer corners or use 2x 45°. the exhaust need to be at leest 2.5m away from anny window or inlet. you are creeating a vacuem in this setup and wind wil blow everyting back in youre room . use a smoke maschine an you will see.
great points!
Nice! :) What soldering iron are you using? doesn't look like the JBC precision? i need a new one :p
JBC c245 handle
thanks! :)@@hddrecoveryservices
do you have services in india
hello sir i am from india few days ago i formatted my file from my sony mark 3 camera and overwrite shot on it. How can I contact you please help me
if you overwrote there is no need to contact us dude, data is gone
Hello, i have shipped my Sandisk SSD Pro Extreme to you. I hope you can fix it. Thanks.
you already shipped it? to Canada Ottawa?
I emailed you just a minute ago, can you forward me the tracking number on the ticket?
There are really cheap, battery powered "personal cooling fans" that fit around your neck. You're supposed to put it on the back of your neck/shoulders and point the fans toward your face. They cost like $5.
What I have done for a long time to achieve this effect is to just point them down and away from me. So if you can imagine two small fans that seem to come out from my upper chest, you'd have a general picture of it.
Works fine and they don't get in the way. Yes, you have to essentially wear them but they work. I recharge about every other day and it works fine but I would obviously like an non-wearable solution like this one, lol.
Oh yeah, I definitely seen those.
I have 120mm fan (usb cable connected to step up controller module which pumps from 5v to 10v) hanging on my microscope in front of me just to push away smoke from my face
Nice, you could 3d print shroud
Yeah that's what we will get done
Is the brand of Flux @0:27 the 2uul Brand?
it is not the worst stuff to be honest. For the price it is a great option, but stinks
Or work outside. Work in asia bro. See real damage
Where you from originally?
Russia
@@JohnGotti__Not sure what to tell you, Erkin has talked about it before and his surname couldn't be any more of Russian origin...
@@buildstoys Yep, he mentioned it previous vid I think 👍
@@buildstoys Ok than. Thanks for the info.
You need a front kitchen smoke extractor and the door must be behind you
PUT A MASK ON
Now use AI to filter the roar out of your audio?
intake noise? I actually just picked up DJI mic that has noise cancelation. Have not giving it much testing yet, but I honestly like the sound of the blower in videos
لطفا ترجمه فارسی هم اضافه کنید
Youre wearing a limp bizkits Chocolate starfish and the hotdog flavored water shirt. Clearly its too late, the fumes have gotten to your head.
bwaaaahahahaha. So right about that :)
What you need is a fume hood 😉
Use the red wire
:)
لطفا ترجمه فارسی هم اضافه کنید
لطفا ترجمه فارسی هم اضافه کنید
لطفا ترجمه فارسی هم اضافه کنید
لطفا ترجمه فارسی هم اضافه کنید