S2000 All Motor Tuning Series Intro
Вставка
- Опубліковано 29 сер 2024
- Today we look at my current all motor setup and discuss the mods we will be installing in this mini series to pull as much all motor horsepower possible out of my F20C engine.
Check out @BalladeSports
balladesports.com
/ balladesports
/ balladesports
Ballade's Spoon Mono vs Twin Block Calipers: • Spoon Twin Block vs Mo...
Support our channel and get some apparel at: slipanglemedia....
Listen to our PodCast The Corded Tire on ShoutEngine: shoutengine.com...
Reserve a seat with one of our webinar reviews with a chance to take home that part for free!
www.slipanglem...
For regular updates follow:
www.slipangleme...
/ theslipangle
/ garagequinnmotors
/ garagequinnmotors
/ slipanglemedia
@GarageQuinnMotors
@TheSlipAngle
#GarageQuinnMotors
#TheSlipAngle
The Slip Angle Crew:
Matt Wiser:
/ matchew_mx5
Music Tracks:
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
Shout out to Quinn for being able to do that entire intro in one take with no preparation…
Lol 😆
This is one of the best no bullshit channel,s for car enthusiasts on the tube....for real world working class dad's and mums,just shows that you don't need exotica big buck cars to live the dream.
That s2000 sounds so sweet....maybe the best sounding four pot there is....love it.
I'm an Rx8 owner in the UK, learnt alot from your build on your own car.....I hate to think of a day when internal combustion is over, god bless the boys behind the hydrogen projects we keep hearing about to keep our dreams alive over electric boredom that seems like a bad dream.
Keep up the good work boys.
Thank you brother. We are glad to hear that!
underrated channel. Never have i learned so much in so little time.
🙌🙌🙌
As an AP1 owner, I am hyped for this!
I would like to see LHT performance do a comparison on that intake compared to their stock intake with airbox mod because every intake that they have back to back tested on their stock AP2 has not made more HP then their stock intake with airbox mod
I think he saw your post because he just did this on Thanksgiving. The basic takeaway is that you can't do much better than the airbox mod; you end up spending big buck for 1-2 horsepower in a small part of the band.
The Spoon headgasket and machined head really made the Timing Gear beneficial.
On a non-machined bolt on engine it wouldn't see the same gains.
I can't wait to see how this turned out for you Quinn!!
The gear is actually going to help correct the cam timing that got retarded from the .027 off
Great video! Looking forward to more content! My F20C with the ballade header & cams + k&n fipk, 70mm decat exhaust and flashpro made 230whp.
Awesome!
The S2K is back!!!!!!!!!! ❤️
Hell yes!
Excited to see the s2000 get some love again! Can’t wait 🤙
Cant wait for the updates. Great start on a very interesting topic
Very excited for this series! Enjoy the in depth info on the motor and setup differences
Thank you Mike!
Really nice to see the honda back. I am a hardcore fan of the channel cause i share the same view for cars and driving. I don't know the economics on this build. From my point of view i would just install a rotrex as i think is the best solution per buck while it doesn't compromise the character of the engine
Oooooooh that looked like a one shot. WHAT A FUCKING BALLER. Research, development, all sorts of informational goodies about the platform, and he's good looking. In a one shot. Nice!
Thank you Sam!
Awesome video. Love all the technical info!
Oh man I can’t wait to see the results
love this car, hope to have 1 some day
It's like a masterclass, really cool video 👌
Really excited for this series.
Great video, excited to see some more in depth engine content. Also fire up that milling machine because my k24 is running 12.5:1 on 93, so get that compression up.
Can't mill as much off the S2000s head but a 2.2 and higher comp might be in the books down the road
Have to agree, very thorough video. Well done Quinn!
Thank you Bruce!
So pumped for this series.
Yes!
Hey mate. I did an AP1 All Motor build. 75mm custom intake pipe with 4inch k & n filter, 70mm ballade throttle body, ported intake manifold, ballade big tube header, Berk 76mm exhaust, e85 with 550cc injectors, car made 223hp here in Australia. Aparently our dynos always read lower too
Thanks for this! Definitely look forward to the rest of the testing. Great info presented at a level that everyone can understand.
We're glad you liked it! 🙌
Things are heating up! Love it!
Yes!
Great video
Thanks!
Word up on the collector design. Recently had a big 1.2l blower Miata with rare BOIG header. The collector was much larger and the car made significantly more power with less boost. Sound changed as well.
🤙🤙🤙
I remember that in the video where you installed the Advan RG you introduced the motor. I guess I'm just an old follower :) interesting to see the dyno and to hear where you wanna go with the build. I'm starting to modifying mine, which I didn't dare to until now, still entirely OEM and I'm very excited about it. The car is low miles, entirely OEM, european 2006, so it's still an AP1, I feel we are the lucky ones in this case :)
Awesome man!
I am looking forward to the next videos! Keep it up! Greetings from Germany
Awesome man!
Awesome information. Subbed. Can't wait for the next video.
Thank you!
K swaaap a miata. NB with all motor bp engine, an NA k swapped all motor, and s2k all motor. What a great trifecta.
Well myself I'm all about that supercharged life with the s2000's FRM (fiber reinforced metal) liners and the usable power the supercharger brings with not taking away from that beautiful f series all motor feel and the needed torque it is begging for boost but I'm also a big ran of the N/A road also and I'm more excited then if it was supercharged build cause I love N/A S2KS I've been mostly focused on the supercharged road so it will be a good change for me combine that with your insane passion and attention to detail both with the build and video it's gonna be a bannger very excited on my second s2k 1st 08 laguna blue sold now have a 2005 black 38 000kms last year for the cable throttle body before they went drive by wire I personally loved the feel of the 2005 more nothing like that mechanical connection to your foot I did notice the difference with both the drive by and throttle cable the drive by wire was not as responsive well good luck with the build one subscriber here from Canada that will be pouring over them details all the best cheers
i just installed a spoon snorkel and the feel at speed is crazy
Definitely noticeable!
That intro shieeet!!!! Looking forward to the results.
Yeah buddy!
More displacement or you won't gain much no matter what. Header and Balladecams did push my F22c quiet a bit further. The Cams did a lot down low but gained nothing up top.
We'll see 🙂
Nice car. VTEC is underrated if that's even possible to imagine. Most don't realise how absolutely massive the big lobes are. Even the factory cams are bigger than most race only cams for other engines. F20c IIRC is something like 13mm lift and over 300 degrees duration. That's insane.
If it had manual steering it would be for men but as it stands a humble NA6 stripper is more manly to me.
I agree on the VTEC. People remove the electronic steering pump, but it's so good I don't know why you would.
Hi Quinn, if you are concerned about the complexity that an ITB introduces you could consider the PracWorks carbon intake manifold
Is there any relevant test data for it? A lot of manifolds look good on paper but don't perform how people want them to
@@TheSlipAngle I’m running it myself. A lot of manifolds don’t work that’s true so I was prepared to be disappointed but the result was excellent . Had DM u on insta
@@RacingS2000 What other mods are you running and how did the part affect the car? This is the next part on my list as I have finished the exhaust side and am working on the intake side
Damm bro haven’t heard T1R in a minute love their parts for the 2008 Honda Fit
I think you should consider Urge scavenger midpipe. I use complete exhaust, which was developed by Gernsby and it helped the midrange alot!
Do you have a dyno of before and after?
Very nice, pal!
sick! Love the R and D. Hopefully you have plenty of dyno time.
Thank you. We did! Stay tuned into this series 😉
This video is literally car p0rn. So good! I really enjoy you going down the NA-build path. I have an 06+ S2k so I am debating going the S/C route. I just don’t know if the F22C1 would respond as well to all these NA mods like the F20C does, but I’d be curious to hear your thoughts Quinn!
It would respond better actually with the bigger displacement
I'm Hooked! Keep it going!
🙌🙌💚
Professor Quinn holding class 👍
School's in session 🤪
Intro*
Fixed
@@TheSlipAngle Didn’t want to be that guy but wanted to help ya out
Awesome video, thx for the info. Although, I'm a S2000 rookie ('02 sebring silver), and I still don't get why is it sooo hard to get more NA hp. I feel like it's too much work for 30-35 hp.
The engine is already really efficient but there is still meat on the table
It's called passion for your subject ;) :).
PS. About time :p.
😉
This is exciting because i own a prelude and well.... the s2000 kind of evolved from the prelude. And im working towards making it better aswell.... even if i dump all of my money into it lmao
I love all the green in the engine bay. Was that a package sold somewhere or is it custom?
Metalcast green on the valvecover and anodized aluminum hardware from various sources
Nice build, did you upgrade the valve retainers, keepers and oil jet bolts with AP2 parts?
Supertech Titanium Retainers
No ITB' s keep it like this, maybe test out a the skunk2 intake manifold if its better than the oem one..
A reputable tuner friend tested the manifold and said you need bigger displacement and big cams to make use of it
@@TheSlipAngle i agree.. Not much can be done to improve anything around the motor..
No cheap HP
Btw i got a rx8 for my wife and am did basic stuff on it... Totaly different cars my s2k and rx8 but both worth having..
I cant wait to see what u make of your project - the results i mean
Hey Quinn, it sounds like a dream build for you would be a F20C NB Miata, outside of your FD, you seem to love the compact dimensions and weight of the NB and the engine and drivetrain of the S2000. Just curious, what would your dream engine and chassis combo be?
A lighter S2000 that has at the limit behaviour of my NB. I'm determined to do just that. Stay tuned
Hey there,
What valve spring rate did you go with for the valve springs? Also how did you figure out which would work best for you?
Supertech Dual Springs. I wanted singles because I didn't need that stiff but they were not available at the time.
kinda related kind of unrelated. i have an 03 NB shinsen that’s pretty clean with no rust and 55k miles with just coilovers, wheels and tires. but i want more and i’m torn between turbo charging my nb with a stage 1 FM kit and just buying an s2k. I do enjoy the NA type of feeling but i’m also into turbo power and excitement. do you have any tips or words of guidance for me as i try to make my decision?
Go drive one and see 😉
Has anyone fitted a Js racing T-rev system to their F20C yet and got any feedback?
I never heard of it but I just looked it up and it sounds very interesting. I'd be curious to hear reports about this too!
good video, any chance an aftermarket intake manifold would help?
Yes it would but the problem is that no one seems to make one that works well with smaller displacement and milder cams
Where's Hector
would Urge scavenger exhaust work on your setup? I know it was best thing you could do for midrange power on F20C. But not sure in combination with your set up...
I'm not sold on the gern pipe thing
Have you changed piston rings and all the rod and main bearings? You mentioned a lot
The bottom end is untouched
Ballade 70mm exhaust already off the car? Whats the reason?
No it's still on
@@TheSlipAngle cool. Were you look into Urge header? Or the HKS with twisted pipes?
@@coffeemonstar2 I did. Not sold on the Urge for higher comp, bigger cam engines. HKS header has crappy collectors
Is that an SKS stock leaning against the wall I see?
Yup lol
All on stock ecu?
Haltech Platinum Pro
It's almost like Quinn knows what he is talking about... 😺
Almost lol
i had an EP3 Honda civic back in 2004.... 2l 197bhp stock... vtec on that was i think 4250rpm.... then onto 8300rpm... i dont know honda engine codes... is it the same...?
my then pet cat whiskey...loved it...
i will put something ont the insta..
as always...following...
N x
“This fool’s running a Honda 2000” ..
Turbo miata's 😆
Come on man
You probably could not handle a turbo s2k they are beasts
Injectors/fuel pump/clutch
That is all you need to support a turbo kit on a S
450 whp
On less then 1 bar of boost on pump
Every thing else stock
Mx5 are for girls
I have an FD making that power and the chassis is better suited for it than the S2000.
Тuning анг.- настройка , регулировка,тюнинг дословно настройка и регулировка радиоприемника. От производного слова тюнер-приемник.. Improvement анг.-усовершенствование. Painting .анг.- покраска. Remake анг. -переделка .Да у автора явно с английским сильно напутано. Посмотреть в переводчике слово не судьба была ? Наверное слово модернизация забыл, от анг. модерн современный.Моё личное мнение.
first!
No no no... "is like a miata... But worst!"
So the fluid damper is ok to run on stock internals? somebody on S2000 forms said it was harmful at low RPMs on a stock internal engine??
It's better than the stock harmonic balancer. You don't want to run a lightweight pulley that has no harmonic balancer
This is some cool info right there!!! 😎🤙
🤙🤙🤙