I wanted to say thanks to Cody for the great video. Followed it and was able to drain my coolant and get everything put back together. Keep up the great work on your great videos.
I bought this very year and color bike couple weeks ago. Replaced my 1500. Thanks for sharing...will be very helpful when I get ready to do this. AND...love you attention to detail. Wish you were in my area!!!!
I'm going to try this. I just removed the lower cowl to bleed the clutch. Thanks for showing me that I put it back on wrong .😀 I have a 2015 that I punctured the overflow bottle putting the bike on a trailer last year. The dealer replaced the bottle, and I'm pretty sure they put green coolant back in there. Do I need to do that distilled water flush you were talking about? Also, when you do that, do you fill the whole system, including the overflow bottle with the distilled water?
We get slammed in the Spring and often, videos go by the way side. I totally understand. My videos lack in the Spring too. Great to see a new video from you Brother Cody! Cheers!! Zip~
Excellent video. I have a 2014 Honda Goldwing Valkyrie 1800C. I took it to a Honda dealership for a coolant flush..I bought it new in 2016, I keep her very very clean.. When I got it home, I noticed the right side lower cowel was loose, the left side was tight, it's never have the cowel removed before. I haven't taken her back yet, babysitting duties, but will this Saturday. I haven't looked at the 3 screws yet or the 2 pop pins at the top. What would be your recommendation to me to look at first to figure out why it's loose, before I go back to the dealership. Thanks a bunch...
What can you do if your aux does not work. I think I plugged a bad flash drive in and the aux has not work since. I have a 2017 GL 1800 navigation, audio system
funny to see this video on today, as i was feeling its getting time to change the coolant out in my wing. ( 08 gl1800) appreciatory valve wide open for the "class"! keep up the good work!, later.
Maybe someone can help me out. 96 Honda Shadow Ace. New charged battery, good compression 125-135 psi, spark on all plugs bright blue, very clean carb with new gaskets, still won't start. And yes the gas is on, in neutral, kickstand up, clutch in, killswitch to run. When I tried to use starter fluid on the carbs it shot the fluid back at me. Timing issue?
Gracias por tu vídeo , es excelente, puedes decirme cual es la medida de la llave para soltar el tornillo de vaciado de agua? Thanks for your video, it is excellent, can you tell me what is the size of the key to loosen the water drain screw? greetings from Spain
Cody, this vid just popped up and I decided to watch since I may ditch my Harley and get a GW. I like your style. I know that GW has a crap load of plastic body and it somewhat intimidates me. Are you located on the west coast? Should I get a GW I'd like for you to work on it. I started out on a Honda (owned 3. A 175,350 and a 71 750), so I might end up with a GW. I'm subscribing so I can binge on your vids. Again great content.
i dont even think you would need to take the fairing lower off. even then i think id just dremel an area in the fairing lower plastic so that i could drain the coolant with out taking it off. plus it would give me better access to get the oil filter wrench in there.
Hi Cody, Did Honda lengthen the bottom of the lower cowl. I have an '05 GL and have never had to remove the cowl. Thanks for taking the time to pass on knowledge.
what is you best time doing the air filter change? by myself taking my sweet time and being very sure to not leave anything disconnected like the radio antenna 2.5 hrs. another great project is adjusting the slack out of the cruise control cable. not as bad as the air filter but still a lot of plastic has to come off. keep the videos coming.
Cody. Great video. you just verified to me that my coolant is okay and when it needs replaced, I will bring to you. Damn, why did honda make it so hard (have to pull so many parts) to replace coolant?
Whew the '01-10 is so much easier, Drain plug right by the oil filter you dont need to remove cowl or anything and raidiator cap right under storage box easily removed..👍
changed my coolant and now getting hot not sure what happen any body ?? its the right kind of coolant will air in system cause it to get hot or show hot ??
Thanks very much for the clear video. I am wondering if doing my oil and filter at the same time would be good timing. Since I can squeak out the filter without taking the cowl off I am wondering if I can squeak out the coolant drain bolt while the filter is out. I plan to use the 8mm, a universal joint with an extension might work. I have taken the cowl off once to do the clutch fluid change but hoping I won't have to if not too hard. Has anyone else tried this with the oil filter off?
So he only put in 3 quarts I was told it should take 4. I put the 4 th in the overflow was in the marks but at the top indicator Went riding. Fine at 60 mph. Ur went through a fast food place and it overheated and coolant came out. I bet I need to suck out fair amount of fluid from the overflow. Any thoughts welcome?
Can someone answer my question real quick. I took off my pod filters and used my hand to block off the intake from each carb, all but one spit out fuel. when I put my finger on the air mixture screw on the one that doesn’t spit out fuel the engine won’t bog down like the others do. Whats wrong with that one carburetor? The slide does go up though when I block it, just no fuel comes out and it doesn’t bog the engine
There is no need to remove the front lower cowl. This link shows how to drain the system without splashing or loosing a drop. Mouse click each photo thumbnail to enlarge: gl1800riders.com/forums/members/22132-gatorwing-albums-coolant-drain.html
I deal with chemicals 9 hours a day. Anytime I can keep them off my hands, I’m game. I’ve seen techs fingers in the business with over 30 years of damage. I’ll pass.
Good video. I was expecting to see all the way, including the plastic bottle level at the left side, but didn't happen. Than, what's up with the gloves? I always work with my bare hands, and I don't have any issues getting dirty hands. Gloves = waste of money 💰 for us. In your case was donated
As you get older, you get wiser. I never wore gloves either, but since my 9 to 5 job is in a "white collar" setting, I can't be going into the office with black fingernails, and cuts and abrasions all over my mitts! I didn't used to wear a helmet either, but now, I always do. Same with riding jackets, and riding gloves. I even take rain gear along with me now, when I go on long-distance rides!
coolant once a year or every 16-24k? get serious. that is WAY overkill. my '12 has 61k on original coolant with nary an issue. I'll probably change it sometime this year (average of 10k/year).
"No more wasting your time," goes to ten second intro video and then a commercial, then a one minute product placement for fucking gloves! Gloves are for cold weather, guys. How can your fingertips and palms do their jobs when they are covered by gloves? How can they feel stuff?
Is it free? You made me pay for it with my attention on commercials. That's what commercials are: an exchange of my valuable time for an effort to warp my sentiments into buying something I didn't want and I don't need. I get you are trapped in the capitalist system by UA-cam and the US system. Don't make me a part of your sick cycle.
HAHAHAHAHA. I took your time..? That you gave away so freely. I didn't force you to waste your time. You did that on your own. So who is trapped? As you continue to throw away your time. Both reading this and watching more and more videos and more and more commercials. I can feel that you are a generally un-happy person. I am sorry about that. Have a great day man!
I wanted to say thanks to Cody for the great video. Followed it and was able to drain my coolant and get everything put back together.
Keep up the great work on your great videos.
I bought this very year and color bike couple weeks ago. Replaced my 1500. Thanks for sharing...will be very helpful when I get ready to do this. AND...love you attention to detail. Wish you were in my area!!!!
Hi from New Zealand. Your the man!!! Love your F6B stuff.
Cody, can you do a instructional video on air filter replacement?
I'm going to try this. I just removed the lower cowl to bleed the clutch. Thanks for showing me that I put it back on wrong .😀 I have a 2015 that I punctured the overflow bottle putting the bike on a trailer last year. The dealer replaced the bottle, and I'm pretty sure they put green coolant back in there. Do I need to do that distilled water flush you were talking about? Also, when you do that, do you fill the whole system, including the overflow bottle with the distilled water?
We get slammed in the Spring and often, videos go by the way side. I totally understand. My videos lack in the Spring too. Great to see a new video from you Brother Cody! Cheers!! Zip~
I found discussion about coolant colour (green vs blue) most helpful; thanks!
Excellent video. I have a 2014 Honda Goldwing Valkyrie 1800C. I took it to a Honda dealership for a coolant flush..I bought it new in 2016, I keep her very very clean.. When I got it home, I noticed the right side lower cowel was loose, the left side was tight, it's never have the cowel removed before. I haven't taken her back yet, babysitting duties, but will this Saturday. I haven't looked at the 3 screws yet or the 2 pop pins at the top. What would be your recommendation to me to look at first to figure out why it's loose, before I go back to the dealership.
Thanks a bunch...
What can you do if your aux does not work. I think I plugged a bad flash drive in and the aux has not work since. I have a 2017 GL 1800 navigation, audio system
funny to see this video on today, as i was feeling its getting time to change the coolant out in my wing. ( 08 gl1800) appreciatory valve wide open for the "class"! keep up the good work!, later.
What about if no coolant come out. it look full. And nothing come out. ?
Thanks for taking the time to share 😊
Great video, my speedometer on my gl1800 2012 stopped working while riding in Europe you think something came loose from rough roads..?!
Thank you so much for posting this; I used it to change the coolant on my 2012 and it was very clear. Success!
My 08 No removal of that pesky lower cowl
6 in extension and 5/16 socket got to drain no problem
Sorry, I would like to know the location of the heat sensor nut for Honda GL 1800 engine
Maybe someone can help me out. 96 Honda Shadow Ace. New charged battery, good compression 125-135 psi, spark on all plugs bright blue, very clean carb with new gaskets, still won't start. And yes the gas is on, in neutral, kickstand up, clutch in, killswitch to run. When I tried to use starter fluid on the carbs it shot the fluid back at me. Timing issue?
Was that a Carnival Cruise Line Towle I saw you using for a parts pad?
Where's the coolant fill on a 2003 Goldwing GL 1800 located
Thanks for showing me I don't have to remove the evap canister or the bracket as is told to me in the manual ...
Is there a big difference between a 2012 and a 2010 which I own?
Gracias por tu vídeo , es excelente, puedes decirme cual es la medida de la llave para soltar el tornillo de vaciado de agua?
Thanks for your video, it is excellent, can you tell me what is the size of the key to loosen the water drain screw?
greetings from Spain
So do we need 3 bottles of coolant?
Thank you for explain. .. what kind of coolant can I change
:-)
thanks Cody, I began to think you might be on a holiday, then.... bam...another motorcycle md video!
:-)
Ugh sorry for the distance!
TheMotorcycleMD
no worries and definitely don't apologise. I seriously did think that you was on a well deserved break!
rsmf
:-)
Cody, this vid just popped up and I decided to watch since I may ditch my Harley and get a GW. I like your style. I know that GW has a crap load of plastic body and it somewhat intimidates me. Are you located on the west coast? Should I get a GW I'd like for you to work on it. I started out on a Honda (owned 3. A 175,350 and a 71 750), so I might end up with a GW. I'm subscribing so I can binge on your vids. Again great content.
Thanks Freddie! Ditch the Harley and get that wing! “Recommend any of the 1800s after 2006!” Very little maintenance and it will take you anywhere! 👍🏻
How do you check the trannnyforaglodwing 1800model2003
Nice video but you didn't need to take that fairing off,at least not on my 2015 f6b.the drain is by the oil filter
i dont even think you would need to take the fairing lower off. even then i think id just dremel an area in the fairing lower plastic so that i could drain the coolant with out taking it off. plus it would give me better access to get the oil filter wrench in there.
I appreciate the care you take.
Hi Cody, Did Honda lengthen the bottom of the lower cowl. I have an '05 GL and have never had to remove the cowl. Thanks for taking the time to pass on knowledge.
Your information was greatly appreciated. Thank u sir
Great video! Great Instruction! Thanks for sharing!
great video. and just in time i am doing mine this weekend. how about and air filter change on a gl1800 goldwing? that can prove to be fun.
AH this infamous, GL air filter. When I get another one in. Ill see if I can record the sea of parts and harness removals lol
what is you best time doing the air filter change? by myself taking my sweet time and being very sure to not leave anything disconnected like the radio antenna 2.5 hrs. another great project is adjusting the slack out of the cruise control cable. not as bad as the air filter but still a lot of plastic has to come off. keep the videos coming.
i actually done that on my 08, through a youtube video. not too bad. patience is the key. and time, obviously. good luck!
very time consuming. i am waiting for winter so i don't fried my brains out. i liver in very sunny florida.
Great video,I think am familiar with your shop, you guys are the best
What about changing it on a 2003 Goldwing 1800 is it the same where the bill is high school tonight are the field located
What about the changing it on a 2003 Goldwing 1800 where is the coolant fill is it the same Spanx
Great Video, very professional.
Great Video! Thanks for your time!
Cody. Great video. you just verified to me that my coolant is okay and when it needs replaced, I will bring to you. Damn, why did honda make it so hard (have to pull so many parts) to replace coolant?
Because the all the internals are literally covered in plastic!
If you think the cowl is difficult… try changing the air filter !!!!!
😩😩😩😩😩😩😩
Great easy to understand video. Seems easy enough.
Whew the '01-10 is so much easier, Drain plug right by the oil filter you dont need to remove cowl or anything and raidiator cap right under storage box easily removed..👍
Fantastic vid. Great job.
Love this video you and a friend of mine help me alot I have a 08 wing ty. Excellent video....
FYI... There is no need to remove the cowl and the sealing washer is copper, not brass.
Sweet. Gonna do mine soon.
Great video …. Off to the garage…😁
changed my coolant and now getting hot not sure what happen any body ?? its the right kind of coolant will air in system cause it to get hot or show hot ??
You have air in the system, you need to burp your radiator and add coolant.
Thanks very much for the clear video. I am wondering if doing my oil and filter at the same time would be good timing. Since I can squeak out the filter without taking the cowl off I am wondering if I can squeak out the coolant drain bolt while the filter is out. I plan to use the 8mm, a universal joint with an extension might work. I have taken the cowl off once to do the clutch fluid change but hoping I won't have to if not too hard. Has anyone else tried this with the oil filter off?
Great tutorial. i'd let yo work on my honda!
What’s up Cody!! Support comment keep up the videos!!
Thanks James!! Your support is appreciated brother!
TheMotorcycleMD I do when I can bro!!
Sir I need your halp plz
How do you re-install a seat on a 2014 goldwing. Talk about insane!
Nicely presented video…however an Airlift 550000 would make this coolant change so much easier.
Great video 👍
Thank you!
Very informative, well presented have fun, ride safe.
Awesome video
Brilliant video, thanks.
Top man, well explained, 🇬🇧👍
Great job! Thank you.
Excellent vid....Thank you.
So he only put in 3 quarts I was told it should take 4. I put the 4 th in the overflow was in the marks but at the top indicator Went riding. Fine at 60 mph. Ur went through a fast food place and it overheated and coolant came out. I bet I need to suck out fair amount of fluid from the overflow. Any thoughts welcome?
Great video
Great video, thank you.
Can someone answer my question real quick. I took off my pod filters and used my hand to block off the intake from each carb, all but one spit out fuel. when I put my finger on the air mixture screw on the one that doesn’t spit out fuel the engine won’t bog down like the others do. Whats wrong with that one carburetor? The slide does go up though when I block it, just no fuel comes out and it doesn’t bog the engine
There is no need to remove the front lower cowl. This link shows how to drain the system without splashing or loosing a drop. Mouse click each photo thumbnail to enlarge:
gl1800riders.com/forums/members/22132-gatorwing-albums-coolant-drain.html
Thank you.
so, you only put two bottles in?
Can you tell me why you were wearing gloves at all during this?
I deal with chemicals 9 hours a day. Anytime I can keep them off my hands, I’m game. I’ve seen techs fingers in the business with over 30 years of damage. I’ll pass.
Thanks. I wondered if you had a allergy or something.
Hi sir who are you
Good video. I was expecting to see all the way, including the plastic bottle level at the left side, but didn't happen. Than, what's up with the gloves?
I always work with my bare hands, and I don't have any issues getting dirty hands.
Gloves = waste of money 💰 for us.
In your case was donated
As you get older, you get wiser. I never wore gloves either, but since my 9 to 5 job is in a "white collar" setting, I can't be going into the office with black fingernails, and cuts and abrasions all over my mitts! I didn't used to wear a helmet either, but now, I always do. Same with riding jackets, and riding gloves. I even take rain gear along with me now, when I go on long-distance rides!
🎅 👍
👍
Me first comment yes!
For the win 🙌
TheMotorcycleMD I'm a weiner 🏁😀
coolant once a year or every 16-24k? get serious. that is WAY overkill. my '12 has 61k on original coolant with nary an issue. I'll probably change it sometime this year (average of 10k/year).
Too much talking really.
"No more wasting your time," goes to ten second intro video and then a commercial, then a one minute product placement for fucking gloves! Gloves are for cold weather, guys. How can your fingertips and palms do their jobs when they are covered by gloves? How can they feel stuff?
No reason to get upset man. It’s a free video... your welcome.
Is it free? You made me pay for it with my attention on commercials. That's what commercials are: an exchange of my valuable time for an effort to warp my sentiments into buying something I didn't want and I don't need. I get you are trapped in the capitalist system by UA-cam and the US system. Don't make me a part of your sick cycle.
dude.... take a chill pill or 7.
HAHAHAHAHA. I took your time..? That you gave away so freely. I didn't force you to waste your time. You did that on your own. So who is trapped? As you continue to throw away your time. Both reading this and watching more and more videos and more and more commercials.
I can feel that you are a generally un-happy person. I am sorry about that.
Have a great day man!
Great video