Vespa sat in Barn for 10 years | Restoration
Вставка
- Опубліковано 26 вер 2024
- Holiday Season Deal! Go to nordvpn.com/ca... to get a 2-year plan plus 1 additional month with a huge discount!
Resuming a decade-long 'restoration' of my dream Vespa! I'm very excited for this project 😎
www.carlrogers.co
/ carlrogers
/ carlroge
Holiday Season Deal! Go to nordvpn.com/carlrogers to get a 2-year plan plus 1 additional month with a huge discount!
This is an absolute gem to cherish and NEVER sell. Just the name Vespa. You are going to spend the necessary time on it so take your time to buy until a beautiful result. Parts are readily available if needed.
Very interesting and recommended is alkylate fuel, it does not get bad in the tank, prevents problems with the carb, burns cleaner. Modern fuels often contain ethanol (nice in beer but not in fuel, it attracts moisture).
Please, caption in Portuguese (Brazilian).
Thank you.
My friend wanted to ask where the best or cheapest place to get beams is in north france, also where to ask for help installing x
I held my breath when you fired up that torch to soften the end of the fuel line connected to a full gas tank. 😲 💣 🔥 😅
Yeah, the Covid Cave could have become the Crispy Cave.
Invincibility of youth.
i don’t even see the comments, but when i saw that, 😳 immediately see the comments and yes the first i saw was this about the same thing, explosion in covid cave
The percock at the base of the fuel tank prevented fuel from moving down the line, it was perfectly safe.
@@matternest143 obviously this time everything was „safe“. But never ever underestimate fuel vapor especially in enclosed spaces like bottles or tanks. The smallest amount makes a „beautiful“ ball of fire.
I'm going on 76 years old woman from America and I love to watch your channel. It's wonderful to see you do all sorts of repair things and rebuilds. Men being Men. Almost a lost art in today's world. Thank you.
The "regulator" is your voltage regulator. The magneto in the engine provides a voltage which varies with RPM, generally higher than what you need for the electrics. The regulator takes the raw magneto output and provides a (relatively) stable voltage output.
The white grease in the old bearings was probably lithium grease. Not a BAD choice, but a bit of an overkill for the application. Since the scooter is exposed to the elements, you could try the grease used for wheel bearings on small boat trailers. This is generally formulated to maintain lubrication even if water makes it in. The first nut on the steering shaft is your bearing tension (Pre-Load). It should be snugged down JUST enough to eliminate play in the shaft. Too tight and you will wear out your bearings prematurely. The second nut is the lock (jam) nut to keep the first one from backing off.
WD-40 is NOT a lubricant. It is designed to carry a very light oil to penetrate and displace moisture (Water Displacement formula #40). It's great for breaking things free, FOLLOWED BY cleaning and application of the appropriate oil or grease.
As stated elsewhere, Ethanol is not your friend when it comes to older engines, as an excessive amount will deteriorate the rubber components in the fuel system. I'd try to avoid anything over E10. Mix ratio on the 2-stroke oil is critical, as this is the majority of your upper-end lubrication. Best to run a bit rich on the oil mix if you are not sure. Don't know when the UK made the switch to Low-Lead and No-Lead, but if it was after your scooter was built, then you are lacking the upper-end lubrication provided by the lead compounds in the gasoline. If "Marvel Mystery Oil" is available there, about 2 capfuls per gallon of fuel will help. Depending on the original octane requirements, you may need an octane booster as well...Lucas or "104+ are good.}
On the fuel, many years ago I had a 1972 BMW R60/5 which was purchased in Germany and sent back to the US when the original owner was discharged from the US Army. Thus, it was not the US import model, but the German model. This left me sitting on a bike designed for 100 Octane Leaded, with the best selection at a filling station being 92 Octane UNleaded. A local BMW group suggested the Marvel Mystery Oil and 104+. (100 Octane Leaded IS available in the US to this day...if you can figure out how to sneak the jerry can into the airport and hit the AVGas pumps).
I did the same with a VW Combi when I was 19. Honestly, I'd only just learned that you had to put oil in an engine, and didn't know which way you turned nuts to undo them! Pulled the engine, broke the crank case, replaced the big end bearings and piston rings and other stuff. It started first time and I drove it for many years. The bravery of the young!
wow now thats inspiration and a really cool story!
Oh my days... spent ages welding up an engine stand and now I'm in awe of your pallet stand simple and works!
100% not mechanically illiterate. Mechanics is about getting your hands dirty and giving it a go, the rest figures itself out eventually. You’ve certainly inspired me and thank you for that!
Hats off to you for making and posting a video of you doing something that you have very little idea about. I’m sincerely impressed by your courage to put yourself out there. We’ve all been there but don’t like to show it, yet you show it to the world! That’s unlike any other UA-camr I’ve seen and it’s kind of refreshing! Anyway good on ya, all the best
Excellent! As expected from you - very well edited, and terrific storytelling. Looking forward to seeing the next chapter of this resurrection. Well done!!!!
Just started watching your videos ,as a woodworker myself ,I have to say your skill level is exceptional for your age great work .
I lived in Madrid for a year as an exchange student in 1983-84. As a result, I’ve always had a soft spot in my heart for Vespas. As a 58 year old guy, I’d look a little silly riding one now so I’ll live vicariously through you. Nice work. I admire your ability to figure stuff out. Can’t wait to see the next installment.
You should do it! Do what you love, who cares what people think! People who matter don't mind, and people who mind don't matter.
@@rocolas Well said!
I worked on them for Years at a place called Scooterville in Anaheim California. My boss was wolf crow who his youngest daughter was Suzanne Crough of the partridge family got to go down and see them film it was always interesting. Remember always to carry a extra stoplight on those early bikes with no batteries if the stoplight element burned out when you put the brake the engine would stop because the power is being routed through brake light. It also let you know that your stoplight wasn’t working. I’ve always had a Vespa great scooter I currently have one now with ABS brakes and fuel injection I’ve gone modern but as you get older these helpful safety things are good because I am 70. I think that I would like to do a restoration on a two-stroke with the clutch cables and the interesting things were on the earlier scooters.
Legend!!! Had me a few Vespas at 16-18 in the mid-80’s and “Scooterville” was a coveted license frame. ‘71 P90 in Gumby green and a red P200E
Wow there isn't a lot to those things is there? And *YES* I did laugh when you dropped that steering bearing. hehehe
a guy with a Versatile tractor pic knows a thing or 2 about tearing equipment apart and fixing them???? asking for a friend ;)
So did I and I wonder how much editing he did to retrieve it.
@@jamesc7526 I spend more time fixing my John Deere equip. if I can get parts! The versatiles are still warrantee covered.
Well done Mr Rogers. I remember when I was 16 I rebuilt an SX200 Lamberetta. Oh what pleasure I had running it
I love the old Vespas. I had one as my first gas powered vehicle many years ago.
Great work! I would avoid using E10 petrol as the higher ethanol content can perish older fuel system plastics/rubbers. Looking forward to part 2
Should put unlead 98?
Also it gums up your carb if you dont use it in a while
@@clement6574 yes, some sort of premium, they tend to have less ethanol.
I think you are very brilliant at fixing and building your Home in France Congrats Carl
Love your videos - and a big reason for that is the fact that you're clearly talented and adept at fixing things but it's also that you show your process; mistakes, corrections, warts and all. Looking forward to part 2!
Great job reviving the Vespa and good luck with the spray. Hopefully with a tune and unleaded petrol that white exhaust smoke will be gone. Brought back fond memories of fixing cars and motor scooters with my Dad, although not so much fun at the time dropping screws and parts into the engine or watching them bounce into a shallow drain pit. In the early 80s through to the early 90s, I had to repair all my cars and bikes, except for major jobs. It was just beyond the budget to pay a mechanic at the time. I remember the old push start especially with a shitty old VW Passat across the old East German border exit from Berlin. Trying to drop the clutch while getting some stick from the border guards. My wasserpumpe ist kaputt in an Aussie accent. It's a bit of a lost art. Happy 2022 for tomorrow.
Carl... you are a gem. Hauling machinery around until you can give it the proper attention. The carb would have benefitted from an ultrasonic cleaning. The foot stand needs a spring.
damn right
Fantastic job buddy - there are a lot of people all over the world wishing you well with this project. From Australia - keep going! You're getting there!!!
Many a great mechanic learned by just buying a rig and fixing it up, learning along the way. Last June I bought an OBS 7.3l diesel after growing up working on outboard boat motors my entire life and only having driven a diesel one time. Having something you don't know about forces you to learn and network. Nice work and keep it up!
Great job! I wanted a Vespa when I was a teenager too. I love your videos. After watching your roof documentary I went back and watched all your videos. Your editing is amazing and I am so glad you decided to add voice commentary to your videos. Keep up the good work! Happy New Year to you and yours.
Excellent progress! I really miss riding and working on old Vespas. I once rebuilt a Vespa P200 motor for a friend at a campground during a scooter rally (she had holed her piston and I had all the parts and tools with me on my scooter). Looking forward to part 2! If you're ever looking for spares or need good advice, Alan up at BeedSpeed in Grimsby was my go-to guy over 30 years ago and he's still at it. Always did me right.
Great work, getting the electrical sorted prior to assembly was a good move! It's always a blast hearing an old bike fire up after sitting so long.
Good luck getting the old PK back on the road. Built and ridden many scooters, from my first 50 special when I was 16, through many Vespas and Lambrettas to my last PX200. Even though I ride a big 1300cc bike now I've never lost my love for scootering. Subbed because I can't wait to see the next episode. 👍
This reminds me of my first boyfriend Terry. We were too young to drive, or get a license to legally drive, but he could get one for a scooter. The fun we had!
Well done Carl, now you know how to do another thing. That's me at 16 with a Lambretta. 50 years later; an E-type but you learn the basics on a scooter as it's cheaper. Great video. Happy New Year.
Wow! You've just started your first mechanical adventure and without proper tools or manual; at least that's what I can see from your vid. For what it's worth, that's the way most folks get started with this sort of project. It's proof that a strong desire to get it running is more important than tools or a lack of knowledge. Way to go. Just make damn sure the brakes work!
Well done nice to know that others have very frustrating 48 hours. Currently having issues with a 4 stroke engine on a mulcher and with similar levels of mechanical ability it is rather frustrating. Makes me feel less incompetent when others suffer similar fates.
Carl - when is part II coming? Can't wait. And how is the House in France doing?
Way to go...... joyfully simple all analogue too. cheers Jerry
Hi! Great work, i have experience with 2stroke engines and I would go like this if I were you:
If it is difficult to start, there could be diferent problems:
Fuel problem:
1. Dirt carburator (Clean it, check the pilot jets and change all the gaskets)
2. Dirt in filter (put a new one)
Ignition problem:
3. Check the sparkplug (Put a new one)
4. Check the ignition point (mm before piston reaches the top)
Engine problems:
5. Clutch is slidding and can't transfer the energy from kickstartpedal to the crankshaft (Check the discs and change the oil (Special atention to the API normative of the oil, a wrong-modern oil can destroy the old clutches)
6. The piston and the rings have too much wear and its lacking of compresion. (Check the compresion with a tool, if it is bad check rings tolerance, check the tolerance piston-cylinder, and the cylinder wear, if it is too much you will need to bore it)
Hope it helps.
I had the same Vespa when I was 14 (1985). Brand New. Still running, I sold her to one of my father's employee when I was 16 and he is still using her everyday.
Great job! VESPA are used in Italy, in Barcelona people use the Honda SCOOPY mainly
Never rode a Vespa but I used to go fishing with my dad on his Lambretta,he had a couple, always remember my right leg would hurt from the vibration of the engine at the end of the journey,😳 great to see someone young doing something creative with their hands and not got a phone or game console in it,😁
Scooters are one of the best transports, but only in places where there is low and slow traffic. I would have a scooter or a Honda 70 any day if I was living on a small island or town/village. Have fond childhood memories of Piaggio and Vespas, such simple yet practical machines.
Great little project. Very enjoyable
Such an amazing channel, started watching during my break from uni. Now your videos play in the background while I work. Congrats on the sponsor as well!
Looking forward to update!
I absolutely love your video. there are NO vintage Vespa videos like this on youtube. I love the way you set did the video the issue, the fix, shown, the process shown, the narration, I love it.
I'd loto see a video on fixing and testing all the wiring connections on that harness on your workbench, before you install it, to get it all 100% working. That would be awesome!
I was 15 when I had a 50cc Honda step frame. I was thrilled.
That has to be the best ad plug in a video I ever saw!
im literally in the process of restoring 2 vintage vespas you can never get enough of these beauties
Люблю наблюдать, как ты работаешь. Ты имеешь отличные
знания техники.Спасибо за видео.
Cool! Make sure to pack the new bearings with grease on final assembly and not just lube around.
Looking forward to see more. 😄
He needs someone to show him how.
A vespa in a panda is one of the most Italian things ever... Love it!
Very cool Vespa! Love seeing someone who isn't mechanically experienced still breaking things down and struggling through to an awesome end.
Awesome! Must have been great to ride it around the parking lot for the very first time.
Really nice, well done.👍🏼
Even the neighbours most love hearing the sound of the engine running 😂😂😂
Well done for taking in such a project, this is how we gain knowledge and experience.
You did remarkably well . Well done.
Carl, for someone still very young compared to me you seem to have a very good hand and a good eye. I had my first scooter in 1970 (my best friend had a 150 Vespa) and am still fixing my son’s motorbikes 50 years later! Nice work young man, happy new year 🥳
I started watching you with your mom and dad (I think) in France a year ago restoring that beautiful farm. I had just been diagnosed with an "auto immune disorder" when I heard you mention that you had a disorder too!. I'm glad you are taking care of yourself when your illness flares up. My doctor told me to listen to my body and that my disease is related to Rheumatoid Arthritis. But instead of attacking my joints, my "disorder' attacks my skin and organs. My skin started getting tighter and my muscles hurt. I just thought it was my age! lol! Scleroderma was a word I never heard before, and I suddenly had it! Now I'm on anti-organ rejection drugs and feeling okay I guess. . Its been a strange couple years ! 😶🌫 🙄. Oh well! C’est la vie mon amie!! peace!
so cool dude! exited to see it finished
Go the Vespa! Great work and thanks for sharing. HNY too you and yours. 🎊🎉🥳🎆🎇🧨👍🏻🙏🏽🦘
I am so impressed with your knowledge of taking apart an engine. You are a very unique and talented individual.
Your doing better than some others would 👍👍
Nice work Carl! I had one of those back in the day (and I too was mechanically illiterate) The best way to learn is to take it all apart and put it all back together again. Can’t wait to see you ride it all the way back to south west France!😉
For someone that’s mechanically illiterate, you did a fantastic job brother. I’m looking forward to the next update, until then I’ll be watching from Panama City Florida, USA. 🇺🇸
The only way too learn is too do, it’s always satisfying to restore old stuff! Anyone can buy new. Old is better. Congratulations for keeping me entertained thanks, from St. Paul Minnesota.
What ever you are you son... You are amazing!
Ya did fine, that's how you learn!!!
Play safe from Elliot Lake, Ontario, Canada,
I can't wait to see how you incorporate a Vespa into milling some 300 year old oak beams or something!!
I came home from vacation and in the mail was my belt and coasters!!! Love it all. Thanks.
Woop!!
i cant avoid smiling every time i see a bike back to life. its gonna be a very satisfying proyect.
Im so jealous! Cant wait for the next one
Tip for the next time, the autostart spray is sprayed into the air inlet of the air filter, just before you try to start the engine or while you are trying to start it. Good work, keep it up.
That would be easier but in the spark plug hole works too, Also placing a little petrol in there would have worked too,
Awesome video! Cant wait for more progress on the bike!
Great job to get it back together 😁👌👏👏👏❤️
You are so knowledgeable about so much. I admire your ambition to work on your projects.
This is a very interesting video, for a personal reason. When I was 16, back in 1969, I did the same thing with a Vespa. This was one with a 125 cc engine, and it probably was from the beginning of the 60`ties. I stripped it down, took off the engine and spray painted it. Unfortunately, I picked the worst color, a metallic blue. That proved to be impossible to get a nice result with spray cans. But, more importantly, I managed to put it back together again. Everything you did with the handlebar and steering column does not ring any bells, so I probably did not disassemble that. But it ran for 3 years after the spray painting job, until the engine needed a new piston. That was beyong my capabililties, and I stopped using it. But I am still a bit proud of the problems I solved when I was working with the Vespa. Today, I cannot imagine doing anything similar. Sometimes, being young gives you more patience and stamina.
from Italy...thank you !
Good job Carl. I really wanted one of these as a kid. Would still love one now for popping down the shops.
Amazing work! I had the best times as a teen on my scooter something to recover, your video is filled with technical intrigues to set ones.
Happy new year! I used to have a Vespa, in north of Spain, green like an apple !! it was such a fun , ... the vespa was my big brother before of me, and our uncle before of my brother and my younger brother after me and .... many other in the family , is eternal, the most beautiful motobike ever!!! Cant wait to see the "new look " of this one. Love this project
Fuel and torch part was interesting !
Is there anything that you and your dad can’t make or fix? I am constantly amazed by your videos and I love everyone of them. I have binged watched and now I’m all caught up! Looking forward to the next one. Happy new year! Take care, stay safe.
You are a brilliant young man who has many talents your parents did a great job with you
Super job, enjoyed it very much.
Well done Carl...there is nothing wrong with your mechanical ability. I once restored a 1961 Suzuki MA50 Scooter and yes cable fitting can be a pain in the A£%#
Can't wait for next installment. Well done for overcoming the pitfalls of the Small frame. Especially as it has nowt to do with wood, which is where I have seen you excel. 👍
Fantastic, Vespa.
Great video as always !
Great job bro. I am the same and with a service manual from local library in Sydney I replaced my head gasket and water pump from my 1974 323 mazda.
I was also riding a Vespa in Spain when I was 16, but I was driving a car back in the states, so the following summer I got a Citroen. Lol.
Your family is vey patient
You are so brilliant and very smart . Your parents did well in rising you . Hope to see more videos of your work on the French Farm
Not bad for a newbie. Welcome to the club.
We need more Vespa Content!
I would love to have a pinch of your ability & drive.! I love watching you restore things, its the way the world needs to return to
The "Mystery wire" you pointed out in the beginning is for your brake light switch, which is missing off your footbrake. It mounts just to the left of where you attached the cable.
I thought that too looking at the vid, I've never stripped a PK but I'm gathering the brakes witch assembly is the same as P range T5 etc ?
@@kevinell6605 Pretty much. there was a reedy pin switch that was cobbled to the front brake after a while in other places, but all of the switches that i can remember were at the pedal, as there was no other place to put them..
I enjoy all your videos, especially the woodworking ones. Some minor points for you to consider on this little project. Split pins should be bent right back around the pin, not just splayed apart 45 degrees, and Easy Start will damage the piston if you use it habitually. Far better to work out why it doesn't start normally and fix that. Once is OK, as you did on the video.
Everyone starts somewhere. It’s the starting thats important 😀
Can't wait for part two
Good presentation Carl 🥂
there was a Chris Rogers from San Diego California who raced Vespa's and Lambretta's , you remind me of him - Unfortunately he died in a house fire in his 20's - you can look him up on Rogers West Coast Lambretta
Great video! Nice job restoring the Vespa!
5:56 LOL 😄
Good on you, Carl. Keep on learning "how to" stuff for your 2-wheeled ride. Successes of all kinds must be very satisfying! 🤗
Hopefully we will see the full resto video soon @carlrogers. I also have a vespa 90 project on the backburner.
he sold it