Mercedes A180 w176 Bypass / Blow off Valve - Replacemnt - Test P0299 P0035

Поділитися
Вставка
  • Опубліковано 12 гру 2024

КОМЕНТАРІ • 22

  • @doit_vehicles
    @doit_vehicles  2 роки тому

    W176 Turbo Wastegate : ua-cam.com/video/4SieELJTCBU/v-deo.html

  • @timothysoeltaansingh8212
    @timothysoeltaansingh8212 4 роки тому +5

    Does this work on the A180 diesel as well?

  • @HATARI777
    @HATARI777 2 місяці тому

    thank you very much for sharing !!! 👍✌

  • @JesusRincon-c7w
    @JesusRincon-c7w 2 місяці тому

    Can the partial crankcase Ventilation system cause the p0299 hose on the back of intake is vacuumed shut like if its pinched shut

  • @saitcanyucebas3768
    @saitcanyucebas3768 4 роки тому +2

    The OEM diverter valve recirculates the air to the intake. I wonder if the aftermarket valve works exactly the same. Or to make the "cuff" sound, does it release the air pressure to the atmosphere? If so, does it cause any problems, such as performance loss during acceleration?

  • @grupinfractionalorganizatp5003

    hi
    one question for you
    if you know how work that valve ( vent pipe on mercedes W176 A 000 016 00 30 )
    which are connected in aspiration turbine from engine carter

  • @pretty-deadly9237
    @pretty-deadly9237 5 місяців тому

    I have a 2019 cla 4-cylinder turbo I got the p0033 changed park plugs and the code came up

  • @tiagofsl4510
    @tiagofsl4510 3 місяці тому

    My error is P148E 22... 1.6 dci 2016... Related to this?

  • @garethjack6753
    @garethjack6753 3 роки тому

    Hi i need help on the negative clap cable.. there are 2 small wires but i have 1 blue/white ,1 Red and 1 brown/blue wire. which 2 do i use?

  • @Lovedrug96
    @Lovedrug96 Рік тому

    So you replaced the boost sensor I thought u said it’s working

  • @mayowaodus6310
    @mayowaodus6310 2 роки тому

    Is this called the waste gate solenoid A

  • @ahmadalmansour5710
    @ahmadalmansour5710 3 роки тому +1

    Hi I have problem with this p029921 The turbocharger 1 boost pressure is too low. The signal amplitude is below the minimum amplitude. You can help

    • @Richard-ps7ht
      @Richard-ps7ht 3 роки тому

      I aloso have the same problem. Did you fix yours? I have replaced the blow off valve but its still the same.

    • @cristianboggione8242
      @cristianboggione8242 3 роки тому

      I have same problem. I think the problem is turbo. Maybe it’s cracked

    • @ooozturk9195
      @ooozturk9195 3 роки тому +2

      Your turbos are probably not broken, most probably its the westgate issue. Westgate is loosing pressure. If you can find a westagate, you dont need to change the entire turbo. IF you can not find it, you need to change entire turbo. Mercedes dont sell it seperately

    • @elturco718
      @elturco718 2 роки тому +2

      @@ooozturk9195 write answer . You can buy from eBay, search for turbo nr.

  • @leothesamoyed62
    @leothesamoyed62 Рік тому

    Can P052E71 be related to this ?

    • @existenz0989
      @existenz0989 5 місяців тому

      No. For this failure you must replace A2700184600

  • @dabijamihail8869
    @dabijamihail8869 4 роки тому

    Keep it up bro 👍

  • @projectathos
    @projectathos Рік тому +1

    You didn't explain if this is working or not man?! What's the point of this video of no result is achieved?!

  • @hlynurthorvaldsson
    @hlynurthorvaldsson 3 роки тому

    *Thanks for