Вставка
- Опубліковано 7 чер 2024
- Checking out the handcrafted IBM PC 40th Anniversary Limited Edition from Miniatua! It's a highly detailed 𝟙:𝟙𝟘 scale model replica of the 1981 5150 computer system with 5151 MDA monitor and dual floppy drives. And it even has a working TFT screen showing videos of software! Absolutely lovely.
I purchased it here: www.miniatua.com/work/ibm5150...
00:00 Introduction/Overview of the Model
06:26 Unboxing It!
12:21 Awestruck Admiration
16:28 Testing the Display
27:22 Musical Compilation/Collage Video
Music at the end is 'Rising Sun' by DivKid
I don't get to see people reactions to my work very often, it was really fun to watch! I hope to make more accessible models in the future, without mass producing, keeping it hand made / hand assembled. Thank you for making this video, so much fun to see a proper unboxing of something I made, it made my day. : )
Wild idea: you could probably get former Sun or SGI employees to crowd-fund a limited run of miniatures of some of the iconic machines they made in the 90s.
Your work is absolutely amazing.
Side note: There’s a typo on your website on the Z10 section. It says “one of” instead of “one off”. You can see it at 2:07. Just a heads up.
@@JasonZakrajsek He also misspelled "one of fourty" on the certificate of authenticity.
Your work is amazing. Kudos.
It makes me happy that this made Clint so happy. You can just here the pure joy as he giggles and just something simple like inserting that floppy was great fun.
Amazing to think that this thing is leagues more powerful than the full sized pc it's modelled after.
Lol right?
LOL! It looks like it runs on an STM32F103 "blue pill" which is considerably more powerful than the IBM mainframes of the day, never mind the PC's.
Bloody good point!!!
I would have guessed they would make it about the same in performance too, way to go though may be, just run a similar operating system. Also, little nagging me, all this ingenuity kinda wasted on some really pointless thing. Luxury for ya i guess........................ I'll stop.
Mind blown.
Jeepers, at least two of those commissions were directly by IBM. (And with "trademarks of IBM, used with permission"! I can't imagine that was easy to get from such a huge company) Clearly he caught the right eyes with his early work. Really cool! Marvelous attention to detail.
I saw that too and was surprised! It's always way cooler when they CAN actually use the authentic logo from big companies like that!
Same here. Amazing that IBM would even speak to this crazy Canadian.
Imagine the boardroom conversation…
@@michaelcharach tons of companies are doing stuff like this now. Partnering with artists type deal.
I can't imagine it's actually that hard to get permission for logo use in an art piece. Doubt it would be free, probably gotta a pay a royalty for each piece made, but can't be much worse than that
He was commisioned by IBM to do a miniature mainframe, so I'm sure he's been cleared by them.
"Also, as tempting as it is: DO NOT TRY TO TOGGLE THE RED POWER SWITCH. IT WILL BREAK!"
LOL, I like how they knew it would be tempting!
Honestly, given how small the detail is anyway and how hard it would have been to mould/carve, I wonder if it wouldn't have been as almost as easy to find some actual mini-switch to stick in there - not electrically functional, but still a toggle.
The coolest part is that IBM authorized this amazing work of art!
Came here to comment the same. I’d never have thought they would!
I wish I knew about this miniature release, I would have loved to have one. My grandpa was on the team that developed the original 5100 at IBM, so the 5100, 5150, PC Jr, and other models were a huge part of my childhood and my first computers.
Cool story bro
John Titor is looking for this...
@@jarod3371 reading stein-something or other
I remember you talking in the past about how much you loved dolls houses and miniatures as a child, so this seems pretty much custom designed to squeeze money out of you. In a good way.
Pretty much! Can't resist this level of detail at this scale, especially for one of my all-time favorite bits of tech
Why is that a blerb? Imo deserves the honor of the main channel ❤️
I agree, this MUST go to the main channel.
This gives a whole new meaning to “micro computer”. 😍
Nanocomputer at this scale.
I love how even the box it came in looks like some new old stock you'd find in the depths of Computer Reset. That's so cool.
wait wait wait they didn't make it a fully functional mini 5150? damnit!
I dont know why miniaturization is fascinating to me, but I'm glad this exists lol
That’s a great point.
If that just had a static screen with an LED behind it it would have still been amazing and no one would have expected more. That it's fully animated is above and beyond mind blowing.
The only way this could be any more insane would be if the thing was running a full-blown emulator and had some PS/1 ports on the back to plug in genuine IBM peripherals.
@@Mainyehc
Buld one lol.just get a pi,build it in the block with same screen,with minture sitting on top lol.i would but I have no tools or have storage for them lol.
@@ghostbombl8034 A guy I work with is doing exactly this, albeit not to this detail.
@@SirFrag32 nice.sound cool.
That is... labour of love doesn't quite seem good enough somehow. That's simply amazing. What a piece of work and what better man to radiate enthusiasm for it.
This is so neat. Miniatures are magical. You should take a tilt shot pic of the real one to give it the micro look and compare it to the mini.
Craftsmanship is alive and well in 2022. Amazing piece and thanks for sharing it with us.
This video and the little masterpiece replica sits right at the intersection of so much that I love; old tech, miniatures, video editing and nostalgia. The closing collage with the retro synth soundtrack was such a nice touch.
I’m so happy you bought this, thought of you immediately when I saw he was offering this! I almost bought one myself, but you having and documenting this we can all appreciate the beauty of this machine!
Simply amazing! I actually used many of these original IBM PC’s and this craftsman has nailed it in every detail.
Thanks for sharing!
I'm so jealous. I actually started my IT career using 5150s back in 1981. The model captures the original so well.
Miniatures have ALWAYS been facinating to me, even as a kid. This made my day! What an incredible piece of art.
Ok now I want to see someone with a real 5150 slot a floppy into the drive with a giant pair of tweezers.
This was 30 minutes of pure delight :) glad you enjoyed it, and thanks for sharing it with all of us :)
That is so cool, Cant tell you just how happy seeing the unboxing and the detail of the tiny IBM. Beautiful Work!
This completely made me happy. This dedication to work and the awesome result, the way miniatures are so hard to craft and the unexplicable joy when I see one well made... this is gorgeous!
The attention to detail is amazing. An outstanding example of craftmanship without any question.
I'm a huge fan of miniatures, and this one looks incredible! Mad respect to the artist who put these together - it's a beauty.
Love the enthusiasm of your model. Models can be appreciated for a lifetime.
Extremely cool! What an amazing piece of art work... Well done! Congratulations Clint on getting this personalised special edition.
3:07 that cut was SMOOTH :O
This is very cool. Glad to see this piece of art displayed in a video for everyone to see.
Thank you for this delightful video. I've been having a really rough day but, watching this and hearing the delight in your voice has really helped me out.
This is just fantastic! The details are out of this world! Keep up the great work Miniatua and thanks for showing it Clint!
He's got all those details right! Amazing work. Even made sure that the LCD doesn't fill up the entire screen like a true IBM CRT from that era.
That's a really beautiful miniature that I would have never known existed, thanks for sharing with us!
Words cannot describe how much this video made me smile! Thank you Clint and Miniatua
I've been watching your videos for like 6 years now, and I think this one is up there as one of my favourites! This was fascinating!
This is unbelievably well done!
Very impressive. It surely is the best built miniature I have ever seen.
I was so bummed out today and this video, Clint's reaction, and this fantastic miniature is just totally turning my mood around!
The detail is astonishing, quite amazing. Thanks for sharing.
We appreciate you getting this gift for yourself and the gift of you sharing it with us!
That is so cool! and so dang detailed.
The macro shots in the video shows the tiny details and I find it fascinating that that much detail is possible in that tiny of an object. Also shows that focusing on that tiny screen was probably not easy and looked a bit overexposed when you first turned the screen on.
The fact that it actually has a working screen on it is just the icing on the cake! That is so cool!
Thanks for sharing this! Such a great thing to call your own.
Thanks for showing what’s on the card in such a slick way, always great presentation on these vids.
That it is so small and can seem so realistic is simply amazing.
This has to be one of the most awesome things I've seen in many a long year! The things you could do with this are endless. You maybe could get some appropriately-sized dolls (Barbie & Ken perhaps?) and have a great time putting them to work doing data entry, or playing games lol. This guy's work is just amazing...
Oh, and this does remind me of a miniature of sorts that IBM themselves produced - it was a paperclip holder in the shape of a PS/2 Model 25 if memory serves. Nowhere near as detailed as this of course, but it was a fun little thing I wish I'd nabbed before leaving my job at the IBM dealership.
Barbie dolls are 1:6 scale, so this would be too small, unfortunatelly.
Very glad that you picked up one of these, because I’m sure it has, and will continue to, give you a genuine smile. Good work Clint, keep on keeping on.
That is really cool. Amazing work!
This is a really cool piece, a lot of work went into it that really shows, a lot of the time a scale model of something usually looks like a half-arsed injection-moulded toy with a bit of paint haphazardly spread over it, but this, it's just beautiful!!! :D
That is a work of art. Definitely worth every cent.
I love the music video like segments and things showing up here. Lovely touch that speaks to me. Great stuff!
Clint, i'm inlove. Amazing detail and qualiy. Loved it
That is incredible! I must admit, I'd be fanboying dramatically.
It's way way out of my price bracket, but I'm so happy that this sort of thing exists.
Person from the 80s: Oh sure, computers will become smaller in the future.
- Computers from the future be like:
For real that's awesome!
That thing is so cool, and I love hearing how excited you are about it
I remember having a 5150. Good times, a long, long, long time ago. This looks beautiful. He did some amazing work with it. Congrats.
I'm a lapidary by profession and I'm amazed at the quality of execution, it's watchmaking skills right here.
👌
That's so cool! It would be extra awesome if one of the floppies was the Micro SD slot, they look about the same size, but of course that would be quite hard to pull off.
Would be cool if the keyboard worked.
Amazing piece! props to the artist, just great work.
That is truly one of the best things ive seen, that is exquisite & it actually boots with little tiny screen to, thats just gon right to the top of my want one list
After years of LGR videos, I think we have finally achieved maximum nerd with this one! Great video Clint!
Haha brilliant video. I can't get over you putting the little disk into the machine action from different angles with tweezers. It somehow reminds me of Synecdoche, New York. Charlie Kaufman seems to have a thing for characters' little model making obsessions. Very fun. Thanks Clint.
Awesome… watching it just kept tricking my eyes into thinking I was looking at the real size machine. Amazing attention to detail, and what a bonus that the screen works 👏🏻
That is the coolest thing I have ever seen bro! So cool! Thank you for sharing!
This is art. I expected it to just show the IBM logo but omg that was so cool.
I watched another video about normal sized computers immediately after watching this one and there was definitely a moment of congnitive dissonance as I tried to figure out whether the guy in that video just had incredibly tiny hands or what the hell was going on. Nice job, Nicolas and Clint! You gave me a glimpse of the art!
Literally one of the top coolest mind blowing things I have ever seen. This is amazing work. Gorgeous.
That is indeed gorgeous. Wow! Did not expect there to be electronics in there. So much talent!
Hey LGR, I just wanted to tell you that your videos "spark joy" (to borrow a phrase). Watching you totally geek out over stuff like this is really fun, and a nice way to spend a chill half-hour on YT. Thank you for sharing it with us. Also, how satisfying is it to use tweezers to insert and then click in a micro SD card, amiright? Cheers!
wonderful device clint :D nice video
era de esperar que un caballero como usted viera LGR tambien B)
se espera el video de gaming con el pc master race que llevaria windows vista
con gusto, saludos
Always great to hear such joy
I love working miniature stuff... and this is by far one of the coolest things I have seen!
I just noticed the keyboard actually has a legend on it, that certainly couldn't have been easy!
Amazing work in crafting this. Thanks for sharing it - as birthday presents to yourself go, you definitely chose well! If he ever makes a 5170 replica I'd get one.
Hi Clint,
Wow, another great video.
Thanks for sharing.
I also like the detail put into the screen scrolling, with the dimming of the phosphor and the screen tear.
That is absolutely a magnificent model! :D I appreciate the detail right down to the wider spacing of the expansion slots, and I absolutely love the fact that the disk can slide in! _And_ I couldn't get the grin off my face as it showed Zork. :D My face aches now. The grille on the top of the monitor... It's probably a good thing the keyboard was never in focus or I would have died of a broken heart. :P I threw one out in the late 90s. Wasn't a good decade.
But anyway, it's given me an idea: a working scale model of a mainframe using emulator software. If the original had a console, perhaps the model could have a miniature screen which echos the text sent to a full-size terminal. The piece de resistance for me would be the emulator spinning the tape spools as tape commands were used. :)
Wow, this is incredible! The 5150 was the first computer in my family, eventually it was replaced with a PS/2.
Nice touch with the Beer at the end ;) Thank you, this is a neat little display piece :) Old-Sk00l 1337 Cheerz!
What a beautiful peace of work, the amazing attention to detail so glad you shared this with us, Thank you.
5150 first thing came up in my mind was 5150 guitar amp, EVH 5150 AMP.
IBM 5150 PC,kind of cool model name.
And now we know why it was $600. CLEARLY worth it :)
Closer to $440 USD, but yep. Worth it for the craftsmanship!
I love this. Lgr could copyright his awesome footage for movies with how ambiguously technical the little thing looks. Thanks so much LGR! This was awesome! 👌
Clint's enthusiasm for computers and related stuff is truly contagious, always fun to watch!
This is awesome!! I love miniatures, especially ones this detailed and well done. Great video as always and I'm glad you were able to get one!!
Edit: If you keep messing with your floppy like that you'll go blind, lol!! 😁
Amazing! I think the price is incredibly cheap for the effort and design that went into it. I honestly think he could have charged double that and still sold out in no time. What an incredible piece of art.
This is sooo damn amazing, the attention to detail is just mind boggling!
This is amazing piece of art, you deserve your like!
It is an amazing piece of art, and I think that it has a processor that is thousands of times faster than the original computer. And a lot more memory too.
Taking the meaning of micro computers to an entirely new level.
This is adorable!
A genuinely excellent model.
I'm liking the new videos with the slow transitions and synth background music. I actually thought it was your music before I read the discription.
This is so awesome! I love it. I wish the power toggle were in the on position if I'm nitpicking, but otherwise stonking! Potential hack would be to have a tag reader in the floppy drive and depending which floppy is inserted (with tag) it could load a different video relating to whatever software that floppy contained
That'd be an amazing addition
There’s going to be a lot of cool hacks for these if the screen wiring can be accessed inside the box. #WirelessEmulators
This is amazing. If he ever makes a IBM PS/1 I will pay whatever he wants for it.
The craftsmanship on this is incredible!
Very cool stuff! Thanks for sharing!
You should film it rotating against a green screen and recreate your LGR opening animation ... but for real at 1/10 scale. :)
OMG what a great idea!
Oh my... What a production! Suddenly CAD$559 doesn't seem so crazy. The only thing more he could've done is replicate the old IBM binder manuals!
Edit: It's Zork!
You are standing in an open field west of a white house... SQUIRRELS!!!!! It took a bit to be able to read it, but when I could, HOLY CRAP.
it is lovely to see you so happy