Drivers I recommend if you have to cut the air hose to buy the other air gun the one with push connect fittings. I bought this one and had to cut the hose because the factory fitting wouldn’t come off. I couldn’t get the brass fitting to go one correctly so I bought the push to connect gun, went on 2 seconds no leaks as of yet that was 2 weeks ago
I connected mine to the wrong hose, now when I use it it releases the air from my chair 🤦🏽♂️ I do see a black hose that I over looked however it’s one hose and then it runs into multiple hoses where you would adjust the pressure in the lumbar and etc. is that the hose it’s supposed to be connected to?
Do you have to let the air out of the tanks to be able to disconnect the air lines? I have my truck running and can’t get the quick disconnect to come apart. I’m assuming it’s the air pressure flowing through the line preventing me from disconnecting. Is that the reason and is the answer to just do a brake fan down to get the air out so I can install the new adapter? Thanks
Thank you !! I bought my kit from loves cuz I needed it and I had to cut the hose out the old connector bc they wouldn’t come out and installed the new connectors but it was leaking so bad and it was obnoxious so I put more tape on the end pieces of the new connectors and it worked ! ♥️♥️
Guys, you CAN'T stop all leaking... They ALL leak, unlike in the OLD DAYS... What I did was bought a pair of needle nose grip pliers and used it to clamp off the intake line to the left of the coupling, where both sides of the airline sticks into. It still leaks just a little bit, but it only affects me when the truck sits overnight, and it empty out my air tanks. I can still hold air in my seat this way, and just remove the grip pliers whenever I need to use the air gun 🤷🏾♂️👍🏿
Drivers I recommend if you have to cut the air hose to buy the other air gun the one with push connect fittings. I bought this one and had to cut the hose because the factory fitting wouldn’t come off. I couldn’t get the brass fitting to go one correctly so I bought the push to connect gun, went on 2 seconds no leaks as of yet that was 2 weeks ago
I’m not sure why I was so worried to do this. The video helped a lot man thank you.
Only issue with these if you overstretch the hose it might pop out the spray nozzle
Good job. Thanks!
How do you turn the air off? 1 of the hoses going into the t connector keeps popping off
I connected mine to the wrong hose, now when I use it it releases the air from my chair 🤦🏽♂️ I do see a black hose that I over looked however it’s one hose and then it runs into multiple hoses where you would adjust the pressure in the lumbar and etc. is that the hose it’s supposed to be connected to?
Do you have to let the air out of the tanks to be able to disconnect the air lines? I have my truck running and can’t get the quick disconnect to come apart. I’m assuming it’s the air pressure flowing through the line preventing me from disconnecting. Is that the reason and is the answer to just do a brake fan down to get the air out so I can install the new adapter? Thanks
Thank you !! I bought my kit from loves cuz I needed it and I had to cut the hose out the old connector bc they wouldn’t come out and installed the new connectors but it was leaking so bad and it was obnoxious so I put more tape on the end pieces of the new connectors and it worked ! ♥️♥️
What was the airline connected to previously?
God bless you
Yeah that ain’t it my man 😂
Guys, you CAN'T stop all leaking...
They ALL leak, unlike in the OLD DAYS...
What I did was bought a pair of needle nose grip pliers and used it to clamp off the intake line to the left of the coupling, where both sides of the airline sticks into.
It still leaks just a little bit, but it only affects me when the truck sits overnight, and it empty out my air tanks.
I can still hold air in my seat this way, and just remove the grip pliers whenever I need to use the air gun 🤷🏾♂️👍🏿