You can tell thar chain is under serious tension, by the way Yuri is hiding behind the upright. He doesnt act that way pulling the front rails of a car. Haha. He's gonna go deaf with that big F'n hammer work though! It doesnt seem as loud when you're swinging the hammer, but it is. You should do an experiment and put your head in the same place while Nate whacks the frame. It'll seem waaay louder! Awesome job as always. Yuri has the upbeat comfortable talking to the audience on point.
The Knowledge in Yuri's head about how to reshape these frames back into place is Mind-blowing and very interesting But Does that Bring him to the level of Corn Pop.. Corn Pop was a Bad Dude. 🤣🤣
Laughed loudly with the little clips set after the chain broke.Serious side;I'm glad you wrapped the chain.You usually only get killed Once.Darn good job of straightening that area.
Yuri and Nate helping out a friend again, you're good people for sure. How you can straighten up these spaghetti jobs Yuri is beyond me, its's all skill and expierence. Those chains got my attention twice, be safe, Peace.
I worked for Kansas Jack many years ago (Lived in Mcpherson), delivered and set up hundreds of machines all over the country. It's amazing what a skilled tech can do with a totaled vehicle.
Measuring to the ball joint stud is more accurate. That way you don't have to think if the wheels are perfectly straight. I've done that exact repair many times. Good job guys
You are saving a nice truck from going to the salvage yard. Watching the process is always fun. Have a blessed day guys and thanks for the video. Cheers
Yuri and Nate are putting in the work. Love how much content you guys put out there for us. I just finished watching Motörhead. Waiting for vTuned now. Keep up the good work
Yuri, great talent but dangerous work, be so careful where your put your head as you are the personality type that just gets stuck in but that can put yourself at risk
“I want the Austin” Since watching all your videos I now realise how important it is to check for alignment,shut lines & panel gaps . Thanks Yuri top man.
Hi from uk guys👋👍 great job saving that chassis leg not a easy pull but you nailed it 👍and your chain 🕵 great to see the safety net was in place tho cos the pull pressure on that was immense as the ram was pumping really really slow but great goin guys some skills again 👍 thanks for your time be safe and see you soon👍👋 still sending thoughts and prayers guys 💙💓🙏🙏🙏💓💙
Awesome channel guys love the videos. I like the way y'all pay close attention to details and get it fixed right. I was thinking perhaps y'all's channel Motorhead and V-tune could do a joint effort video on freshening up tow truck kind of pimp your ride style hahaha God bless guys
Very wise using the shop quilt on the chains; I have always thought that should be done. Does using the quilt make it 100% safer probably not but it does get it way closer. You also did pretty darn good freaky job on pulling on that frame, because that's some hefty metal. Keep Orange Crushing It!
Great video, you guys are killing it.one thing when you weld a pull plate on the frame isn’t it better to weld it solid than tack welding,just curious.all your siblings are a god send for your dad in working in the family business,so that’s why you have so many siblings lol 👍👍👍😎😎😎
I said this before, its not a glamorous job sorting out things like this. Normally its hot (or cold depending on weather) because workshops are generally hugely affected by weather, its dirty, it takes sweat muscle and brains to do a good job. Go and work for a day with Yuri those of you who think I am telling a story !
Really great work, and talent. However, you guys should be very mindful of the dangers of the workplace. Many opportunities for eye protection in that video alone. Losing an eye is something you will forever regret, and it doesn't take much. A 75 cent pair of safety glasses is all that could determine keeping your eyes or losing them.
Good job on the f-150. Nice when you can do a job for people you know and get it done and not change out frame like the insurance Co. Would like. 0 to - .5 degrees camber and 2 to 3 degrees + caster is good all day long. Keep up the good work .
fantastic content love the way you show how you use the frame clamping vehicle down to a two way pull one of the better videos ive seen you produce upwards and onwards to greater content *****
This frame machine looks like it take a lifetime to master seeing this i feel sorry for the Goonzquad boy's when they get there's. I hope you'll help them out before they lose an eye or skull 💀 trying to fix one of their rebuilds.
Amazing work. I have a 2015 that was repaired from an accident and having issues due to a bent right side frame. It was straightened out but I guess it still needs to be pulled more because I’m having camber issues. The tire sits inwards on top and out on the bottom. I have camber bolts on the bottom but they are already at max. Does anyone know if I could do anything to the top to move it out a bit ? Was even thinking of making a bigger whole there the bolts attach to make it extend out a bit.
Hey dude, picked up a hot mama at the bar this weekend . She was a big mama just they way I liked em. I was giving her the ole french tickler and her knees popped clean through the aluminum bed.. do ya think I could bondo it maybe? There’s also a really nice but print in the box side to, but I think I will keep it for the memory. Maybe I need to hire ya to build one them big flat beds on her. Maybe with a power tailgate and a cherry picker for the kinky stuff. If you know any single honeys 400 to 475lb hook me up dude!
@@23RD Oh perfect. That's not bad at all. Thank you so much and that was one heck of a job that you guys did lol I watched the video saying "wowww" alot lol. Great stuff! 👍🏿
Pretty surgical with those hammers.
You can tell thar chain is under serious tension, by the way Yuri is hiding behind the upright. He doesnt act that way pulling the front rails of a car. Haha.
He's gonna go deaf with that big F'n hammer work though! It doesnt seem as loud when you're swinging the hammer, but it is. You should do an experiment and put your head in the same place while Nate whacks the frame. It'll seem waaay louder!
Awesome job as always. Yuri has the upbeat comfortable talking to the audience on point.
The Knowledge in Yuri's head about how to reshape these frames back into place is Mind-blowing and very interesting But Does that Bring him to the level of Corn Pop.. Corn Pop was a Bad Dude. 🤣🤣
Soooooo happy to see you guys covered the chain with a blanket👍
Wow there is some pressure on that frame machine
Chains were trying to fight back , glad you guys are safe!
security blanket ;)
"Man with a plan.." Most DEFINITELY. I've never seen a close up of a chain break, so that was terrifying. Frame Magic is next level here.👍
Laughed loudly with the little clips set after the chain broke.Serious side;I'm glad you wrapped the chain.You usually only get killed Once.Darn good job of straightening that area.
Yuri and Nate helping out a friend again, you're good people for sure. How you can straighten up these spaghetti jobs Yuri is beyond me, its's all skill and expierence. Those chains got my attention twice, be safe, Peace.
Enjoy it ? Ofcourse it is framework!!! I like to see framework like this and the results are great !!!
This is real car rebuilding . Good job
Great work lads. Front end took a good slap!
Yuri saving a Ford. Classic. Paul's Porsche Parked Pecariously upon the Precipece of the Pickup chilling in the background was hilarious.
Nice job, hell of a pull, you boys know to get er done..
I worked for Kansas Jack many years ago (Lived in Mcpherson), delivered and set up hundreds of machines all over the country. It's amazing what a skilled tech can do with a totaled vehicle.
Measuring to the ball joint stud is more accurate. That way you don't have to think if the wheels are perfectly straight. I've done that exact repair many times. Good job guys
Very nice work! Most shops would have walked away from this one.
Yuri the smash repair King , keep up the great work ,
Nate and Yuri are the 💣!
Great job Yuri as usual 👌👌👌
You are saving a nice truck from going to the salvage yard. Watching the process is always fun. Have a blessed day guys and thanks for the video. Cheers
Very interesting! Thanks for the video.
Bravo!
Nice 1 yuri mice 1 nate, that's very sketchy when the chain breaks
Lot of skill. 👍
Bruh I’m high AF laughing at when the chain snapped “eeeeeeeeeeeyoooooooowwwwn” 😂😂
The editing on this channel is outstanding!
Made it look easy Yuri! You are a master at making what you have work!
Geez. Great job!!!
And yet again i'm very impressed by this frame job. 💪🏻
Amazing skills bro, that’s was definitely the hardest pull so far
Yuri and Nate are putting in the work. Love how much content you guys put out there for us. I just finished watching Motörhead. Waiting for vTuned now. Keep up the good work
Yuri is the man for this kind of job well done god bless you
Yuri, great talent but dangerous work, be so careful where your put your head as you are the personality type that just gets stuck in but that can put yourself at risk
Yuri l know you can fix it. From Jamaica
Dam mate that was a hard pull nice work,
What a great job you two, was a bit scary with the chain snapping but really good to watch and you still love that big hammer, what a team
I have total confidence that you will fix this truck, your the man Yuri,, I can't exclude nate he's definitely coming along well im happy for him!!
“I want the Austin” Since watching all your videos I now realise how important it is to check for alignment,shut lines & panel gaps . Thanks Yuri top man.
Nice job 🇺🇸
👍👍👍
I'm trying to go to sleep and you guys keep uploading! 👍
Hi from uk guys👋👍 great job saving that chassis leg not a easy pull but you nailed it 👍and your chain 🕵 great to see the safety net was in place tho cos the pull pressure on that was immense as the ram was pumping really really slow but great goin guys some skills again 👍 thanks for your time be safe and see you soon👍👋 still sending thoughts and prayers guys 💙💓🙏🙏🙏💓💙
Another great video Sir
Lets go 23rd garage im finished watching motorhead...
You guys are killing it with the videos doing a great job
yo great stuff thanks
Great video!
You guys should consider a measuring system (not a tram gauge).
Awesome channel guys love the videos. I like the way y'all pay close attention to details and get it fixed right. I was thinking perhaps y'all's channel Motorhead and V-tune could do a joint effort video on freshening up tow truck kind of pimp your ride style hahaha God bless guys
We will definitely do that soon
Kwaailappies!!! Excellent job.👌🏻
14:58 2 new pairs of underwear needed. Glad you were there instead of beside the door like in the previous clip.
tnx for the video
Love the work yuri. I always love watching your episodes you and nate do an awesome job
Yuri...please...please...be very careful when you are trying to a part you are working...i saw what happened there...
🔥
Very wise using the shop quilt on the chains; I have always thought that should be done. Does using the quilt make it 100% safer probably not but it does get it way closer. You also did pretty darn good freaky job on pulling on that frame, because that's some hefty metal. Keep Orange Crushing It!
We here !
Great video, you guys are killing it.one thing when you weld a pull plate on the frame isn’t it better to weld it solid than tack welding,just curious.all your siblings are a god send for your dad in working in the family business,so that’s why you have so many siblings lol 👍👍👍😎😎😎
You could not pay me enough money to get under a chained truck swinging a lump hammer...this could give me nightmares :-)
I said this before, its not a glamorous job sorting out things like this. Normally its hot (or cold depending on weather) because workshops are generally hugely affected by weather, its dirty, it takes sweat muscle and brains to do a good job. Go and work for a day with Yuri those of you who think I am telling a story !
Kool men
Not easy. That second pop got me. Stay safe and be well Slava Ukraini..🇺🇦 🇺🇦 🇺🇦
Really great work, and talent. However, you guys should be very mindful of the dangers of the workplace. Many opportunities for eye protection in that video alone. Losing an eye is something you will forever regret, and it doesn't take much. A 75 cent pair of safety glasses is all that could determine keeping your eyes or losing them.
Good job on the f-150. Nice when you can do a job for people you know and get it done and not change out frame like the insurance Co. Would like. 0 to - .5 degrees camber and 2 to 3 degrees + caster is good all day long. Keep up the good work .
fantastic content love the way you show how you use the frame clamping vehicle down to a two way pull one of the better videos ive seen you produce upwards and onwards to greater content *****
Who’s King of the frame machine? Yuri or Ben?
This frame machine looks like it take a lifetime to master seeing this i feel sorry for the Goonzquad boy's when they get there's. I hope you'll help them out before they lose an eye or skull 💀 trying to fix one of their rebuilds.
That's a gravy job with biscuit wheels 😂
Notification squad in the house 🏡
awesome work!
Excellent video
Great job.
Where you guys located I have the same truck the same hit I can't find someone fix it like this
How much for that ford f150? I'm looking for one like this
It’s not for sale, it’s for a client.
Great video! Working on a 19 f-150 with the exact frame damage. Wondering where you got the hook that you inserted into the frame from?
Thank you, I made that hook myself.
Would you consider making another to sell?
8:22
How much did this repair cost? Thanks
Amazing work. I have a 2015 that was repaired from an accident and having issues due to a bent right side frame. It was straightened out but I guess it still needs to be pulled more because I’m having camber issues. The tire sits inwards on top and out on the bottom. I have camber bolts on the bottom but they are already at max. Does anyone know if I could do anything to the top to move it out a bit ? Was even thinking of making a bigger whole there the bolts attach to make it extend out a bit.
Is there anyway I could bring my BMW do you guys have a 2008 328i e92 just needs a bumper front fender and Hood
Hit me up on Instagram
Interesting process but I'd just want the insurance company to write it off.
It was written off then sold at auction, new owner saved about 30% off retail.
Hey dude, picked up a hot mama at the bar this weekend . She was a big mama just they way I liked em. I was giving her the ole french tickler and her knees popped clean through the aluminum bed.. do ya think I could bondo it maybe? There’s also a really nice but print in the box side to, but I think I will keep it for the memory. Maybe I need to hire ya to build one them big flat beds on her. Maybe with a power tailgate and a cherry picker for the kinky stuff. If you know any single honeys 400 to 475lb hook me up dude!
😂
Hit an island in my f150 this weekend 😢
Hi where are you located
Comment
Ditto
U shouldn't but I bet u did lmao if there's a diamond junk it
First!!!
Sorry, but nope 😂
@@rickcar94 not today! But tomorrow for sure. Haha .
I'm curious at how much this cost to get done.
The bill on this job was 1500
@@23RD that's not bad.
Roughly how much does this cost because I bought a 2016 Ford F150 and it literally has the identical damage
I would say 1500-2000
@@23RD Oh perfect. That's not bad at all. Thank you so much and that was one heck of a job that you guys did lol I watched the video saying "wowww" alot lol. Great stuff! 👍🏿
nice to see videos where people actually do something commercially viable vs just talk shit and mind stupidity for clicks
Guys, I need a help with my frame , mine is not this bad but it needs to be pulled forward like 1 inch, please help me out
Section the frame or buy a new one