Stuck float/needle valve will cause the crankcase to fill with fuel. Take apart the carburetor and make sure the float is not full of fuel and can still float. Clean the needle and seat to ensure it still seals well. Then put together and see if it works. Sometimes you need to make small adjustments to the bowl to stop the fuel in time. But cleaning and ensuring the float still floats… should get it most of the time.
Yup, stuck float or needle, or needle doesn't seat properly. The hose ports on the carb are most likely vacuum ports that would allow tuning the carb based on the amount of vacuum the engine is creating in the intake. I don't know much about them, but somebody probably does. I think throwing the carb in the ultrasonic cleaner (after having removed as many of the rubber parts as possible) and checking the needle and seat will get you 90% of the way there.
Yaba Daba dooo..... Ants Pants Rocks..... 🪨 Is there a belt drive and variator behind the cover... Might need new belt and heavy weights .... Maybe check valve clearance.... I love these channels.... Make her ding boy make her sing 👏👏🤣🤣🤣
Great mid week video, nice cheap barn find. If the fuel is emptying into the crank case, then the carb float is either stuck, got crud stuck in it, get the carb off, strip it down, give it a good clean,make sure the float shuts off properly when your rebuilding it, try it again. 😊
Hey I really love your old iron equipment I grew up running 1950s era equipment dozens trackhoes loaders and even an old drag line to bad we live so far away I know we would be able to make a great video for you that would go viral !
Oh Lord. Now you can put that Porsche motor on it! Your sister will not mind😂 By the way, how did your sister buy that car? In America they cost as much as a house. Haha
Карбюратор заливает из-за краника на баке это не правильный кран нужен с вакумным выключателем как на китайском скутере и шланг от пластикового переходника идёт к крану чтоб при вакууме открывался кран когда заведён и закрыт когда заглушен двигатель
Hi can you please do more new show for all of us please we will be waiting for you ok I will always praying 🙏 for you 🙏 and your. Mom and your family and friends ok 🙏 please be careful out there ok 🙏 and please 🙏 be safe 🙏 ok I really do love your show when you have Ideas 💡 ok you have a wonderful day and have a good night and day ok love Lorilee xoxoxoxox
Bonus video, yay!! I know it will be more often a midweek video, but still feels like bonus to me.🤣
Not every week but still i try
Amazing find.
Hello from one hatched in Fort Gary, Winnipeg, Manitoba, Canada in 1952.
October 8th, 2024
The motor sounds like something from SpongeBob Squarepants when trying to start it. Lol
Towing was awesome. It reminded me so much of farm life. If it worked and did not kill you, then it was OK. Another different and fun video.
At least it was a nice day, now it's cold and nonstopp rain 😪
Stuck float/needle valve will cause the crankcase to fill with fuel. Take apart the carburetor and make sure the float is not full of fuel and can still float. Clean the needle and seat to ensure it still seals well. Then put together and see if it works. Sometimes you need to make small adjustments to the bowl to stop the fuel in time. But cleaning and ensuring the float still floats… should get it most of the time.
Sure when i dig myself out of all that dirt im in right now 😜
@@Ants_Pants dirt do need a diggin! Diggy diggy hole is the way of the mole. Lol
Yup, stuck float or needle, or needle doesn't seat properly. The hose ports on the carb are most likely vacuum ports that would allow tuning the carb based on the amount of vacuum the engine is creating in the intake. I don't know much about them, but somebody probably does. I think throwing the carb in the ultrasonic cleaner (after having removed as many of the rubber parts as possible) and checking the needle and seat will get you 90% of the way there.
That looks like it'd be a ton of fun.
Yaba Daba dooo..... Ants Pants Rocks..... 🪨
Is there a belt drive and variator behind the cover... Might need new belt and heavy weights .... Maybe check valve clearance.... I love these channels.... Make her ding boy make her sing 👏👏🤣🤣🤣
Great mid week video, nice cheap barn find.
If the fuel is emptying into the crank case, then the carb float is either stuck, got crud stuck in it, get the carb off, strip it down, give it a good clean,make sure the float shuts off properly when your rebuilding it, try it again. 😊
I follow 'rather B welding' a young American dude that makes those things. Very interesting stuff.
Nice find! kids will like it!
Hey I really love your old iron equipment I grew up running 1950s era equipment dozens trackhoes loaders and even an old drag line to bad we live so far away I know we would be able to make a great video for you that would go viral !
Yes perfect timing 👍👍
Getting ready for next years mud run I see...
That looks like fun.
Matt from diesel creek uploaded a honda UTV bought from auction.
You did the same... 😂😂
Good job👍👍 Are you planning to own a new heavy equipment?🤔 What is gonna be? Excavator ? Loader ? dump truck ? Or trailer ?
Me parece que esta com a boia do carburador travada , e a roda dianteira direita ta travada também
Oh Lord. Now you can put that Porsche motor on it! Your sister will not mind😂 By the way, how did your sister buy that car? In America they cost as much as a house. Haha
Hahah
She pays 900 eur per month for it. Ita not her its a rental
Sup Ants !
It better be a little bitty tiny trailer😅😂
Definitely needs a carb rebuild or at least cleaning and the correct vacuum hoses for that carb. Fuel delivery issues.
Oh lord. Here we go!😂😂
Oh no 😂
Hi buddy
Hey
Carburetor float is stuck!
We would call it in eagle units....yard cart
You can clean a carburator in like 5mins, dont be lazy. :D
👍👍👍
The carb is dumping fuel into the engine stuck float or needle valve is shot …
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
❤❤❤❤🎉🎉🎉🎉
Need to fix the needle and seat
Cooooooooooooooooooooooooooooool ,
25:40 🤣🤣
So you’re found a new lawnmower for supper Mum 👩
Yippee 🎉🎉🎉
Карбюратор заливает из-за краника на баке это не правильный кран нужен с вакумным выключателем как на китайском скутере и шланг от пластикового переходника идёт к крану чтоб при вакууме открывался кран когда заведён и закрыт когда заглушен двигатель
Your front brake calipers are on the wrong side. The bleeder should be on top.
Hi can you please do more new show for all of us please we will be waiting for you ok I will always praying 🙏 for you 🙏 and your. Mom and your family and friends ok 🙏 please be careful out there ok 🙏 and please 🙏 be safe 🙏 ok I really do love your show when you have Ideas 💡 ok you have a wonderful day and have a good night and day ok love Lorilee xoxoxoxox
Pływak w gażniku się nie domyka lub jest dziurawy dlatego leci paliwo do silnika i nie chodzi jak powinien
First lol
3rd i think
Your right had to refresh close though ✌️