It takes a little practice, but if you lay the cord down on a flat surface and, using a sharp _knife_ ( *not* scissors), cut *diagonally* instead of straight across the cord, it’s possible to get a much more pointed end when you melt it. Also, you have to be very careful when you go to melt it because the pointed end wants to melt first, basically destroying the point you’re trying to get. It helps to begin melting a little bit below/behind the cut, then move your flame toward the end. It’s not a perfect solution and I’ve had days where the cord just doesn’t want to cooperate, but it works beautifully when you get it right. However, TBH, it’s just easier and way less time consuming to use a lacing needle.
Guys, no crimp tool needed.. just melt the end until it's somewhat hard about a 1/4 or so. Then use fine scissors or a razor blade and cut diagonally, much easier than trying to shape it or laying it on a surface and all that.. just burn a bit the end not too much. Than just cut the point u want..
You Can Wear Rubber Fingertip Covers To Protect From Burns!! Kind of Like The Rubber Tips Bankers Use Counting Money!! But Check Out The Tips Here In The Comments Section!!
Cool! I've been looking for some kind of paracord pendant design for a while now. Thanks again. I wonder if it's possible to make this with 2 different colors or microcord. Either way it would be awesome to see more designs that could be made into necklaces.
I feel like with the right jig and modifications to the pattern you could make one of those90s bead lizard things this way. I know there's other ways but I feel like this would make a very satisfying way to do it
Hi. I watched the Thors Hammer video and thought it was awesome. You yourself a jig and a pin thing (to pull the parachord) neither of which I have. Are they needed or not and if they are is there a way I can make one.
As long as the number of crossovers is even, it should work exactly the same way for longer and/or wider weaves. You just need to figure out something suitable to use as scaffold.
@@TheWeaversofEternity The 2021 live-action movie. I even have a link to the scene here (no spoilers, don't worry) ua-cam.com/video/VzJh8YnR1iw/v-deo.html
@@xxn1njaxg0dxx Ohh right. I did actually watch that movie, I just forgot about that scene. I'll see if I can figure out what kind of bracelet that is.
You definitely could, but at that point you would need a bunch of wooden dowels or something unless you have an abnormal amount of fingers on one or both of your hands.
I have mild CP on my right side. I can do most of these things but it takes a little longer. My right hand doesn’t like it. If I can’t do a movement I figure out how to get it done. It’s great PT for me my hand.
If you read the description, I've credited him there. Anytime I use an idea or concept from someone else I do my best to credit them in the description. I might forget here and there, but I try my best to make sure credit is always given where it is due.
LEFT HANDED MIRROR For Tying Portion: ua-cam.com/video/TfT9CrRw_G8/v-deo.html
GET MY FREE EBOOK! ▶ www.weaversofeternity.com/freebook
I only do them for when techniques may differ for a left handed person.
I am 😊
Just finished with mine. The tightening was a bit of a challenge but I finally got it done. Wearing it now. Thanks
I finished my rune stone necklace! 🎉
Finally made it done! Tightening the knot is a bit of difficult, but I made it.
Thanks for your video🎉
I think this can also be made into a bracelet. Cool!
I thought they were mini-oven mitts when I first saw them! Nice weave.
😂 💡why (k)not!?
It would look nice with a stone mounted in it.! Super stuff
I think that I am going to practice making this before actually deciding on what color that I want my rune!
That would make a nice big toggle for a duffel bag zipper.
Someone needs to come up with a crimp tool that lets you shape paracord ends to a point.
I’ve seen guys twist the melted ends into a point. Spent the morning burning my fingertips trying to imitate, maybe I’m not living right!
It takes a little practice, but if you lay the cord down on a flat surface and, using a sharp _knife_ ( *not* scissors), cut *diagonally* instead of straight across the cord, it’s possible to get a much more pointed end when you melt it. Also, you have to be very careful when you go to melt it because the pointed end wants to melt first, basically destroying the point you’re trying to get. It helps to begin melting a little bit below/behind the cut, then move your flame toward the end. It’s not a perfect solution and I’ve had days where the cord just doesn’t want to cooperate, but it works beautifully when you get it right. However, TBH, it’s just easier and way less time consuming to use a lacing needle.
Guys, no crimp tool needed.. just melt the end until it's somewhat hard about a 1/4 or so. Then use fine scissors or a razor blade and cut diagonally, much easier than trying to shape it or laying it on a surface and all that.. just burn a bit the end not too much. Than just cut the point u want..
@@-iceraptor- Awesome Tip!!
You Can Wear Rubber Fingertip Covers To Protect From Burns!!
Kind of Like The Rubber Tips Bankers Use Counting Money!!
But Check Out The Tips Here In The Comments Section!!
Nice little project, only took about 10 mins for the knot part. Do recommend if you have slender digits but large knuckles you wind the cord loosely!
I saw a short on this knot, maybe from you, and got a hank and started weaving. I got 5 on there so far, and will probably keep going as far as I can.
Very cool project. I’m in the tightening process right this minute. 😊
Cool! I've been looking for some kind of paracord pendant design for a while now. Thanks again.
I wonder if it's possible to make this with 2 different colors or microcord. Either way it would be awesome to see more designs that could be made into necklaces.
Use two different colored cords side by side for two tone.
That is really cool! Thank you for teach us this amazing necklace
This is awesome Tim. Awesome work bro
I feel like with the right jig and modifications to the pattern you could make one of those90s bead lizard things this way. I know there's other ways but I feel like this would make a very satisfying way to do it
I'm brasilian, your videos are so good
I made dice with this pendent, which knot do you think would be a good knot for a game peice?
looks really nice!
just made one! it looks awesome!
Nice work
Great instruction
Thank You 🤠
Hi. I watched the Thors Hammer video and thought it was awesome. You yourself a jig and a pin thing (to pull the parachord) neither of which I have. Are they needed or not and if they are is there a way I can make one.
My brain is trying and failing to make it look like something. I like it though. I can see having a few around. Do men wear these?
Can this be extended beyond your had to make a 4" knot/tab?
As long as the number of crossovers is even, it should work exactly the same way for longer and/or wider weaves. You just need to figure out something suitable to use as scaffold.
Thank you for the video ☺️☺️
Can u make a ring with the same strategy and easy for a 5 yr. Old to make?
love this! will make it asap
Hi, i would like to ask, Can you make a bigger one? I'm curious
Thank you! This is very interesting looking.
Your vids are always the best! thank you! Can I get a heart ❤️?
Hello hmmm.can i make a ring ? This was awesome video. Keep it posting,please!
Attempt 2 at asking Tim to make the bracelet from the Mortal Kombat movie, I still can't wrap my head around it
Which Mortal Kombat movie had a paracord bracelet?
@@TheWeaversofEternity The 2021 live-action movie. I even have a link to the scene here (no spoilers, don't worry) ua-cam.com/video/VzJh8YnR1iw/v-deo.html
@@xxn1njaxg0dxx Ohh right. I did actually watch that movie, I just forgot about that scene. I'll see if I can figure out what kind of bracelet that is.
To me looks like a rastaclat with contrasting colors and some sort of slip knot type closure… or knot and loop… 🤷🏻♀️
Interesting..
Thank you!
Me gusta muy original desde Barcelona 😍😍😍
love it!
and now with a red micro paracord weave a real rune into it :D
Hey, that's a great idea!
NICE IDÉAS ..Thanks for sharing 😃🤗❤
My pleasure 😊
Merci, cool !
Where did you get your small Swedish Fid?
From DragonSpikes on Facebook, I'd highly recommend them. Very high quality and well made.
Super cool
Evertime i tryi get it wrong rhe tightening is too hard help me pls
لو سمحت من اين اجد هاذهي الخيوط
Perfect ❣
How much PC should I start with?
0:30
Nice!!👌
Thanks 🙏 coog firi nis artist thank you sumj boy
❤
How long can you make it ? Can you make it long as you want ?
You definitely could, but at that point you would need a bunch of wooden dowels or something unless you have an abnormal amount of fingers on one or both of your hands.
Get a friend to line their fingers up 😂
Can we get a tutorial for those that may not be able to use fingers on one hand.... please... 😊
Same problem. *use a fork. 😊
Genuinely curious, do you weave with one hand? If so, how does that work? 🙂
I have mild CP on my right side. I can do most of these things but it takes a little longer. My right hand doesn’t like it. If I can’t do a movement I figure out how to get it done. It’s great PT for me my hand.
Genial...!!!!!
Cual es la medida del cordón?
Cual es nombre de nudo corredizo??
Bueno
Cool
Eyepatch
Try lining it with rune design like a cross stitch. You know what i mean. XD
Is a good idea! You could use a fid and microcord, make a spider, a cross, a moose head…etc
@@grimtt you got it.
@@grimtt great idea!
Pretty sure this and a few of your other videos are showing designs originally done by J.D. Lenzon of Tying it All Together. Why not credit him?
If you read the description, I've credited him there. Anytime I use an idea or concept from someone else I do my best to credit them in the description. I might forget here and there, but I try my best to make sure credit is always given where it is due.
@@TheWeaversofEternity You normally do. I must have missed it when I looked at the description. It's precisely because you normally do that I asked.
❤
Paracord necklaces are cool but they're a death trap if someone pulls them from behind you.
Guess you missed the part of the video where I showed how to use break away barrels to close the necklace to address that very hazard.
Show
so quik
💕😍👍
олр
Unable to see, bad, not good, make again over.