How do you install the thermostat onto the wall plate? This is why we are all watching this video. You can’t just skip ahead to the thermostat already being on the wall plateb
Hello Thomas. thanks for your message. The thermostat faceplate will attach to the wall plate, You just have to align the thermostat will the wall plate and snap it in place. Please feel free to contact us at 800 468 15 02, through live chat or you can send us a private message to our Facebook or Twitter page under "Honeywell Home. Any of our agents will be happy to help. Our office hours are from Monday - Friday 9 am to 8 pm, Saturday - Sunday 9 am to 5 pm CST. Thank you. - Laura
No kidding, I'm taking both of mine back. They suck. Isn't working. Just goes hotter and hotter and wont shut off. I came here to check my wiring, we all see how that worked out.
I guess installation of thermostat and programming of thermostat means different things to different people....UA-cam need to start deleting useless vids
Hi there, thank you for sharing your feedback. We'd love to help out with anything you might need to get your thermostat installed and programmed so you can use it as intended. Feel free to contact us at 1-800-468-1502 or via social media (ref #01455712) and we'll make sure everything is working properly. Thank you again for your feedback and we hope you enjoy the rest of your day. -Kari
Actually show installing the wires. The red wire port has a silver wire in it already. You could speak to how you actually get the red wire in. I’m returning those thermostats too.
Hi Frank, the day of the week can be changed from the setup menu. See direction below. 1. Press System & Fan. 2. Press and hold the center key until the screen changes. 3. 120 will be displayed on the left, tap next until 0150 is displayed. 4. The number to the right of 0150 is going to be the date. Please see the following link to view the installer guide. customer.resideo.com/resources/techlit/TechLitDocuments/69-0000s/69-2206EF.pdf -Joey
This model seems to have some sorts of problems from many viewers below. My wife and daughter did not like this model. I bought it because it was on sale. I got "fan on" running good and "heat on" running good at 68 degree, not test cold yet (it is very cold this morning about 40 degree F). So far, I could not adjust the "day" showed at the left top corner (it always shows Tue)
Hi Rosemary, if you need assistance with wiring your thermostat we'd be more than happy to help! You can find all the ways to contact us here: www.resideo.com/us/en/support/ -Jerry
where can i purchase a honeywell rth 76000D 1006? i see one on amazon similar, but it says “honeywell home” and not just “honeywell”. idk if theres a difference or not.
Hi JN, thank you for reaching out to us. If you find it as Honeywell RTH7600D or Honeywell Home RTH7600D it is the same thermostat. You can also find this thermostat on our website: www.honeywellhome.com/us/en/products/air/thermostats/programmable-thermostats/touchscreen-7-day-programmable-thermostat-rth7600d1030-e1/ -Maria
To set the clock please press 'Clock' on the screen, then use the up/down button to adjust the time (you can hold the up/down button to advance more quickly) and press 'Done' once you have the correct time to save and exit. - Maria
Honeywell Home I have 3 of your faceplates in my townhome I was trying to set my AC to come on at 4:00 pm off 10:00 pm I do not need it on in the morning at all. But I am not having any luck with setting them so I use the set now to put them on 77 😕
Hi there, we recommend to check the following link page #10 bit.ly/3g0lsQD. There you will find the steps on how to program the thermostat. If you require further assistance please let us know your inquire on a private message at our Facebook or Twitter page under (Honeywell_Home). If you prefer you may contact our phone support team at 1-800-468-1502. Any of our agents will be happy to help. - Laura
One big problem The video does NOT show wire connecting. EXPLAIN the Rh and Rc jumper! Also, how the hell do you get the backing plate off the damn thermostat to start with!
Hi Merlin, thank you for sharing your feedback with us after watching our video. The Rh and Rc jumper is required if you have a one transformer system. You can remove the jumper if you have a two-transformer system. The thermostat faceplate should pop off from the backplate, which is secured to the wall. Feel free to give us a call at 1-800-468-1502 or send us a message on Facebook or Twitter if you want to discuss this further; we're always happy to help. Thanks again for your feedback and have a great day! -Kari
Honeywell Home How much force does it take to separate the face plate from the back plate? I hope not enough to break the plastic? Because the plastic is bending and I can’t get them to separate using both hands. I’m afraid it’s going to break.
Hi mullinslife09, When detaching the faceplate from the wiring base place both hands around the outer edges, pull away from the wall starting with the top part of the faceplate. -Joey
Do you have manual? You could download it from online. On the page 6 of this manual: Flag #1, Remove metal jumper connecting R and Rc only if you must connect both R and Rc wires. Flag #2, if your old thermostat had both R and RH wires, remove metal jumper. Connect the R wire to the Rc terminal, and the RH wire to the R terminal.
Hi Ozzy49, thanks for reaching out! You can create an schedule through the app, if you'd like us to walk you through please reach out to us on Facebook/Twitter under Honeywell Home. -Charlie
Hi Ahmed, thanks for reaching out! We'd love to help out with any questions you may have about this thermostat. Feel free to give us a call at 1-800-468-1502 and ref #01648870 and we'll be happy to help! Thanks again and we hope you enjoy the rest of your day. -Kari
Seriously lacking any kind of useful information such as how to label and match the wires to the right connector, how to attach the wires, no warnings about turning off power.
Hi J. D. L., thank you for contacting us. We will be happy to help you wiring your thermostat, please let us know how many total wires you have and which terminals are being used on your current thermostat. -Maria
Hi Dana, thank you for contacting us. We are happy to assist you with the wiring installation. We invite you to send us a private message including the system type and the old thermostat's wiring information, if possible. -Alex
doesn't even show how to separate the unit wall plate from the thermostat, when it is taken out of the box. doesn't show how to remove and reattach the wires. Worthless for someone who is new
Wiring is very simple. I just bought this model because it was on sale, but my family did not like it, too complicate. Wiring: Red connects to R, White connects to W, Blue connects to C, Green connects to G, and Yellow connects to Y.
Wow, what a useless video. Doesn't show removing old and installing new, doesn't show hooking up wires, glosses over set up and refers to web site for instructions. What ever happened to actually providing an instruction book? Makes me wonder if I should bother buying one.
How do you install the thermostat onto the wall plate? This is why we are all watching this video. You can’t just skip ahead to the thermostat already being on the wall plateb
Hello Thomas. thanks for your message. The thermostat faceplate will attach to the wall plate, You just have to align the thermostat will the wall plate and snap it in place. Please feel free to contact us at 800 468 15 02, through live chat or you can send us a private message to our Facebook or Twitter page under "Honeywell Home. Any of our agents will be happy to help. Our office hours are from Monday - Friday 9 am to 8 pm, Saturday - Sunday 9 am to 5 pm CST. Thank you. - Laura
Hi, if there isn't a release button on the top or bottom of our thermostats, you can give them a light tug to get them off. -Jay
No kidding, I'm taking both of mine back. They suck. Isn't working. Just goes hotter and hotter and wont shut off. I came here to check my wiring, we all see how that worked out.
How do I remove the faceplate? Really seems like I'm doing it wrong with a tug
Seriously? He’s going to jump that far ahead, right in the beginning of the video???
I guess installation of thermostat and programming of thermostat means different things to different people....UA-cam need to start deleting useless vids
Hi there, thank you for sharing your feedback. We'd love to help out with anything you might need to get your thermostat installed and programmed so you can use it as intended. Feel free to contact us at 1-800-468-1502 or via social media (ref #01455712) and we'll make sure everything is working properly. Thank you again for your feedback and we hope you enjoy the rest of your day. -Kari
Actually show installing the wires. The red wire port has a silver wire in it already. You could speak to how you actually get the red wire in. I’m returning those thermostats too.
Hi Jake, this thermostat does not have Min and Max temperature settings. -Jay
didn't show anything important
Unable to change the day, there does not appear to be "correct" instructions on how to do this.
Is it possible to change the day of the week without rebooting the whole system?
When mine was installed it was set with the wrong day of the week
Hi Frank, the day of the week can be changed from the setup menu. See direction below.
1. Press System & Fan.
2. Press and hold the center key until the screen changes.
3. 120 will be displayed on the left, tap next until 0150 is displayed.
4. The number to the right of 0150 is going to be the date.
Please see the following link to view the installer guide.
customer.resideo.com/resources/techlit/TechLitDocuments/69-0000s/69-2206EF.pdf -Joey
This model seems to have some sorts of problems from many viewers below. My wife and daughter did not like this model. I bought it because it was on sale. I got "fan on" running good and "heat on" running good at 68 degree, not test cold yet (it is very cold this morning about 40 degree F). So far, I could not adjust the "day" showed at the left top corner (it always shows Tue)
By saying iNSTALLATION ONE WOULD ASSUME YOU WOULD SHOW THE MOST IMPORTANT ISSSUE> CONNECTING THE WIRES. This video is pointless!
Hi Rosemary, if you need assistance with wiring your thermostat we'd be more than happy to help! You can find all the ways to contact us here: www.resideo.com/us/en/support/ -Jerry
How to change the "day" at the top left corner, I always have it on Tue? Today is Friday, it should show "Fri." at the top left corner.
where can i purchase a honeywell rth 76000D 1006? i see one on amazon similar, but it says “honeywell home” and not just “honeywell”. idk if theres a difference or not.
Hi JN, thank you for reaching out to us. If you find it as Honeywell RTH7600D or Honeywell Home RTH7600D it is the same thermostat. You can also find this thermostat on our website: www.honeywellhome.com/us/en/products/air/thermostats/programmable-thermostats/touchscreen-7-day-programmable-thermostat-rth7600d1030-e1/ -Maria
I moved into a new home and the day is wrong. How can I change this?
How do you reset the time when clock is wrong
Hi there, how far is the time off? -Jay
Honeywell Home it’s showin 3:10 but real time is 7:07.
To set the clock please press 'Clock' on the screen, then use the up/down button to adjust the time (you can hold the up/down button to advance more quickly) and press 'Done' once you have the correct time to save and exit. - Maria
Honeywell Home I have 3 of your faceplates in my townhome I was trying to set my AC to come on at 4:00 pm off 10:00 pm I do not need it on in the morning at all. But I am not having any luck with setting them so I use the set now to put them on 77 😕
Hi there, we recommend to check the following link page #10 bit.ly/3g0lsQD. There you will find the steps on how to program the thermostat. If you require further assistance please let us know your inquire on a private message at our Facebook or Twitter page under (Honeywell_Home). If you prefer you may contact our phone support team at 1-800-468-1502. Any of our agents will be happy to help. - Laura
One big problem The video does NOT show wire connecting. EXPLAIN the Rh and Rc jumper! Also, how the hell do you get the backing plate off the damn thermostat to start with!
Hi Merlin, thank you for sharing your feedback with us after watching our video. The Rh and Rc jumper is required if you have a one transformer system. You can remove the jumper if you have a two-transformer system. The thermostat faceplate should pop off from the backplate, which is secured to the wall. Feel free to give us a call at 1-800-468-1502 or send us a message on Facebook or Twitter if you want to discuss this further; we're always happy to help. Thanks again for your feedback and have a great day! -Kari
Honeywell Home How much force does it take to separate the face plate from the back plate? I hope not enough to break the plastic? Because the plastic is bending and I can’t get them to separate using both hands. I’m afraid it’s going to break.
Hi mullinslife09,
When detaching the faceplate from the wiring base place both hands around the outer edges, pull away from the wall starting with the top part of the faceplate. -Joey
Do you have manual? You could download it from online.
On the page 6 of this manual:
Flag #1, Remove metal jumper connecting R and Rc only if you must connect both R and Rc wires.
Flag #2, if your old thermostat had both R and RH wires, remove metal jumper. Connect the R wire to the Rc terminal, and the RH wire to the R terminal.
hI, can I control the schudule of the week on my Phone?
Hi Ozzy49, thanks for reaching out! You can create an schedule through the app, if you'd like us to walk you through please reach out to us on Facebook/Twitter under Honeywell Home. -Charlie
Which wires go where?
Hi Mordalo, thanks for the question. What letter terminals are being used on the current thermostat? -Joey
DOES RTH7600D WORK WITH AUXILARY HEAT STRIPS?
Hi Craig,
Yes, the RTH7600D is compatible with electric heat strips as a backup for your heat pump. -Joey
Where the wear ???
Hi Ahmed, thanks for reaching out! We'd love to help out with any questions you may have about this thermostat. Feel free to give us a call at 1-800-468-1502 and ref #01648870 and we'll be happy to help! Thanks again and we hope you enjoy the rest of your day. -Kari
Seriously lacking any kind of useful information such as how to label and match the wires to the right connector, how to attach the wires, no warnings about turning off power.
so...yeah...about the wiring?
Crap, no wiring shown :(
Hi J. D. L., thank you for contacting us. We will be happy to help you wiring your thermostat, please let us know how many total wires you have and which terminals are being used on your current thermostat. -Maria
This is useless
It would be more helpful if you actually showed installing the red wire. Not a useful video at all.
Hi Dana, thank you for contacting us. We are happy to assist you with the wiring installation.
We invite you to send us a private message including the system type and the old thermostat's wiring information, if possible. -Alex
doesn't even show how to separate the unit wall plate from the thermostat, when it is taken out of the box. doesn't show how to remove and reattach the wires. Worthless for someone who is new
what a useless video, doesn't show wiring
Wiring is very simple. I just bought this model because it was on sale, but my family did not like it, too complicate. Wiring: Red connects to R, White connects to W, Blue connects to C, Green connects to G, and Yellow connects to Y.
Wow, what a useless video. Doesn't show removing old and installing new, doesn't show hooking up wires, glosses over set up and refers to web site for instructions. What ever happened to actually providing an instruction book? Makes me wonder if I should bother buying one.