can u tell us if you are using 50mm or 35mm piston we have used 50mm in the past but have not got it to work with 25 mm so we want to know if its possible. thanks
@@FI1ckz_TV if you are asking about how I mounted it to the clamp part. (We don’t reccomend this for newer v5 or smc we have old messed up ones) but we use a lock collar and screw through a c-channel and the collar directly into the piston rod.
glad to see other teams doing this. first saw it on 62A a while ago. good job, good video.
NOT AGAIN, I CAN'T DO IT ANYMORE
IT'S BEEN 4 YEARS, I CAN'T DO IT AGAIN
These are about to be everywhere
Nice! I saw this on a video from a few years ago and decided to try it
Good job love the build quality 💯
The clamp has ok build quality but intake has none 💀
@@ltcrobotics6271 ok?
😂
Its back
i’m scared
Amazing work...congratulations.
Can you make a video about the intake like the flex wheel part like how does it move and etc
do u use 2.75 or 3.25 inch wheels on your drive?
In this robot is 3.25 but we reccomend 2.75 for better acceleration
does the piece being perpendicular to the top of the goal make it lock kinda
can u tell us if you are using 50mm or 35mm piston we have used 50mm in the past but have not got it to work with 25 mm so we want to know if its possible. thanks
@@sideswifter7541 we are using the medium 50mm pistons
I see that most of the wheels are 3.25 but may I ask why the 2nd wheel from the goal collector is a 2.75. Is it a design choice or something else.
Sorry for a late response but it’s because this was from our worlds drivetrain and we didn’t have time to switch that wheel to be like the rest
Kuphal Harbor
How did you set up your piston mount is it on a screw or shaft ive been trying to learn what people are using
@@FI1ckz_TV both mounts are using screw joints
@@ltcrobotics6271 what is holding the piston to it
@@FI1ckz_TV if you are asking about how I mounted it to the clamp part. (We don’t reccomend this for newer v5 or smc we have old messed up ones) but we use a lock collar and screw through a c-channel and the collar directly into the piston rod.
@@ltcrobotics6271 all of my lock collars are not big enough
@@ltcrobotics6271 my lock collars wont fit around a screw
How far off the floor is the bottom
It’s very close to the floor like there might be 1/8” of clearance
Do you use a single or double acting piston?
It’s a double repurposed to be used as a single to save on air
@@ltcrobotics6271 okay because we just 2 doubles but they didn't work. So we are about to switch to singles.
simple is better!
how wide is the dt?
28 holes
bruh 2775J ripoff?
@@kveeesh this is a much much diff clamp design lol and the video meme was from longer ago
Lesch Stream