great job ! don't worry bout haters they have nothing better to do. the chain clip remark was however very pertinent to the safety and longevity of the master links survival . you want the round part of the master link clip at the front of direction of travel . having the two sides of the clip leading can cause the clip to get caught on anything causing it to disengage and then not good if chain separates. could most likely bunch up rapidly and lock the tire instantly. or worse the chain could flail around a few times before lock up or thrown and you could have a steel weed eater line thrashing your leg . still everybody starts somewhere and your start was way ahead of most I've seen . Again bravo !keep building your dreams. you gotta knack for inventing .Erock
Not too mention the other solid removable link that goes on before the clip is on the other side of the chain. I can't believe the chain didn't vibrate itself loose.
Imy only negative thought is I feel that engine is severe overkill for a bike like that. You can get the same results with a 35cc weed wacker engine. Unless you are doing gearing, also, its a super unstable platform and never going to see a top speed.
@werewolf74 I agree with you on that for sure. I hope my comment did not offend you and I apologize if it did. I should have pointed out some of the distasteful ( not constructive criticisms)comments by some who really were just tearing the kid down. I've taken advice and criticism and have just gleaned anything that was profitable which he will probably view that way with yours hopefully.
Menuda Bestia la bicicleta motorizada me dejo sin palabras esta muy bien yo pienso ponerle un motor estacionario a un scooter que tenía un motor de desmalezadora de 52 cc y ahora el que le adaptaré es de 6.6 cc el estacionario mi estimado espero que me quede así rápido como el suyo
Не особо, сейчас законы тупые: с 16 можно до 125 кубов и 15 сил, а с 18 любой объем. Что касается этой самоделки, то там ее регистрировать надо@@ХОББИ_Олега
Во времена СССР выпускались велосипедные двигатели КО, также популярные в то время в моей стране. Сегодня такие двигатели производят, наверное, только китайцы, но они гораздо более низкого качества, чем советские.
You wouldn't catch me riding that thing.. all that heavy 4 stroke weight engine sitting up high on the frame like that.. no way. Soon as you build up some speed and lean into a corner, down you go!
i can't get my head around how the clutch works could u maybe explain that part also does it reallly need a clutch to slow down the engine since there is resistance to the raise
This is a centrifugal clutch similar to those used in chainsaws. In a combustion engine, especially a piston engine, you will always need a clutch, unless you have an automatic transmission. Centrifugal clutch Animation ua-cam.com/video/Cwcz_0q3_0k/v-deo.html
Прикольно, что сохранил переключения, но вопрос к глушителю, который находится в притык к ноге. Ногу не жарило?). Я двигатель предпочитаю ставить на багажник ( самоваренный)
I guess so much for the BICYCLE (pedaling) part. . . It seems that you tried to make it work . From the head cam it seems like a pretty shaky ride.!.!.! Nice, Thank You.
Рама велосипеда справится с нагрузкой. Единственная проблема - механизм переключения передач на велосипеде, который у меня сломался, поэтому цепь велосипеда должна быть заменена более прочной и механизм переключения передач удален.
El peligro es que si llevas pantalones largos y anchos, estos pueden atascarse en la cadena que sale del motor, quiza aun no le ha sucedido pero hay posibilidad, saludos
In this way, man created "The Motorcycle",, better versions may be available. "Oi! How do I get to Tipperary from here??" Well, you don't want to start from here anyway,,
If I spent that much money on a good engine like that I certainly would also use a decent bike and not a POS like that, Structural integrity has been lost during your mickey mousing. 😩 DeathTrap.
great job ! don't worry bout haters they have nothing better to do. the chain clip remark was however very pertinent to the safety and longevity of the master links survival . you want the round part of the master link clip at the front of direction of travel . having the two sides of the clip leading can cause the clip to get caught on anything causing it to disengage and then not good if chain separates. could most likely bunch up rapidly and lock the tire instantly. or worse the chain could flail around a few times before lock up or thrown and you could have a steel weed eater line thrashing your leg . still everybody starts somewhere and your start was way ahead of most I've seen . Again bravo !keep building your dreams. you gotta knack for inventing .Erock
Not too mention the other solid removable link that goes on before the clip is on the other side of the chain. I can't believe the chain didn't vibrate itself loose.
@@supersteve1224Он потом поставил замок на цепи как положено. В видео чуть позже это видно.
Imy only negative thought is I feel that engine is severe overkill for a bike like that. You can get the same results with a 35cc weed wacker engine. Unless you are doing gearing, also, its a super unstable platform and never going to see a top speed.
@werewolf74 I agree with you on that for sure. I hope my comment did not offend you and I apologize if it did. I should have pointed out some of the distasteful ( not constructive criticisms)comments by some who really were just tearing the kid down. I've taken advice and criticism and have just gleaned anything that was profitable which he will probably view that way with yours hopefully.
Menuda Bestia la bicicleta motorizada me dejo sin palabras esta muy bien yo pienso ponerle un motor estacionario a un scooter que tenía un motor de desmalezadora de 52 cc y ahora el que le adaptaré es de 6.6 cc el estacionario mi estimado espero que me quede así rápido como el suyo
nice video, loved the transitions!
i hope your master link worked on your chain
Hehe. I get it.
@@uesleiportonope you didn’t 😂
Kool that's good the guy got talent I like that
Just for the lock on the chain a huge like! )))
Я из России, у нас очень популярны такие самоделки ещё со времён СССР
Сейчас для самодельщиков хорошие времена: всё в доступе, всё, что хочешь, можно приобрести.
Не особо, сейчас законы тупые: с 16 можно до 125 кубов и 15 сил, а с 18 любой объем. Что касается этой самоделки, то там ее регистрировать надо@@ХОББИ_Олега
Во времена СССР выпускались велосипедные двигатели КО, также популярные в то время в моей стране. Сегодня такие двигатели производят, наверное, только китайцы, но они гораздо более низкого качества, чем советские.
Maybe a bit dangerous and high geared but I enjoy the point and weld philosophy !
Gran video, me dio ideas para hacer mi bicimoto aca en mexico. Gracias y saludos desde la tierra azteca🙋♂
You wouldn't catch me riding that thing.. all that heavy 4 stroke weight engine sitting up high on the frame like that.. no way.
Soon as you build up some speed and lean into a corner, down you go!
引擎不掛後面嗎，掛哪會燙到吧
the earrape at the start 10/10
Bravo 👏
Hvala puno znaci podrska.
i can't get my head around how the clutch works could u maybe explain that part also does it reallly need a clutch to slow down the engine since there is resistance to the raise
This is a centrifugal clutch similar to those used in chainsaws. In a combustion engine, especially a piston engine, you will always need a clutch, unless you have an automatic transmission.
Centrifugal clutch Animation
ua-cam.com/video/Cwcz_0q3_0k/v-deo.html
Nice my Friend
Nice work,A metal triangle 📐 were you cut would be nice for safety !!
hi, did you use any gear, like cvt? , if you didn't, how could you move without stopping the engine?
He clearly shows a centrifugal clutch being installed.
Super tare, ok.
Nothing like a hto croch
💥👊😎💥 🚴♂️💥💨💨
Прикольно, что сохранил переключения, но вопрос к глушителю, который находится в притык к ноге. Ногу не жарило?). Я двигатель предпочитаю ставить на багажник ( самоваренный)
200cc this thing will soar. If it had wings it would fly.
Thanks for the insperation.
Como usas el embrague
4:29 time stamp...how did so many people not see this??
Фаберже не сварились?
tue eres el hombre licenciado
Lawnmower engine?
I guess so much for the BICYCLE (pedaling) part. . . It seems that you tried to make it work . From the head cam it seems like a pretty shaky ride.!.!.! Nice, Thank You.
un cafecito para el recreo ja ja ja ja ja
So was 60 km /hr ur top speed ?
crazy brain 😮
Looks so dangeorus for a MTB,And that motor looks expensive in some countries
How Many Feet Was Your Chain?
Просятся крылья и какой никакой хвост😂
Nice
como se pone una proteccion a la transmision.es peligroso
Nic😮😮
El problema es el caño de escape.,queda muy cerca de la pierna.,deberia desviarlo
Здравствуйте хотел задать вам такой вапрос двигатель сколько лошидей?????
7 л.с
El es el Hombre
Как долго сможет продержаться задний привод?
Разве . Рама велосипеда выдержит нагрузку ?
Рама велосипеда справится с нагрузкой. Единственная проблема - механизм переключения передач на велосипеде, который у меня сломался, поэтому цепь велосипеда должна быть заменена более прочной и механизм переключения передач удален.
Master link was wrong ✔️
В этом двигателе четыре крепёжных болта. Лучше я думаю ставить распорки, чем вешать двигатель на одну профилированную трубу.
El peligro es que si llevas pantalones largos y anchos, estos pueden atascarse en la cadena que sale del motor, quiza aun no le ha sucedido pero hay posibilidad, saludos
Como pones el embrague
Is this Plazma® cake from Serbia ?
Is that motorized bike legal ? Becouse it's very speedy and dangerous !
Лихо!!!
cool bike check out mine. 220cc
Wow, nice bike.
Don’t eat all that sugar!!
Клади оба яйца слева, чтобы разом и не мучиться дважды. Так человечней, чтоли...
In this way, man created "The Motorcycle",, better versions may be available. "Oi! How do I get to Tipperary from here??" Well, you don't want to start from here anyway,,
Nutecias
If I spent that much money on a good engine like that I certainly would also use a decent bike and not a POS like that,
Structural integrity has been lost during your mickey mousing. 😩
DeathTrap.
Looks like he is east european or something so its all good
@@arielbemeliahu8619 🤣😆👍🏼👌🏼✌🏼
the engine is rather cheap it's used for farm accessories and only costs about 40-50$ including carborater fuel tank throttle and kill switch
@@theduck3109$250
@@John-ds6jz I can buy a Honda GX200 clone here in the EU for $100 (shipped from Germany).
Should have used a motorized bike sprocket on the back wheel and got a wide pedal crank kit if you can pedal it it's legal
I agree, but it would require more time and money. I made this project on the fly, just for fun.
I have a new video coming out in the next few days (where I built a motorcycle) that I've been really working on, I hope you like it.