What are your thoughts on using 20v 10ah tool batteries for graphs a,nd livescope. Seems to me that would be the way to go for clean power. Have a great day.
I have a lvs 32 and using an older echomap 93 plus model. Unfortunately no means to upgrade graphs at this current time. Any advice on how I can clear up similar issues with what I have? And also at times, I have an issue with picking up my lure when it's 50+ feet out, then when I bring it within 40 or so ft, it picks it up just fine.
Good job buddy im still running old faithfulll on software but you could be on something i seen it that bottom is results same stretched out to 80 feet that bottom i need
Excellent video. I will use this advice. I saw something that made me wonder. I also have seen the oxygen trails from the lure being pulled aggressively through the water. I guess this is a good thing. This oxygen trail shows there is oxygen for the fish to survive. Have you ever fished a part of the lake or depth of a lake that didn’t create oxygen trails with your bait? Maybe no oxygen trails could mean this portion of the lake is a dead zone?
So dirty water use moss or black emerald and increase color limit.. what have you found is the best color for gin clear water ?? Or does it not matter as much ??
Randy, I have an unrelated question, but your image shows your forward zone going out to 27’ at the surface. I assume this is because your transducer depth is set to a depth of about 2.5’. I have suspected for a while that AHRS is controlling the sonar angle and not the vertical angle of the transducer. Since your transducer is mounted on a separate shaft on your trolling motor, you are unable to easily tilt the transducer up to change the cone angle. I am working to see the splash down at about 8’ out from the transducer. I have a pole mounted transducer and even when I tilt it upward (attempting to adjust the sonar cone) I see no difference on screen. It seems to me that AHRS is in control of the sonar cone and not the angle of the transducer pole. Is this thinking correct? Please elaborate… I fished yesterday and lifted the transducer to ~6” below the water. I set the transducer depth to 0” in the sonar setup. I can see the 8’ splash down now, but I want to experiment more in order to have the bottom depth displayed accurately, which with these setting is off. Just had a thought - all I need to do is set the transducer to the actual depth to get accurate readings. Hope this doesn’t detract from the close splash down. Is AHRS working as I mentioned above? Does AHRS over ride the angle of the transducer pole? On behalf of myself and the huge number of LS users that have and are benefiting from your help, A HUGE THANK YOU!
Someone can help me? I bought a new lvs32 with gls10 box, at every start it tells me that I can update the Gls box but once I click on start it says 100% and under it error , press ok to restart
@@JodyMcCarty the problem is, when I download the update and put it into sd card and put sd card in my unit, nothing happen, it won’t start update from sd card
Ya need to mic up when you're away from the camera. Your really hard to hear. But great video going to give this a shot. As we have a lot of garbage in the water this time of year.
Hey my brother! Love your channel. I live on a lake in north Louisiana where the pollen has been falling for a couple of weeks now. I went fishing two days ago and tried your exact settings (106sv) and found that going from Amber to emerald green made a very slight difference, but the color gain/limit changes made no difference. Bottom line, I still couldn't see my bait. That said, I want to let you know that I can see my bait in other areas of the lake, i.e. - if you fish in a spot and can't see your bait then move, try opposing banks. Appreciate you bro. Jeff
@@The_Garmin_Guru LOL. Come on down cuz. I live on Lake Darbonne in Farmerville, LA and things are heating up here! Heck, I'll even put you up at one of the rentals on the lake. You can fix my crap and fish too! LMBO.
Hey man, I still have the 32. Do you think you could do a rundown on the settings for the new update for forward mode? And what color pallets would be best?
Great video! I was worried about silted up water. A few places I fish get pretty churned up from boat traffic. I just installed a 34 & 106. Should I do update now or wait for next one? Been hearing horror stories on latest.
Been a sub for a while now, slow to warm up to your vids, but this one was really good. Has help me a lot with my 122sv’s. I don’t mind the snow if I can see my bait whether it’s a 10 xd, wacky senko or 1/32 oz baby shad. I’ll be watching all your updates. Thanks!.
@@The_Garmin_Guru Not personal, just lots of different and some conflicting “opinions” on the internet. Just takes me awhile to get comfortable with someone’s channel.
Bass pro has a really good deal on garmin right now. I have been thinking about getting the ultra 106sv it’s $999. Right now. I don’t have deep pockets and was considering getting 2 of these ultra 106sv one for the dash and one for the bow. I also was considering getting the lvs32 because it is on sale as well for $999. Would I be making a mistake? If anyone has any suggestions please help because I can’t afford to make a mistake
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Thanks for color limit info , I just installed the last update
What are your thoughts on using 20v 10ah tool batteries for graphs a,nd livescope. Seems to me that would be the way to go for clean power. Have a great day.
I’ve heard of people doing this with good success. I don’t do it but know people who do
That was some good information, definitely cleaned up the screen. Looking forward to trying it out. Thanks for all ur hard work!👍🏻🎣🇺🇸
Thanks for watching!
Really surprised by the good returns AND certainly the flatter bottom. Need to try this out soon. Thx GG 😊🇧🇪
You’re welcome 😊
Thank you for the great advice... I was playing with the color limit this weekend and it's a game changer!
Glad it was helpful!
I have a lvs 32 and using an older echomap 93 plus model. Unfortunately no means to upgrade graphs at this current time. Any advice on how I can clear up similar issues with what I have? And also at times, I have an issue with picking up my lure when it's 50+ feet out, then when I bring it within 40 or so ft, it picks it up just fine.
Appreciate the knowledge always shared! Why does my depth keeps bouncing around on screen?thanks
Good job buddy im still running old faithfulll on software but you could be on something i seen it that bottom is results same stretched out to 80 feet that bottom i need
Excellent video. I will use this advice. I saw something that made me wonder. I also have seen the oxygen trails from the lure being pulled aggressively through the water. I guess this is a good thing. This oxygen trail shows there is oxygen for the fish to survive. Have you ever fished a part of the lake or depth of a lake that didn’t create oxygen trails with your bait? Maybe no oxygen trails could mean this portion of the lake is a dead zone?
Haven’t thought of that. You’re getting deep I like it
Just curious, what transducer was in this video the LVS32 or LVS34? Maybe i missed that...thanks
34. I gave my 32 away in a giveaway
So dirty water use moss or black emerald and increase color limit.. what have you found is the best color for gin clear water ?? Or does it not matter as much ??
Gin clear water I think you should prolly choose your favorite
Randy, I have an unrelated question, but your image shows your forward zone going out to 27’ at the surface. I assume this is because your transducer depth is set to a depth of about 2.5’. I have suspected for a while that AHRS is controlling the sonar angle and not the vertical angle of the transducer. Since your transducer is mounted on a separate shaft on your trolling motor, you are unable to easily tilt the transducer up to change the cone angle. I am working to see the splash down at about 8’ out from the transducer. I have a pole mounted transducer and even when I tilt it upward (attempting to adjust the sonar cone) I see no difference on screen. It seems to me that AHRS is in control of the sonar cone and not the angle of the transducer pole. Is this thinking correct? Please elaborate…
I fished yesterday and lifted the transducer to ~6” below the water. I set the transducer depth to 0” in the sonar setup. I can see the 8’ splash down now, but I want to experiment more in order to have the bottom depth displayed accurately, which with these setting is off. Just had a thought - all I need to do is set the transducer to the actual depth to get accurate readings. Hope this doesn’t detract from the close splash down.
Is AHRS working as I mentioned above?
Does AHRS over ride the angle of the transducer pole?
On behalf of myself and the huge number of LS users that have and are benefiting from your help,
A HUGE THANK YOU!
I’m gonna make a video on this soon
@@The_Garmin_Guru Thanks Randy. I’ll be on the lookout for it.
Someone can help me? I bought a new lvs32 with gls10 box, at every start it tells me that I can update the Gls box but once I click on start it says 100% and under it error , press ok to restart
Are you updating via active captain or SD card?
@@The_Garmin_Guru first I tried via app, now I watched ur video bout sd card update, but same thing happen :(
Had this happen. Update with the SD card. Power up all devices, screens, black box etc and then insert the SD card. It will apply it.
@@JodyMcCarty the problem is, when I download the update and put it into sd card and put sd card in my unit, nothing happen, it won’t start update from sd card
@@vinhleeh that means you’re not extraythe files correctly before putting them on the card
Ya need to mic up when you're away from the camera. Your really hard to hear. But great video going to give this a shot. As we have a lot of garbage in the water this time of year.
Which part are you speaking of bud
As always great info fella. I'm going to pick up a lvs34 this week. Looking forward to more on color limit.
Go chaddyboys.com and tell Chad I sent you.
The returns are amplified due to the gain being turn up some. Look forward to some more on color limit.
Thanks
I said that in the video
Thanks for this. I got so frustrated at Darbonne the other day that I went back to factory settings and started over!! Haha.
It happens
about the same settings i posted a couple of months ago on your other color limit video for pollen and sediment. good job.
I will check it out
You need to do the test when there’s actually pollen in the water turned up gain when there’s pollen in the water it’s going to get worse?
I never have problems with pollen. But it will work. Debris and mud combination is pretty close.
Hey my brother! Love your channel. I live on a lake in north Louisiana where the pollen has been falling for a couple of weeks now. I went fishing two days ago and tried your exact settings (106sv) and found that going from Amber to emerald green made a very slight difference, but the color gain/limit changes made no difference. Bottom line, I still couldn't see my bait. That said, I want to let you know that I can see my bait in other areas of the lake, i.e. - if you fish in a spot and can't see your bait then move, try opposing banks. Appreciate you bro. Jeff
If I got on your boat and set it up I guarantee you I could get you to be able see your boat
@@The_Garmin_Guru LOL. Come on down cuz. I live on Lake Darbonne in Farmerville, LA and things are heating up here! Heck, I'll even put you up at one of the rentals on the lake. You can fix my crap and fish too! LMBO.
Thanks for the info about the color limit & the pollen in the water
No problem!
Hey man, I still have the 32. Do you think you could do a rundown on the settings for the new update for forward mode? And what color pallets would be best?
I’ll do one soon.
Nice, the pollen seems to be clearing up
Great video! I was worried about silted up water. A few places I fish get pretty churned up from boat traffic. I just installed a 34 & 106. Should I do update now or wait for next one? Been hearing horror stories on latest.
Are you having problems with your picture currently. If not I wouldn’t update
I have not used it yet, it’s straight out of box & on the boat
Been a sub for a while now, slow to warm up to your vids, but this one was really good. Has help me a lot with my 122sv’s. I don’t mind the snow if I can see my bait whether it’s a 10 xd, wacky senko or 1/32 oz baby shad. I’ll be watching all your updates. Thanks!.
Just wondering why you have been slow to warm up to the channel bud
@@The_Garmin_Guru Not personal, just lots of different and some conflicting “opinions” on the internet. Just takes me awhile to get comfortable with someone’s channel.
Are you using the LVS32 or the LVS34?
34 bud
Bass pro has a really good deal on garmin right now. I have been thinking about getting the ultra 106sv it’s $999. Right now. I don’t have deep pockets and was considering getting 2 of these ultra 106sv one for the dash and one for the bow. I also was considering getting the lvs32 because it is on sale as well for $999. Would I be making a mistake?
If anyone has any suggestions please help because I can’t afford to make a mistake
I would defy get the 34 instead. Cleaner picture and much higher ceiling
@@The_Garmin_Guru what are your thoughts on the ultra 106sv that bass pro has on sale and will the 34 work with it
@@jameskrone9629 yes it will work and is a great unit.
Hi,really enjoy your videos. With hearing of updates,Garmin just come out with a new one?
They come out with one every 3 months
@Garmin Guru: All Things Livescope And Fishing wow,didn't know that,Thx for the info.
Interesting I'll have to look into this one Preciate Ya 🐟🎣
It definitely works
Exactly what I was looking for!!
It’s worked for me so far
This worked on my 126. Thanks for the info.
Glad it helped
You don’t happen to have another gls 10 do you to help a young man?
Unfortunately I dont
Thanks for the information. I'll have to try this out.
Yes sir
Your videos are so informative. Really appreciate it man!
Thank you bud
Great video and info thanks
Thanks for watching!
Try turning on the bottom fill It cleans it up more
Bottom fill is garbage unless it’s a completely flat bottom. Won’t work with stumps etc
Awesome video and great information
Thanks for watching
Thank you for the tip
Any time
Welcome to the MS water color
That’s daily in Louisiana lol
Good one
Thanks