Pico 2 Autofire instruction for v4 v4.5 and v5

V4 v4.5 User Community Sourced Settings
Mode TCR value 345
Watts 33W
temperature 500-550F
V5 User Community Sourced Settings
Mode TCR value 200
Watts 38W
temperature 430-500F
Available at www.ineedhemp.com

[@kristofur]

Heads up. To set the auto fire, you do not push the power button and the plus button at the same time. First you push the + button THEN you push the power button and hold both.

[@divinetribe1]

Good point

[@blurclan7486]

I have the exact model you have but for some reason I can reach the auto fire setting

[@divinetribe1]

@@blurclan7486 these are ones I had reprogrammed and are only available from my site www.ineedhemp.com

[@blurclan7486]

@@divinetribe1 yeah I was stupid enough to buy one from another site, guess I didn’t do enough research.thanks

[@vaporwareproducts]

Works great, thanks for a great product and support!

[@originalchunker1387]

Why am I getting a check coil prompt when using auto fire?

[@AndTecks]

AWEEEEE YEAHHHHH BBBOOIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

[@peaceandwealthseeker4504]

i find the faster the heat up the more likely it is to splash. i do a manual heat up and then use your prototype artic fox v5 settings once slowly heated

[@ohitika]

Same especially attached to my water rig. I followed these settings but I have it on about 350 and 18w and it fills my rig up fast enough for my lower temp dabs.

[@vaporwareproducts]

Hey Matt I’ve seen you say you like TC mode with lower temps for 4.5 and here you have different settings -TCR with higher temp settings and TCR values. Which one is best for the 4.5 SIC using a standard box mod battery (not arctic fox)? I have a Maxus Freemax 200w that can do TCR, TC, Wattage modes so trying to figure out which one is best, for my battery in TC mode I can’t adjust the TCR but can in TCR mode. thanks!

[@kyleh5356]

I bought a yocan orbit atomizer but I heard the battery yocan makes are shit so I’m getting this e leaf box mod bcuz you can actually adjust it can I use the same setting for the orbit atomizer?

[@divinetribe1]

Depends on which eleaf mod. Which one ? I would recommend a DNA mod at moment. If that mod does not offer autofire.

[@hiddenleaf414]

Will setting the K Value to 200 effect it’s performance is we use it as a regular ejuice vape?

[@divinetribe1]

The k value is a number given to the mod that tells it how much power it should be generating based off of the coil you are using, for the V5 side and bottom headed cup. The range is usually around 180 to 220

[@YoungFlyMexicanNetwork]

Just ordered mine soon as i seen this csnt wait to experiences this device and all of its capability's

[@toddb6640]

Didn’t you get it

[@dallenedwards6279]

Are you supposed to start hitting it right away? Or do you wait a bit for it to heat then hit it

[@divinetribe1]

let it heat up for about 10 seconds or so ,, i wait until i see vapor coming off bowl

[@Yngvihramn]

Is it possible to lock the resistance like on AF?

[@YoungFlyMexicanNetwork]

Why do you want to lock thr resistance?

[@stephen4121]

Yes you can

[@SavageThrash]

And to think my USB C pico arrives today. Should have waited.

[@Pathasher]

That sucks. sounds like my experience with the Ispire Daab. I set up a order for their honey themed device. A week later they come out with a new model with improvements to fix the flawed design that I ordered. They’re all the same they only want your money the easiest way they can get it.

[@hiddenleaf414]

Isn’t this a USB C Pico?

[@cade2591]

will this work with a voopoo drag

[@divinetribe1]

Yes any atomizer I sell will work the the voopoo. www.reddit.com/r/DivineTribeVaporizers/comments/r4kw6e/v5_with_voopoo_drag_2/?

[@cade2591]

@@divinetribe1 do you recommend using temp control or just wattage?

[@divinetribe1]

@@cade2591 both work but temp control for longevity and better experience

[@user-qz1cr7ft3x]

Even In the video, Matt’s live resistance goes above 1 which tells you his settings aren’t functioning properly.
Just want to warn everyone here. This is a good company , but the pico 2 is not a good mod. Just got mine this week, broke within 5 dabs. Doesn’t work whatsoever and when you ask the community for support - everyone tells you that the you shouldn’t have chosen the pico 2. The support team literally tells you any other mod bought from a third party would’ve been easier to troubleshoot…. 😅 save yourself the headache and lack of support.

[@divinetribe1]

If you bought the pico from ineedhemp.com and it does not work well for you. We would be happy to do a satisfaction refund or exchange. Just email [e-mail]